PDWM1902 • PDWM1904 • PDWM3375 • PDWM3378 • PDWM3400 UHF Wireless Microphone System
SYSTEM TYPE • The Vocal Artist-UHF is a hand-held system designed for singers who desire the high quality microphones and the freedom of wireless performance. • The Presenter-UHF is a body-pack system designed for public speakers who prefer an inconspicuous, hands-free lavaliere microphone. • The Headset-UHF is a body-pack system designed for users in physically active applications, who desire the freedom of hand-free microphone. • System Operating frequency range is: 573-597.8 MHz.
DUAL CHANNEL RECEIVER 1. Power Button: Power ON/OFF the receiver. 2. Power Indicator: Indicate the power ON/OFF. 3. Channel Display: Indicates the frequency data of the selected channel group. 4. SET Function Button: Sets channel data. 5. "AF"Audio Level Indicator: Indicate the wireless system audio signal level. 6. "RF" Signal indicator: Glows when the Receiver receive RF signal from Transmitter. 7. Antenna. 8. Volume Knob: Adjust the volume output of receiver. 9.
MICROPHONE FUNCTIONS 1. Grille: Protects the cartridge and help reducing the breath sounds and wind noise. 2. Channel Display: Indicates the frequency data of the selected channel group. 3. Down Function Button: Sets channel data. 4. Up Function Button: Sets channel data. 5. Power and Audio Mute Switch. 6. Battery Cover: Open it to install the battery. TRANSMITTER FUNCTIONS www.PyleUSA.
1. Power and Audio Mute Switch. 2. Antenna: Transmit the RF signal of transmitter. 3. Belt Clip: Attach the transmitter to the belt. 4. Audio Input Jack: It is suitable for lavalier system/headset system. 5. Channel Display: Indicates the frequency data of the selected channel group. 6. Gain Adjusting Volume: Adjust the transmitter audio input gain. 7. State Setting Switch: Set the using state of lavalier system (L) / headset system (H). 8. Up Function Button: Sets channel data. 9.
BODYPACK TRANSMITTER CONNECTION 1. Lavalier Microphone Connection: Connect the connector of supplied Lavalier microphone to the connecting jack of transmitter (Shown as below) Set the transmitter work state in wireless lavaliere system. 2. Headset Microphone Connection: Connect the connector of supplied Headset microphone to the connecting jack of transmitter (Shown as below) Set the transmitter work state in wireless headset system. TRANSMITTER BATTERY INSTALLATION 1.
TROUBLESHOOTING PROBLEM No Sound INDICATOR STATUS SOLUTION Slide transmitter POWER ON/ OFF switch ON position. Make Rod transmitter sure battery Is Inserted properly, observing battery (+/-), If battery is inserted properly, replace with fresh battery. Rod transmitter Slide transmitter MUTE/ON switch ON position. Make sure AC adapter is securely plugged into a electrical outlet and into DC input connector. Red receiver POWER light off Make sure AC electrical outlet works and supplies proper voltage.
UHF WIRELESS MICROPHONE SYSTEM FEATURES AND SPECIFICATIONS PDWM1902 System Features: • UHF Microphone Signal Transmission • Simple Setup & Hassle-Free Operation • Operation Range: Up to 160'+ ft.
PDWM1904 System Features: • UHF Band Microphone System • Simple Setup & Hassle-Free Operation • Operation Range: Up to 160'+ ft.
PDWM3375 System Features: • UHF Band Microphone System • Simple Setup & Hassle-Free Operation • Operation Range: Up to 160'+ ft.
PDWM3378 System Features: • UHF Band Microphone System • Operation Range: Up to 160'+ ft.
PDWM3400 System Features: • UHF Band Microphone Signal System • Operation Range: Up to 160'+ ft.
PDWM1902 PDWM1904 PDWM3375 PDWM3378 PDWM3400 12 www.PyleUSA.
