User Manual

www.PyleUSA.com
PLBNPS18 - PLBNPS11 - PLBNPS12
Subwoofer Box System
Rear Vented Design
with Built-in Illuminating LED Lights
WIRING CONNECTION
Power amplier for schematic diagram.
Connect the power amplier to the positive
and negative terminals accordingly as shown.
REMOTE CONTROL FEATURES
1. Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.
2/9. Dynamic Mode button: Switch from dynamic mode to color mode or
switch between dynamic modes.
3/8. Dynamic Mode Speed button: Use these buttons to adjust dynamic mode
speed. If the unit is in static mode, pressing these buttons will switch unit to
dynamic mode.
4/5. Static Color Adjust button: Use this button to swit h between static colors.
Pressing these keys while in dynamic mode will switch the unit to static mode.
6/7. Brightness Adjust button: Pressing these buttons will adjust brightness
while in static mode. If these buttons are pressed while unit is in dynamic mode,
it will switch to static mode.
10. Demo Mode button: This button will switch the unit into demo mode.
While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.