D2 Mio with Bluetooth Evoke_D2_Bluetooth_Mio_UKAus.
Pure Warranty Statement for Australia This statement replaces any reference to warranty which may be contained elsewhere within this manual. What do you need to do now? Option 1: You can register your purchase on-line at https://www.pure.com/au/register/register.asp Option 2: Or you can do nothing other than keep your proof of purchase as evidence of your purchase date. This proof of purchase would need to be presented if warranty service was ever required.
Evoke D2 Mio with Bluetooth Thank you for choosing Evoke D2 Mio with Bluetooth. This manual will help you get your product up and running in no time and explains how to get the best out of all its great features. If you need any further assistance, please visit the support pages on our website at support.pure.com. 1 Evoke_D2_Bluetooth_Mio_UKAus.
Safety information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. R ead these instructions. K eep these instructions. H eed all warnings. F ollow all instructions. K eep the unit away from heat sources such as radiators, heaters or other appliances that produce heat. D o not expose the unit to direct sunlight. D o not use the unit near water. A void objects or liquids getting into the unit. D o not remove screws from or open the unit casing.
Contents 4 Introduction 4 4 5 Front panel controls Display Rear panel 6 Getting started 6 Quick set up 7 Using your Evoke 7 7 7 Selecting digital radio Selecting FM radio Pausing and controlling scrolling text 8 Storing and selecting presets 8 To quick-store a station to a preset button (1–3) To store a station to the preset list (1–10) To recall a preset when listening to digital radio or FM radio 8 8 9 Using Bluetooth 9 Preparing Evoke to stream audio using Bluetooth 10 Setting the al
Introduction Front panel controls 1. 2. 3. 4. 5. 6. 7. 8. Standby: On/standby switch (mains powered) or on/ off switch (ChargePAK powered). Source: Press to switch between Digital radio, FM radio, Auxiliary input and Bluetooth. Menu: Press to access setup options. Volume: Turn to adjust volume. Push to mute and un‑mute. Select: Turn and press to browse and select radio stations, select and adjust menu options or pause and control scrolling text (see page 7).
Rear panel You will need to remove the rear cover to see the ChargePAK compatment on the rear panel of Evoke (see page 18 for more information). 1. 5.5V DC input connection for supplied mains adapter. 2. 3.5mm stereo headphone socket. 3. 3.5mm auxiliary input connection for an iPod, MP3 player, etc. 4. Mini-B type USB connector for USB software updates. 5. Compartment for ChargePAK B1 rechargeable battery (sold separately). 6. Telescopic antenna. 5 Evoke_D2_Bluetooth_Mio_UKAus.
Getting started Quick set up Note: If you have a ChargePAK B1 rechargeable battery (sold separately) fit it now before plugging Evoke in. See page 17 for more information. 1 • Unclip the aerial and fully extend it (steps A and B). • Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C). • Plug the mains adapter into the mains supply (D) and press the Standby ( ) button. B B D D A A D 5.5V DC 5.5V DC 5.5V DC 5.5V DC C C C 2 Select your language when prompted.
Using your Evoke PM DR DR Selecting digital radio PM BBC Radio 2 the latest news BBC Radio 2 the latest news DR Press Source to switch to digital radio. Changing digital stations PM 1. Turn the Select dial to the station you want to listen to. Station list BBC 6Music 2. Push the Select dial to tune into the station. Selecting FM radio PM DRFM DRFM PM 87.50MHz 87.50MHz DRFM Turn and release the Select dial right or left to seek to the next or previous FM radio station that has a strong signal.
Storing and selecting presets Store up to 10 digital and 10 FM radio stations for quick access. DR PM BBC Radio 2 the latest news DR PM Preset 3 stored DR PM Preset 2: (Empty) To quick-store a station to a preset button (1–3) Tune to the digital or FM radio station you want to store. Press and hold one of the numbered preset buttons (1–3) for two seconds to save the current station as a preset. You can save over existing presets. To store a station to the preset list (1–10) 1.
