Table of Contents Chapter 1 Introduction Features System Requirements 2 Package Checklist 2 Chapter 2 Installations Hardware Installation Installation Procedures for Win 98 oie 4 Communication Software Installation & Chapter 3 Commands Typing COMMANDS pence 7 AT Commands...
Voice « Voice/Audio mode » Full-Duplex speakerphone System Requirements = Windows™ 95, Windows™ 98, Windows™ NT 4.0 = 150MHz MMX CPU or higher = 16MB RAM Note Please make sure your CPU Is running at 150MHz NETS (minimum) and at the same time supports MMX, Package Checklist The package contains the following items: » One fax modem « One piece of phone cable « One CD The fax modern user's manual If any of these items are missing or damaged, please contact your dealer or sales representative for assistance.
a _ Chapter 2 “a Installation Procedures for Windows™ 98 1. Once you have completed the hardware installation, power on your computer. When running Win 98, your system will detect a new device and the following message will appear. Click Next. 2.
“oog Chapter 3 — _Crater [Tg S-Register can be selected by using the Tans command. Dial MDT digits 0 to 9 Pulse (rotary) dial Tone dial Wait for second dial tone (X3 or higher); linked to 56 register. Toggles calling tone enable/disable.
Chapter 3 12 $-Register Definitions S10 Number of Rings to Auto-Answer The nurturer of rings the modem waits for before it auto answers, Range: 0-255 (rings) Default: 0 Wait Time before Blind Dialing The time to pause after off-hook before blind dialing. Range. 2-255 (U.S) Default: 2 (Country dependent) Waiting Time before Carrier Detect The time to wait for a carrier from the remote modem before hanging up.
13 Chapter 3 Range: 1-255 Default: 14 {1.4 seconds) $11 MDT Tone Duration The time for MDT tore dialing and the time between the tore spacing. Range: 50-255 Default: 95 (0.
1 Lees Flexible Flexible | 56060, 54000, 52000, 48000, 46000, 44000, 42000, 38000, 36000,340C0, 32000 B103 Bell 103 | 300 B212 Sell 212 | 1200 automotive = Option Selected 0 Auto mode disabled 1 Auto mode enabled i Far example: @ Where: REFLEXIVE 1 300 $6000 select FLEXING auto mode enable terminate data speed 300 bps maturate data speed 56000 bps if you want to select V.
<= HEN IEE 3 a Chapter Set Guise Dial (for phone fine that does not support touch-tone dialing) Sr=n Set register rto n Sn? Display contents of 5-Register n vn Result Code Form vo Numeric codes v1 Verbal codes Zn Soft Reset and Restore Profile 20 Restore stored profile 0 after warm reset. Fal Restore stored profile 1 after warm reset. &Cn Control Carrier Detect (CD) signal &C0 CD override &C1 Normal CD operations &Dn DTR Option &DO Ignore an on-to-off transition of OTR.
| TET | Chapter 3 ; (Cheer? Commands Most people use the communication software programs to tell modems what to do. Therefore, you may not use the commands in this chapter. However, if you prefer to communicate with your modem directly, you can type the commands described below. This chapter describes how to work in the terminal mode. Note The CD bundled in your fax modem package contains details on AT commands (file path: PDF). Typing Commands * Use the BACKSPACE key to delete typing errors.
i 3. Place the CD containing driver for Win 9X into your CD ROM drive. Specify the location of the modem driver, e.g, EAROCKWELLPCIMODEMACE_COUNTRYAWINGS {select the appropriate country). Click Next. COUNTRYMEN stands for all the countries included in Pan-European Approval, i.e., Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Norway, Portugal, Spain, Switzerland, Holland, Sweden and UK.
Installations This chapter describes how to install and power on you fax modern. Hardware Installation 1. Make sure that your computer is switched off. Unplug the power cord from the wall socket. Also turn off alt other peripherals you may have attached to your computer. 2. Select a free PC slot. Remove the cover from the slot, Keep the screw. You will be using it in the next step. 3. Carefully slide the internal modem into the chosen slot. Press firmly on the top of the modem to seat it.
8 Chapter 1 Introduction The Voice/Fax/Data PCI Modem connects your computer to Internet, all kinds of BBS, and other fax modems. This manual describes the features, installation procedures and AT commands. EN | Phone: Phone jack. al Line: Telephone line jack. MIC: Microphone jack. me SPK: Speaker (for Stereo only) "tol jack Lr Features 2 This mode supports the following communication standards. IT-T is known as CIT. Data {7-T V.90 and Rockwell Flexible IT-T V.32, V.320bis, V.32, V.22bis, V.21, V.
BIT FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.