Waterproof Bluetooth USB Rechargeable Water Sport and Swimming Headphones PSWBT7 www.pyleaudio.
READ THIS MANUAL CAREFULLY BEFORE USING THE BLUETOOTH HEADSET. Congratulations on purchasing your new waterproof Bluetooth headset. To ensure optimum performance, please follow these instructions carefully. Before using our product for the first time, carefully read the Safety guide, warranty and operating instructions and follow all safety precautions listed.
sound of another person speaking when sitting opposite you, 1 meter away, then you are listening to the music too loud. Continuous use for many hours at high volumes can cause permanent hearing loss. In general the user must not listen to music at high volumes as this will also cause hearing loss. Listen to earphones at a comfortable level for reasonable periods of time. Hearing experts advise that you should NOT continuously listen to loud and extended play.
• • • • • • • • • • • Built in Rechargeable Battery Unit is Easily Detachable for Charging Unit Charges via USB Port Red LED Charging Indicator Blue LED Fully Charged Indicator Playback Time: Up to 6 hours Standby Time: 20 hours Temperature Range: 32° F- 176° F Dimensions: 1.8’’ D x 2.4’’ W x 0.
2. Go to your mobile phone and turn on the Bluetooth and search for the new Bluetooth device. In the paring mode, the LED will blink red and blue. If not paired for 3 minutes, the Bluetooth headset will power off automatically 3." BT headset" will appear on the Bluetooth list. Press to connect. 4. The LED will flash blue slowly and you can use the Bluetooth headset to call or to listen music instead. 5.
SLIDE OUT PAST THE HEAD FRAME IN THE DIRECTION OPPOSITE OF USB SOCKET) STEP3: Please plug into the USB Bluetooth control center into the computer USB port. Please make sure it is inserted in the correct position and it is not upside down. If it is inserted in the wrong position, the Bluetooth headset will not show up on your computer. It is shown correctly in the picture below. 1: Connect the USB plug the correct way into your computer USB socket or other USB charger. 2.
STEP 6: The Bluetooth headset has been designed to be fully adjustable to fit all heads comfortably. You may notice a "snug" fit the first time you use the Bluetooth headset. This snug fit is important so that the Bluetooth headset will stay in place while performing active sports. However it may be necessary to bend the earphone frame so that they are more comfortable. Do not apply excessive force or over bend the frame as this could permanently damage it. Take your time to get the perfect fit.