PDWM4300 PDWM4300 VHF WIRELESS SYSTEM VHF WIRELESS SYSTEM OPERATION MANUAL OPERATION MANUAL
VHF WIRELESS SYSTEM OPERATION MANUAL Thank you for buying the PDWM4300 Wireless System. Please read through these operation instructions so you will know how to operate your model properly. After you read it, put it away in a safe place for future reference. Avoid exposure of the system to rain or moisture. No user-serviceable parts inside the system. Refer all servicing to a qualified technician only. Handle the wireless system carefully, dropping or other shocks may cause failure.
B. Receiver Sensitivity: Image Rejection: Stability: Audio output: Power supply: Dimensions(m/m): 6dB V at S/N>90dB >60dB >80dB -12db/600ohms unbalanced and balanced 15VDC/0.5A 16.5 8.2 1.8 inch PDWM4300 VHF PROFESSIONAL FOUR CHANNELS WIRELESS MICROPHONE SYSTEM VOLUME VOLUME RF CHANNEL 1 C.
The on air indicator does not light up The wireless microphone is not turned on. The microphone receiver is not turned on. Turn on the microphone receiver and the connected audio equipment The microphone receiver is not connected properly. Turn on the microphone receiver and the connected audio equipment The battery in the wireless microphone is weak. No sound The sound is distorted 1.
Using the supplied audio cable, connect from the MIXED jack socket to the "MIC IN" / "LINE IN" socket on amplifier. Alternatively, you can connect an optional XLR cable from the "XLR MIXED" socket on the receiver to a professional mixer. Connect the mains power adaptor from "DC 15V" jack to a suitable mains power socket. BELT CLIP BATTERY COVER AUDIO OUTPUT JACK LOW BAT ON MUTE MIC/LINE MIC LINE MIC LINE MIC LINE MIC LINE POWER SWITCH AUDIO SWITCH Installation Location: At least 3 ft.
REAR PANEL FRONT PANEL 3 3 4 1 5 6 7 8 9 10 11 DC IN 15V/500mA PDWM4300 VHF PROFESSIONAL FOUR CHANNELS WIRELESS MICROPHONE SYSTEM VOLUME VOLUME RF VOLUME RF AF LEVEL CHANNEL 1 XLR MIXED VOLUME RF AF LEVEL CHANNEL 2 RF AF LEVEL CHANNEL 3 MIXED CH-1 18 19 SQ4 17 POWER 16 2 12 1. Power Indicator 2. Power Switch 3. Antenna 4. CH-1 RF Signal Indicator 5. CH-1 AF Indicator 6. CH-2 RF Signal Indicator 13 7. CH-2 AF Indicator 8. CH-3 RF Signal Indicator 9. CH-3 AF Indicator 10.