LR802UKN2-B User’s Manual
Contents: WINDOWS VISTA ...................................................................................3 Driver Installation ........................................................................................................ 3 Uninstalling the Wireless LAN Card.......................................................................... 6 Configuring the Wireless LAN Card.......................................................................... 9 Connecting to an existing network .....................
Windows Vista Driver Installation 1. For installing the Wireless LAN Card driver, go to the directory where the Wireless Adapter Installation stored, then double-click the Setup Program to begin the installation. (Exsample: IS_AP_STA_RT2870_D-3.2.9.0_VA-3.2.9.0_W7-3.2.9.0_RU-4.1.7.0_AU-4.1.3.0 _042412_1.5.19.0WP_Free.exe) 2. Ralink Wireless Network Card Setup Wizard will install the driver on your system.
3. Select "Install driver and Ralink WAN Utility" and then click "Next". 4. Click "Install" to begin the driver installation.
. The Ralink Wireless LAN driver is installing. Please wait. 6. The installation is now complete. 7. When you complete the installation, the utility icon will appear on the system tray ( Please click "Finish". ). You could double-click it to configure wireless network settings.
Uninstalling the Wireless LAN Card 1. For uninstalling the Wireless LAN Card, please go to: Start All Programs Ralink Wireless under Windows environment. Then click "Uninstall – RT2870".
2. Ralink Wireless LAN Setup Wizard prepares to uninstall the driver on your system. Please wait. 3. Click "Yes" to uninstall the Wireless LAN Card driver and utility. 4. Wait for removing the driver and utility.
5. The driver uninstall complete, please click "Finish".
Configuring the Wireless LAN Card Double-click the utility icon in your system tray to begin the utility configuration. Connecting to an existing network 1. Select icon , all available Access Points would be listed. Click on the desired Access Point, and click icon 9 .
2. If you connect to a secured network please type the network security key or passphrase and then click “ ” to connect.
Windows 7 Driver Installation 1. For installing the Wireless LAN Card driver, go to the directory where the Wireless Adapter Installation stored, then double-click the Setup Program to begin the installation. (Exsample: IS_AP_STA_RT2870_D-3.2.9.0_VA-3.2.9.0_W7-3.2.9.0_RU-4.1.7.0_AU-4.1.3.0 _042412_1.5.19.0WP_Free.exe) 2. Ralink Wireless Network Card Setup Wizard will install the driver on your system.
3. Select "Install driver and Ralink WAN Utility" and then click "Next". 4. Click "Install" to begin the driver installation.
5. The Ralink Wireless LAN driver is installing. Please wait. 6. The installation is now complete. 7. When you complete the installation, the utility icon will appear on the system tray ( Please click "Finish". ). You could double-click it to configure wireless network settings.
Uninstalling the Wireless LAN Card 1. For uninstalling the Wireless LAN Card, please go to: Start All Programs Ralink Wireless under Windows environment. Then click "Uninstall – RT2870".
2. Ralink Wireless LAN Setup Wizard prepares to uninstall the driver on your system. Please wait. 3. Click "Yes" to uninstall the Wireless LAN Card driver and utility. 4. Wait for removing the driver and utility.
5. The driver uninstall complete, please click "Finish".
Configuring the Wireless LAN Card Double-click the utility icon configuration. in your system tray to begin the utility Connecting to an existing network 1. Select icon , all available Access Points would be listed. Click on the desired Access Point, and click icon 17 .
2. If you connect to a secured network please type the network security key or passphrase and then click “ ” to connect.
Windows XP SP3 Driver Installation 1. For installing the Wireless LAN Card driver, go to the directory where the Wireless Adapter Installation stored, then double-click the Setup Program to begin the installation. (Exsample: IS_AP_STA_RT2870_D-3.2.9.0_VA-3.2.9.0_W7-3.2.9.0_RU-4.1.7.0_AU-4.1.3. 0_042412_1.5.19.0WP_Free.exe) 2. Ralink Wireless Network Card Setup Wizard will install the driver on your system.
3. Select "Install driver and Ralink WAN Utility" and then click "Next". 4. Click "Ralink Configuration Tool" and then click "Next".
5. Click "Install" to begin the driver installation. 6. The Ralink Wireless LAN driver is installing. Please wait.
7. The installation is now complete. Note: 8. Please click "Finish". If you have installed the Windows XP Service Pack 2. You can use the Windows Zero Configuration Tool for Wireless Configuring. Please refer the Windows XP User’s Guide. When you complete the installation, the utility icon will appear on the system tray ( ). You could double-click it to configure wireless network settings.
Uninstalling the Wireless LAN Card 1. For uninstalling the Wireless LAN Card, please go to: Start All Programs Ralink Wireless under Windows environment. Then click "Uninstall – RT2870".
2. Ralink Wireless LAN Setup Wizard prepares to uninstall the driver on your system. Please wait. 3. Click "Yes" to uninstall the Wireless LAN Card driver and utility. 4. Wait for removing the driver and utility.
5. The driver uninstall complete, please click "Finish".
Configuring the Wireless LAN Card Double-click the utility icon in your system tray to begin the utility configuration. Connecting to an existing network 1. Select icon , all available Access Points would be listed. Click on the desired Access Point, and click icon 2. to connect. If you connect to a secured network please type the network security key or passphrase and then click “ ” to connect.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.