User Manual

Pyle Home PVC2

Wall Mount Impedance Matching

Vertical Sliding Volume Control

User Manual

www.pyleaudio.com

Thank you for purchasing the Pyle Home PVC2! The PVC2 is a great way to

control the volume of your home speaker system using an already-existing

wall-mounted junction box in your home. This manual contains installation

instructions and a wiring diagram for your convenience. Your product

includes a one year limited warranty from the time of purchase.

Caution: This volume control is limited to a maximum of 50 watts RMS /

100 watts maximum per channel.

Mounting The Volume Control

The volume control is designed to be mounted in a standard electrical wall

box. Select a location that is within reach of the speaker wires and easy to

reach for using the volume control. Warning: You must mount the volume

control in a standard electrical box -- do not mount it directly on a wall.

PAGE 1
Pyle Home PVC2 Wall Mount Impedance Matching Vertical Sliding Volume Control User Manual www.pyleaudio.com Thank you for purchasing the Pyle Home PVC2! The PVC2 is a great way to control the volume of your home speaker system using an already-existing wall-mounted junction box in your home. This manual contains installation instructions and a wiring diagram for your convenience. Your product includes a one year limited warranty from the time of purchase.
PAGE 2
Connections 1.) Run 4-Conductor speaker cable from the amplifier (positive and negative for both the left and right channel) to the volume control marked  and . Similarly, run 2conductor speaker cable from each of the first pair of speakers to the volume control. Label the cables for future reference. 2.) Measure the depth of the volume control to make sure your Volume Control will fit in the j-box. 3.) Connect the speaker cable to the volume control: a.
PAGE 3
Specifications 10 volume positions Control volume from any room Works with all audio & video systems Standard & Decora wallplates included Mounts in-wall Frequency Response: 20 Hz-20 kHz Power Handling: 100 Watts (RMS) / Channel Attenuation: 100 Watts MAX / Channel - 1st position (slider at bottom): Full off - 2nd and 3rd position: attenuate 6 +/- 1 dB per step - 4th through 9th position: attenuate 3 +/- 1 dB per step - 10th position: Full on Insulation Resistance: 100 megaohm @ 500 V D.C.