PBMSPG200V2 Street Blaster X Portable BoomBox Speaker Radio with Bluetooth & NFC Wireless Streaming
Location of Controls 9 10 11 12 13 14 15 16 17 7 8 LIGHT 1 2 18 3 4 5 6 19 20 1. POWER SWITCH 2. DC IN JACK 3. USB PORT 4. AUX IN JACK 5. BATTERY INDICATOR 6. BLUETOOTH INDICATOR 7. GUITAR INPUT JACK 8. MICROPHONE INPUT JACK 9. MODE BUTTON 10. EQ/FD (EQUALIZER/ FOLDER) 11. LIGHT ON/OFF BUTTON 12. 13. 14. 15. VOLUME LEVEL CONTROL 16. ECHO LEVEL CONTROL 17. MICROPHONE INPUT LEVEL CONTROL 18. BATTERY COMPARTMENT 19. NFC AREA 20. ANTENNA 2 www.PyleUSA.
Getting Started Charge the battery Before using the speaker, you must fully charge the battery. When the battery is charging, the BATTERY INDICATOR lights solidly. After the battery has fully charged, the light switches off. 1. Connect the AC adapter to the DC IN JACK of the speaker firmly, and plug it into a wall outlet. 2. When the battery is fully charged, first disconnect the AC adapter from the speaker, then from the wall outlet. Power Source 1. Press the POWER SWITCH to turn ON the speaker. 2.
Pair the speaker manually 1. Verify that the Bluetooth function device is enabled. 2. Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the "P137J". If you are prompted to enter the PIN code, please enter "0000" (four zeros). 3. For more information, see the user manual for Bluetooth device. 4. After successfully pairing, play the music from the Bluetooth device. Note: 1. You can only connect one Bluetooth device to the speaker.
2. After connection, slide your finger on the color wheel or tap the circular icon to change the color. Also, you can swipe the screen from left to right on the lower bar to adjust the brightness. Tap on the power button on the top right corner to turn ON/OFF light. 3. Tap "Music" to play local music on your mobile device- iPhone, device. 4. Tap "USB" to play music on USB drive if the USB drive is pluged in. 5 www.PyleUSA.
5. Tap "FM Set" to FM radio. 6. Tap "Mode" to light effect. Slide your finger upwards/downwards or tap M+/M- to change the color mod. For each color mode, the light effect pulses to music rhythm. Also, you can slide your finger left and right on the lower bar to adjust the light effect speed. Aux IN function 1. When the speaker is in Bluetooth mode, press the MODE button to select the Aux IN mode (F3). 2.
Listening to FM radio 1. When the speaker is in Aux IN mode, press the MODE button to select FM radio (F4) 2. Press / FM SCAN button to search all the FM stations. 3. When it stops searching FM stations, all the FM stations have been found and stored automatically. 4. Press /- or /+ button to explore the found stations (F5). 5. Press the MODE button to store FM stations. Remark: You can also use hplay _light APP to control FM radio. For best FM reception, fully extend the FM antenna.
6. Press and hold EQ/FD button will advance to the next folder (F7). Remark: You can also use hplay _light APP to control USB playback. Connecting a microphone/guitar Using a microphone or a guitar, you can mix its sound with a source sound. CAUTION DO NOT connect a bass guitar to the MICROPHONE / GUITAR INPUT JACK, as it may damage the speaker. 1. Turn the MICROPHONE INPUT LEVEL CONTROL fully counterclockwise. 2. Connect a microphone or a guitar to the MICROPHONE / GUITAR INPUT JACK of the speaker. 3.
PBMSPG200V2 Street Blaster-X Portable BoomBox Speaker Radio with Bluetooth & NFC Wireless Streaming Features: • Made for the Streets: Rugged, Powerful & Portable! • Digital Boombox Stereo Speaker System • Bluetooth Wireless Audio Streaming • NFC (Near Field Communication) Android Support • Built-in LED Party Lights Pulse to the Music • Control the Lights via the Free Downloadable ‘hPlay_Light’ App • High-Powered Portability: Built-in Rechargeable Battery • Full Range Stereo Sound Reproduction, Impressive B
