Instruction Manual

How toUse
1
Plug the mains adaptor provided into a wall socket and connect
the cable provided to the adaptor.
Then plug the Type-C connector into the port on your Duo
Juice®wireless charger. Ensure the power supply is switched on.
Then simply place your wireless charge compatible devices onto
the DuoJuice® and charge. Youcan charge 2 devices at once!
Make sure your device is placed directly over a +. If the
device is not placed correctly on the charger it may not charge.
Remove the device off the charger once fully charged.
* This wireless charger
will charge at its
optimum speed when
used with a 2.1/2.4
amp or Qualcomm wall
adaptor. It is possible
to charge with a 1amp
adaptor or a computer;
but the time to charge
your device will slow
down dramatically.
Charge times may also
vary depending on the
device.
customerservices@juice.co.ukJuice®.10 Haslemere Way.OX16 5RW. UK
Box133,3LombardStreet East,Dublin2,D02HC78,Ireland.Helpline number:+35315256712
Designed in the UK. Product made in China. Design & speci
cation may be subject to change without prior notice.
©Juice. Please retain proof of purchase as this will form part of your warranty, if you do not have proof of purchase for
the product the warranty will be void. If you have purchased the product from a retailer please return the product
directly to the retailer. If you have purchased the product from
juice.co.uk
please contact our customer service team.
Let’s get techy
Input Voltage
Input Port
Output Power
Charger on Standby
Device Charging
DC 12V, 2.5A
Type-C
10W+10W (20W Max)
Green Light
(LED light turns off after 15 seconds)
Blue Light
(LED light turns off after 20 seconds)
*Under abnormal conditions the the green and white lights may flash at the same time.
2
3
4
Average Charge Times

Summary of content (3 pages)