PRJWIFI70 HD Pocket Pro Smart Projector with WiFi Multimedia Entertainment Streaming Color and appearance may differ with the icons in this manual ,Product specifications may vary due to the improved performance without notice
Product Features HD Pocket Pro Smart Projector with WiFi Multimedia Entertainment Streaming Model: PRJWiFi70 Features: • Smart & Next-Generation Multi-Functional Projector • Lightweight, Portable, Powerful, Versatile • Full HD 1080p Support • Built-in WiFi Network & Wireless Media Streaming Ability • AirPlay / Miracast: Wirelessly Mirror / Data Transfer (The Pocket Pro Projects Your Smartphone or Tablet's Screen) • Easily Project Your Favorite Images, Videos, Movies & More • HDMI Connector for HDTV, Lapto
Safety Instructions • To ensure the safe use of this projector, please read and become familiar with this manual before use. • Please select the adaptor specified by the company, other adaptors may cause damage to the projector. • Unauthorized disassembling, modification, throwing or dropping of this projector is strictly prohibited. Otherwise this projector might break or become faulty. • Projector must be repaired by professionals only; otherwise it might cause further damage.
Packing List Please unpack the box carefully, and check for the below items.
Summary 9 10 8 7 6 5 4 2 3 1 11 16 12 13 14 15 6 1. Lens 2. Air outlet 3. ON/OFF /Charging Switch 4. Charging Indicator 5. DC 6. USB Interface 7. Micro SD Card 8. HDMI/MHL 9. Touch Key 10. Battery Level Indicator 11. Focus 12. Support Knob 13. Air Inlet 14. Tripod Hole 15. Speaker 16.
Touch Key Source OK/Menu Up/Vol+ Right/Next/Fast Forward Left/Previous/Fast Backward Down/VolReturn Charging Indicator Charging • When charging this device, insert one end of the USB cable to the USB of the projector, the other end to the PC/Laptop/mobile device, power adaptor or original adaptor. • If the device is fully charged, the LED light will shut off. • Please turn the projector off before charging. • Place the switch above in the middle position and it will charge the battery.
Charging for Mobile Devices The internal battery can not only be used for projection, but also can charge your phone. Push the power switch to the right in order to reach the charging mode. Plug one end of the USB cable to the projector; the other end goes into your smartphone. (Note: Power charging for tablet is unavailable) USB 5V 500mA Power Indicator Blue: Full Green: Normal Red: Low Turn the Projector On/Off Push the switch towards the left for 3 seconds to turn the projector On/Off.
Mobile Devices Connect to Projector HDMI Connection • Use the HDMI cable to connect the HDMI output device and projector. The projector will select the source automatically after a few seconds or you can also select the source manually. • Micro SD Card (Max 32GB support) • USB (Max 32GB support) • USB cable charge for mobile devices (Note: USB port does not support mobile hard-drive play) • Headphone Interface • 3.
Select the Source Input Press【 】to change the input channel. There will be a corresponding icon and character for each input source. You can select the desired input from here. Wireless Display Wireless Display If you select Wireless Display, you can connect your smartphone or tablet wirelessly to the projector through a WiFi network.
USB Select the USB input to have the projector play content off of an external hard drive or a flash drive. HDMI Select the HDMI input to have the projector connect to a device with an HDMI output. USB/Micro SD Media Play Press the【 】button on your projector while a video is playing to enter the quick operation menu. Press the【 】【 】button to choose the function you need, and press【 】to confirm. Press 【 】to exit out of the menu. Pause FB FF Prev. Next.
Wireless Display Mode Select (Optional) The following screen will appear when you've selected the Wireless Display Mode. There are two modes under Wireless Display; slide the projector On/Off button towards the left to switch between Miracast and DLNA. Version: 3.0.0-rc3 Name: Projector-XXXXXX Status: LAN: Device : MAC: PORT: Waiting for connection... Projector on/off Push forward to switch between Miracast and DLNA.
Miracast Open the WiFi settings on your smartphone or tablet, locate the projector and select it. After it connects, you will be able to mirror any images or audio through the projector. Version: 3.0.0-rc3 Selected WiFi-Display Mode Name: Status: LAN: Device : MAC: PORT: Default name Projector-XXXXXX Waiting for connection... • There may be a compatibility problem for certain Android versions; make sure that your operating system is up to date and the newest version.
Several Smart Phone Miracast Connection The setting and name of Miracast of smart phone or tablet is different, please refer to its detailed description. Connection Instruction: Samsung Phone 1. Enter the menu of Samsung S3 to find the settings option. 2. Select "More Settings". 3. Select "AllShare Cast" 4. Find "P-XXXX", click on it and wait few seconds. Then, the projection image will mirror the screen of the Samsung S3.
DLNA Under DLNA mode, you may view photos, movies, music that are on your smartphone on your projector via wireless transmission technology. Before using DLNA, the smart device needs to install a software application that support DLNA, such as PPTV, Tencent video, Soho Video, etc. The method for using your iPhone or your Android is basically same. Open the WiFi settings of your smartphone/tablet and find the default name. Connect to it by using the input the password“12345678".
Play Local Video By DLNA To use the app, iMediaShare Lite-v4.02 as an example, open iMediaShare Lite, select "My Videos" and then select“P-XXXXX" to connect to your projector. Projector-XXXX Phone Control Interface Note: Certain software does not support streaming media by using DLNA.
Play Internet Content by using DLNA After successfully connecting to your project, open your browser and input"192.168.49.1". Select , click "Scan", and then select the network you want to connect to. Input the password of the network, connect to the wireless router. After connected successfully, enjoy home entertainment share.
Menu Introduction Click“ ”, display the wireless network selection menu and select the wireless network. Click“ and DLNA. ”to switch between Miracast Click“ ”to show the control buttons. Select control play by video or control by client. Click“ 18 ”to adjust the picture aspect.
Some client software should open the DLNA screen in the "Settings" menu. If the DLNA does not open, there is no DLNA Icon on the control menu of player.
If the transfer process is not smooth or the buffer time is too long, this could be because the distance between the smart device and the wireless router is too great. Sending and receiving data will drop significantly, resulting in slow data transfer. Either replace your router with a high-powered alternative, or place the smart device near your current router. The other reason may be that the bandwidth of router is too small; we suggest you select a wireless router with a bandwith above 150M.
Mirror iPhone/iPad By DLNA 1. Switch to DLNA mode. (If the projector and the mobile phone are under same wifi, please skip the step 2 and 3.) 2. Enter Settings on your iPhone/iPad, select WLAN. Find the default device name "Projector-XXXX", and input password "12345678". 3. To connect your projector with wifi, please check page 37. If there is no wifi here, please skip this step. 4. Slide from the bottom of the screen to enter the control center. Select "Airplay". 5.
Technical Specifications Product Name Native Resolution Display Technology Lamp Projection Size HDMI WiFi Media Player Support Storage Device File System Headphone Output Speaker Power Supply Power Output Battery Projection Mode Charging Mode Power Consumption Working Temperature Working Humidity HD Pocket Projector 854×480 DLP R,G,B LED 37.8''@1m Standard HDMI Input AirPlay DLNA/Miracast* Built-in 1080P media player Micro SD USB 3.
