TROUBLESHOOTING FOREWORD Some corem problems and their solutions are identified in the table below. If you are unable to solve a problem, contact your dealer. Problem No sound;RF light(s) not glowing No sound; R F lights glowing. Received signal is noisy c contains extraneous sounds sounds with transmitter on. Solution Make sure the transmitter POWER switch is ON and the receiver is plugged into a power source Check battery. Check receiver squelch setting. Check receiver antenna connection(s).
TECHNICAL PARAMETERS Unit Specification SYSTEM Operation Frequency range : 170-270.MHz VHF band Frequency stability : 0.005% Modulation : FM Frequency response : 40Hz-18KHz( 3dB) T.H.D : -0.8% Distance : 50-100M Temperture : -10-55 c 1.Please take the following working flow diagram for reference on using this machine-connect the mix out of receiver with mic input on the amplifier or out A,B,C,D and mic input on the amplifier. 2.
FUNCTION DESCRIPTION TECHNICAL PARAMETERS Front Panel Handheld Transmitter 8 ways POWER 1 4 ways CH-A VOL CH-B VOL CH-C VOL CH-D VOL 3 3 3 3 2 1 VHF FOUR CHANNEL MICROPHONE SYSTEM 2 3 CH-E VOL CH-F VOL CH-G VOL CH-H VOL 3 3 3 3 4 4 + 1 - 2 +VOLUME - - 3 1.Power switch 3.
TECHNICAL PARAMETERS TECHNICAL PARAMETERS Wireless meeting microphone Handheld transmitter ¢ This circle light is working, indicating the battery working when the transmitter is switched on. : : : : : : : : : : : : : DC9V <35mA 170-270MHz ¡0.