Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the UNIT. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products.
Content Directions ......................................................................................................... 1 Safety Precautions........................................................................................... 3 1 Caring the ALL-IN-ONE PC........................................................................... 4 1-1 LCD Screen ............................................................................................ 4 1-2 Other accessories .....................................
Safety Precautions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. DO NOT press or touch the LCD Screen. DO NOT place the UNIT with small items, they may scratch LCD Screen or enter the UNIT. DO NOT expose the UNIT to dirty or dusty environment. Keep the environment clean and dry. DO NOT place the UNIT on uneven or unstable work surface. DO NOT place or drop objects on the top of the UNIT. DO NOT shove any foreign objects into the UNIT. DO NOT cover the LCD Screen strongly.
1 Caring the ALL-IN-ONE PC The ALL-IN-ONE PC is a precision device; the error operation may damage the device. 1-1 LCD Screen LCD Screen is the most delicate component of the UNIT and comprised of thin glass. It may be broken up by external abrupt force. DO NOT scratch the cover of the UNIT, or the scrape on the cover cannot remove. DO NOT cover the LCD Screen strongly, or else damage may occur.
1-3 If the water comes into the UNIT DO NOT turn on the UNIT immediately. Spill out the water from the UNIT. Use a soft and waterish paper or cloth to wipe the surface of the UNIT lightly. Use the fanner to dry the UNIT and the accessories, and then send it to the service center for advice. DO NOT use hair drier to dry the UNIT, or the high temperature may distort it. DO NOT place the UNIT into the dirty carrying case again.
2-2 Rear Side 1. USB Port (2.0) 2. Microphone Jack 3. Headphone Jack 4. E-SATA Port 5. SD/MMC/MS/MS Pro Card Port The USB card can only be inserted in one orientation. Force to insert the card may in result of damage. 2-3 Back Side 1. Ethernet/LAN Port 2. USB Ports (2.0) 3. HDMI Output Port 4. VGA Port 5.
3 Getting Started Do not connect the power cord until all other connections have been made. Ensure that you observe the color when connecting audio and video cables. 3-1 Connecting Power Supply Connect the power supply cord to AC 100~240V wall outlet, see the figure below: 3-2 Connecting Headphone/Microphone The unit can be connected headphone and microphone. The speaker will turn off automatically after connecting the external headphone to the unit.
3-3 Connecting External Keyboard/Mouse Connect the external keyboard/mouse to the USB port of the unit: 3-4 Connecting USB Device If you want to use the external USB devices, connect the corresponding devices (not included) by the USB port. When you disconnect the external USB devices from the unit, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
3-6 Connecting Network via Wired LAN Before connecting the network with your computer, setup your network system first, and then connect telecommunication line to your unit. 3-7 Connecting External Monitor via VGA Port Follow the figure below to connect external monitor to output signals via VGA cord. 3-8 Connecting External Monitor via HDMI Port Follow the figure below to connect external monitor to output signals via HDMI cord.
3-9 Card Reader Usage The unit has a single built-in memory card reader that can read SD/MMC/MS/MS Pro cards. See the manual of the relevant card for more information. Insert the Memory Card The card only can be inserted in one direction just like the right figure marking. Force to insert the card may in result of damage. Pull out the Memory Card Stop the card’s operation, then pull the card out from the port.
4 BIOS Setup You need to connect an optional keyboard to operate as the prompt indication on the menu to enter the BIOS menu, as below: 1. Click F2 button quickly during loading the system, then the system will enter “Setup Utility” as shown below: 2. Click the left/ right direction keys to select “Boot” and click the Enter button to enter the below menu: Press the ↑↓ buttons to select items and press the Enter button to access change menu.
Click F9 button to setup defaults and select “Yes” to confirm. 4. There is no need to change the startup order and click F12 directly to select the temporary startup option after turning on the unit. The BIOS version will be updated occasionally, potentially changing the interface. Always follow onscreen instructions.
5 Appendix 5-1 Troubleshooting Q1:How to turn off the UNIT when the halted system cannot warm boot? A:Press the POWER button and hold 4 or 6 seconds to turn off the UNIT. Q2:How to check the UNIT if the UNIT cannot be turned on? A: 1. If the power is low, connect to the electric outlets. 2. Check that the video display system is not in the external monitor mode. 3. Make sure the indicator of the adapter turns on and the adapter works well. 4. Remove the U disk, SD card and any other external device.
5. Reinstall the operating system. 6. Send back the UNIT for checking. Q6: If the image isn’t clear A: Check that the lens is clear or not, if not, clean with the soft cloth. Q7: If the mobile moves slowly A: The camera needs some light when gathering the data and the speed will be slow if the light condition isn’t good. Please adjust the screen position of the UNIT or the position of the user.
5-2 Specifications Main Feature CPU (#) Intel® Core™ II i3/i5/i7 series 65W MAX Intel® Smart Cache Different from CPU Memory (#) 8GB MAX Memory Type DDR3 800MHz/1G/1.33G Storage HDD Capacities (#) 1T MAX TFT Screen TFT Screen Size 21.5” Screen Type LCD Touch-Sensitive Screen Description 1920×1080 Built-in Camera Resolution 1.
Adapter AC 100~240V; DC 19V Output Power (maximum) ≤120W Port Standard LAN Type: 10/100Base-T LAN Wireless Card: 802.11 b/g/n Audio/Video Port Headphone Jack, Speaker, Built-in Microphone, Microphone Jack USB Port USB-A Port(x5),USB2.0 E-SATA Port USB 2.0/ E-SATA Combo x1 VGA Port D-15 Output HDMI Port X1 SD Card Port Support SD/MMC/MS/MS Pro Card Physical Features Weight About 6.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.