User's Manual

Table Of Contents

RECEIVER

Frequency: 902~926.75MHz

Frequency Stability：10ppm

Sensitivity: 13dBuV

Adjacent channel rejection：75dB

Image rejection: 95dB

Audio Output：200MV

Output Impedance: XLR connector: 200Ω ; 1 / 4 inch connector: 1kΩ

S/N ratio: 100dB

0.1%

Frequency response: 50Hz-15KHz

: 60m

Power supply: DC12V--18V

Housing: Metal

Size(WxDxH): 16.5”x7”x1.8”

Weight: 3.3 lbs

MICROPHONE

Frequency: 902~926.75MHz

Frequency Stability: 10ppm

Transmitting power: <10mW

Spurious emission: >65dB

Modulation: FM

Max modulation: 75K

Power supply: 3V (2 AA batteries)

Current consumption: 120mA

Total Harmonic Distortion: <

Operating Range

SPECIFICATIONS

PAGE 1
SPECIFICATIONS RECEIVER Frequency: 902~926.75MHz Frequency Stability：10ppm Sensitivity: 13dBuV Adjacent channel rejection：75dB Image rejection: 95dB Audio Output：200MV Output Impedance: XLR connector: 200Ω ; 1 / 4 inch connector: 1kΩ S/N ratio: 100dB Total Harmonic Distortion: <0.1% Frequency response: 50Hz-15KHz Operating Range: 60m Power supply: DC12V--18V Housing: Metal Size(WxDxH): 16.5”x7”x1.8” Weight: 3.3 lbs MICROPHONE Frequency: 902~926.
PAGE 2
RECEIVER FRONT PANEL 1 2 3 45 6 7 8 9 10 11 12 frequency. Then press CH-B UP(10) or DOWN(9) buttons to set receiver CH-B frequency. NOTE: Please must set CH-A and CH-B in different frequencies. 5. Adjust receiver volume(1, 11) and your amplifier or mixer volume to suitable level. HANDHELD MIC 1. CH- A Volume control 2. CH-A channel UP 3. CH-A channel DOWN 4. Infrared (IR) port 5. CH-A Sync Button 6. CH-A display 7. CH-B display 8. CH-B Sync Button 9. CH-B channel DOWN 10. CH-B channel UP 11.