PURETEK INDUSTRIAL CO.
FCC Part 15 Operation is subject to the following two conditions: 1.This device may not cause harmful interference. 2.This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
. The Setup program will detect your Dungle and your Windows’s language then display the following dialog: 4. If the dialog displays the right path and language that you want to install, please press YES. Otherwise, you may install the language you want, please reference the previous chapter for detailed information. 5. We recommend you to install “Multi-Cam Surveillance System” in the local PC, which connect to the video camera. “MultiCam Remote View” should be installed in another PC.
System RAM: 64MB, 128MB is recommend. Display card: 16-bit high color or 24-bit true color. Monitor: 17 inch. Display Resolution: 1024 by 768 for 6Port/800*600 for 4Port Video Frame Size : Up to 320 *240 (Per camera) Network card. (optional) Modem and Telephone line.
Main Panel Add/Remove Camera There are individual windows display in the MultiCam Surveillance System, you can press the "x" icon to remove or use manual bar Camera function->Readd Camera. We recommend removing the camera window if there is no actually connected to the video camera. Hide Camera You can use the "-" icon to hide the camera, it is still functional but will not display the field of vision. Storage/Time left display Display the currently available free disk space for recording video clips.
Lock Camera (Zoom in/Zoom out) You can select any one of the camera to Zoom in or Zoom out, just press the icon between "-" and "x" or press the function key F1 to F6, F1 represent to camera 1. You can press the tool bar icon to zoom in or zoom out, or use the numeric keypad "-", "+". You can press the ESC key to back to the default display status.