User manual
Foreword Safety warning: To avoid the risk of fire, electric shock, and personal injury, follow these basic safety precautions when using this computer, including the following: 1. Read these instructions carefully before using the computer; 2. Place the computer on a stable surface before setting it up; 3. Keep the computer away from high temperatures, humidity and dust; 4. Do not hit or drop the computer to avoid damage; 5.
---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. RF Exposure The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.
Chapter 1 Know Your Computer 1.1 Packing List When receiving the mini pc, please open the package and carefully remove the product. If there is any omission or damage, please contact the supplier immediately. 1.2 Interface Description 1.2.1 front view 1 USB 3.0 to connect USB devices, such as: USB flash drive, USB mouse, etc. 2 USB 2.0 to connect USB devices, such as: USB flash drive, USB mouse, etc. 3 Headphone jack Connect 3.
1.2.2 Behind view 6 Power connector Connect the power adapter 7 RJ45 port Connect the computer to the Ethernet network through the network cable 8 USB 3.0 port to connect USB devices, such as: USB flash drive, USB mouse, etc. 9 HDMI port HDMI 2.0, external HDMI display, support 4K output 10 DP port External DP display,support 4K output 11 Type-C port 1. Connect USB device 2. Display output (this function is optional, hardware support required) Chapter 2 Know the Bios 2.
Advanced menu:The following advanced settings can be made, SATA mode selection: The hard disk working mode can be set.
Administrator password Set the password to enter the Setup menu User password Set the password to enter the Setup menu and machine startup HDD Security Configuration Set the hard disk protection password Secure Boot Secure Boot switch control sub-menu, this item should be Enabled when installing Windows 10 UEFI mode. When installing Legacy (non UEFI) system, such as DOS, Windows 8, this item should be Disabled, otherwise the system cannot be installed or booted.
Chapter 3 Simple Troubleshooting No. Fault phenomenon Troubleshooting 1 Can not turn on 1. Make sure that the AC adapter is connected to the computer and that the power cord is plugged into a working electrical outlet; 2. The computer is turned on (press the power button again to confirm whether it is turned on normally); 3. If the above items are set correctly, the computer still does not turn on, please contact the supplier in time. 2 When the computer is turned on, the screen is not displayed 1.