HD LED PROJECTOR User Manual MODEL: PRJD903 182version:01(Android&2USB)
Warranty card Ⅰ Maintenance record Return Date: Cause of Malfunction: Repair Record: Test Date: Service Station: Signature: Return Date: Cause of Malfuction: Repair Record: Test Date: Service Station: Signature: Return Date: Cause of Malfuction: Repair Record: Test Date: Service Station: Signature: Return Date: Cause of Malfuction: Repair Record: Test Date: Service Station: Signature: Contents Warning ……………………………………………………………1 Safety Precautions…………………………………………………2 Caution …………………………………………………
Warning Warning: Please remember the model and series number of the projector in case of lost. Please carefully check all accessories with the pack list before throwing the package away. When you use this projector, please carefully read user manual. Warning: High brightness lamp! Avoid staring or look directly at the light, specially for children. Warning:Avoid to place the projector in wet condition in case of the electric shock danger.
Safety precautions Warranty clause Warning; 1,warranty range All projector is purchased by our distributor or agent ,we offer the warranty service during valid warranty time. 2,warranty time From the date of production in the projector label, we offer 12 months warranty period for projector. But the halogen lamp only have 6 months warranty; the LED lamp have 24months warranty 3,warranty condition( except for following status) 1)warranty card or purchased invoice are lost.
Packing list &Accessories Caution Please confirm the following after you open the package Packing list: 35 Projector---------------------------1 Lens lid-----------------------------1 Remote control--------------------1 Power cable-------------------------1 AV cable--------------------------1 User manual-----------------------1 Extra fuse------------------------1 Len cleaner-------------------------1 Optional accessories: 1.Projector screen(Matt White,Electric) 2.
Specification Introductions Projector Description LCD Type 5.8"TFT Matrix RGB Input signal video Component video(Ypbpr),VGA,HDMI USB, Audio Stereo Output signal Audio 2W*2 Speaker LCD Native resolution Contrast ratio 1280X800 support 1080P 2000∶1 Lens Aperture Focus 3.8 190mm The projector is able to connect signals: HDMI,Y/Pb/Pr,VGA and TV(optional),as well as stereo audio input.
Instructions FAQ FAQ: Right 1 1 Right channel speaker Left ① Q:Blue screen,no picture,no sound A:Input cables connected right? ② Q:Picture right,no sound A:Input cables connected right? Volume at min.
Trouble shooting Introductions The projector is so easy to use as the TV.While some problems my occur because of the environment and voltage. Please try to recognize the fake malfunction before refer to the technicians Problem 1.when turn on the power switch, the indicator light do not work 2.
Installation Projector Installation Please install in reference to the instruction below Speaker L Subwoofer Speaker R Screen Speaker C Projector DVD Amplifier Appreciate seats Speaker LS Speaker RS In order to get a good image quality, do not expose the projector to the sunshine or other strong light, close the curtain if you use the projector in daytime Page 7 P age 20
Menu setting Projector Installation 6.Menu setting method OSD language English Restore factory default HDMI CEC Blending OSD duration Software update(USB) setting Standard setting(Front projection) Please refer to the below sheet, install the projector in distance according to the screen size.
Projector Installation Menu Setting 3.
Menu Setting Input terminals Signal terminals description 1. Menu setting method 1. Using the projector,press“menu”. The picture display on screen to adjust menu(picture I) 2. Press“◀/▶”key,the menu in turn circle into“picture”>“sound” >“time”>“system” 3. Select the adjust interface,use“▲/▼” key to choose the wanted item (picture II) 4. Press“OK”or“◀/▶”to adjust the item parameter. 5. Finished the elected item parameter, press the “menu”key again, exit the page 6.
Image adjustment When you use the projector for the first time .It normally will appear image faintness or the image is trapezoid. This is caused by the wrong lens focus or trapezoid correction Please follow the below steps to correct: Focus adjustment 1、Rotate the lens into projector, the rotate it out slowly.At the same time, looking at the resolution point carefully.
Turn on/shut down If the projector is a new one, please read the “projector install chapter, place the projector and connect the cables,follow the below steps to turn on/off Remote control Remote control instruction Manual channel search Channel Edit Multimedia Mode Turn on Red 【Sub Menu】→【Delete】 1.Put in two 7-size battery in the remote control before using Save Delete Green Rename Yellow 【Confirm】Delete Move Bl u e Skip 2.
Panel instruction 1 M 2 3 4 4 6 4 4 SOU 5 1 Indicator light Red: Standby mode 2 Green: Working mode 3 Menu 4 Direction key Adjust with parameters, the same function with the remote control 6 OK KEY open or close the Menu 5 Page 13 SOU-KEY Source key (VGA,HDMI,etc.