~~PYLE® PRe) Owner's Manual P2002ABTI www.pyleaudio.
TABLE OF CONTENTS Table of contents F0 rew 0 rd ----- -- - -- -- - -- -- - -- - -- - -- - --- ---- -- - - ---- 1 Featu res -- --- --- - ---- - -- -- - -- --- -- - - --- ---- - -- - ---- 1 Precautions - - -- ---- ---- --- --- --- -- -- - ---- - -- -- -- --- 2 Technical specifications -------------------------- 3 Front panel function ---------------------------- 4 Rear panel function ---------------------------- 5 Remote device function ------------------------ 6 Connecting to amplifier ------------------
1 FOREWORD / FEATURES Forevvord---------------------------------Thank you for purchasing this fine amplifier. Please read this operating instructions carefully before using. It will acquaint you fully with all its features and help you enjoy your time. The product adopts the most advanced digital technique in the world. It is 4 channels with its high power output, so to speak, the real acoustic centre of your family movie theatre.
PRECAUTIONS Precautions 1.Power source-The unit should be connected to a power supply AC-11 O/60Hz, AC-220V/SOHz. 2.Ventilation- The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 1 Ocm away from the walls. 3. Water and moisture-The unit should not be used near water-for example, near a swimming pool in a wet basement, etc. 4.
TECHNICAL SPECIFICATIONS Technical Specifications Technical P2002ABTI Main Channel Power Output PMPO, 8 Ohms ,1KHz test 2000Wx2 THD(1KHz) Normal Load Impedance <1% 8 Ohm Input Sensitivity Impedance DVD/CD AUX 400mV/33k Ohm Microphone 6mV/600 Ohm Signal to Noise Ratio Pure Amplifier 76dB KARAOKE 71dB Frequency Range Frequency Response( 40Hz-15KHz) ± 2dB Tone Characteristic(100Hz-10KHz) ± 14dB Power Requirements Dimension Weight AC-110V/60Hz AC-220V50Hz 19" (w)x13.2" (d)x3.5" (h) 15.
FRONT PANEL FUNCTION Front panel 1 o o o o II 11 li (1) POWER SWITCH Press to switch the power unit ON or OFF. (2) PREV < This knob is used to select the preview station which has been kept in system. (3) NEXT> This knob is used to select the next station which has been kept in system. (4) MENU CONTROL This is used to increment and decrement level forthe selected function of Master Volume , Bass , Treble , Balance , Auto station seek.
REAR PANEL FUNCTION Rear panel (1)TUNER ANT Connect for AM and FM antennas. (2) AUDIO INPUT JACKS Connect the audio output jacks of DVD/CD , to these jacks. (3) REC.LlNE OUTPUT JACKS Connect the RECORD input jacks to these jacks. (4) PRE OUTPUT JACKS Connect the professional input jacks to these jacks. (5) SUB·WOOFER OUTPUT JACKS 1&2 (6) A B (Right)SPEAKER OUTPUT TERMINALS Connect your speaker system to these terminals.
REMOTE DEVICE FUNCTION Remote 4-f----1'--1'- .+-__1-----+28 2+---....-1 +-----+27 3+----1----+ ~~ ~~-~~+26 4+---"--+ 25 5'--~----~~ ~ ~~~ r~~~__-+24 23 6 -+----+22 -4-....--+21 9+-----~~~~~~~~ -+__--+20 10.-----~~~~- 11 +-----__+_ 12.-----~-=~~.:= -~""",---=:"""""---+1 9 -+__--+18 .::,,~~::::;:;;;:=--'-----+ 13 + - - -__1-+- 14~=t=~~~!e 15..- 17 -+----+16 1. AUTO Automatically search the signal source when power on. 2. DIGITAL Tuning am /fm number butto 3\2 7.
CONNECTING TO AMPLIFIER Connecting to amplifier ~~ ~I D ~» »)}» iii Play music via bluetooth ~90° 0 )45 NOTES : Please connect IPOD to the dock from 45° then slowly turn to 90 ° . AM ANTENNA FMANTENNA © ® Speaker A (right) DVD/CD CD Recorder SpeakerB (right) SpeakerB (left) eo.."m, r~1 ~/::0 :':(\)-~-),~----+.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning on the unit. 2. When more than one pair of speakers are used , (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation. 3. To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted. 4.
BLUETOOTH FUNCTION BLUETOOTH FUNCTION 1. Turn on the unit and adjust the volume to a suitable level then select Bluetooth input channel. Pull the Bluetooth antenna out on rear panel of the unit. 2. Active Bluetooth function on your mobile, play the music you want, then press OPTIONS, select PLAY VIA BLUETOOTH, your mobile will search Bluetooth device, after finding the device named "NAO Music", enter password "0000" then your mobile will connect to the device and play music on the unit.