Using Bluetooth If your phone or tablet is capable of storing audio files, you can use Bluetooth to stream any music stored on your phone or tablet to Evoke. Note: Adding a Bluetooth device varies on different mobile devices. See your mobile device manual for specific information. Preparing Evoke to stream audio using Bluetooth 1. Enable Bluetooth on your mobile device. 2. On your mobile device, select the option to add a new Bluetooth device.
Setting the alarm and sleep timer The alarm in Evoke switches the radio on (if in standby) and tunes to a digital or FM radio station or sounds a tone. Note: The alarm function does not work when Evoke is being powered by the ChargePAK B1. Setting the alarm PM DRFM FM Alarm 1. Press Menu. 2. Turn and press the Select dial to choose ‘Alarm’. 3. Turn and press the Select dial to choose ‘On’. PM DR Alarm setup Off PM DR Alarm time 07:00 DRFM PM 7.
Cancelling a sounding alarm To cancel a sounding tone alarm, press either the 3, 4+, Menu or Source button, or push the Select dial. Note: If you have set up your alarm to tune into a radio station, you can only cancel the alarm by pressing the Standby ( ) button. Snoozing a sounding alarm To snooze a sounding alarm, press either the preset number 1 or preset number 2 button. Disabling an alarm 1. 2. 3. 4. Press Menu. Turn and press the Select dial to choose ‘Alarm’.
Options and settings General settings Changing the language 1. 2. 3. 4. Press Menu. Turn and press the Select dial to choose ‘Settings’. Turn and press the Select dial to choose ‘Language’. Turn and press the Select dial to select a menu language from ‘English’, ‘French’, ‘German’, ‘Italian’ or ’Spanish’. Factory reset Resetting your Evoke removes all presets, stored stations, alarms and resets all other options to default settings. 1. Press Menu. 2. Turn and press the Select dial to ‘Settings’. 3.
Digital radio settings Autotune You can use the autotune function to automatically scan for new digital radio stations and remove inactive ones. Note: Autotune is only available when you have selected ‘Digital’ as the radio source. To carry out an autotune: 1. Press Menu. 2. Turn and press the Select dial to choose ‘Autotune’. The number of stations found will be displayed during the autotune. When the autotune has finished, Evoke will tune to the last station that you were listening to.
Display settings Changing the backlight brightness level 1. 2. 3. 4. 5. Press Menu and turn and press the Select dial to choose ‘Display’. Turn and press the Select dial to choose ‘Backlight’. Turn and press the Select dial to adjust the brightness level when Evoke’s display is ‘Active‘ or in ‘Standby’. Turn and press the Select dial to select ‘Level’. Turn and press the Select dial to set a brightness level between ‘1’ (dim) and ‘5’ (bright). Changing the duration that the backlight is illuminated 1.
Clock settings Setting the time and date The time and date on Evoke are automatically set by the FM or digital radio signal. If the time/date does not update automatically, you can manually set it using this option. Note: Any time or date updates received by an FM or a digital broadcast will override manual settings, if clock synchronization is enabled (see the following page for more information). Setting the time and date manually 1. 2. 3. 4.
Appendix Help and advice I can’t see Evoke in the list of available Bluetooth devices on my mobile device This may be because your Evoke Bluetooth visibility setting is set to ‘Off’. To make Evoke visible on your mobile device, change Evoke’s Bluetooth visibility setting to ‘On’ (see page 12). My mobile device is prompting me for a passcode when I try to pair with Evoke Some legacy Bluetooth devices may prompt you to enter a passcode when trying to pair with Evoke. If this occurs, enter the code ‘0000’.
Installing the ChargePAK B1 ChargePAK B1 ChargePAK B1 Note: Switch Evoke off and disconnect from the mains power supply before installing ChargePAK B1. 5.5V DC Note: If you are charging ChargePAK for the first time or after an extended period of inactivity it is recommended that it is charged for around 24 hours to ensure full battery power. If ChargePAK is flat there may be a slight delay before the battery charging indicator is displayed. 17 Evoke_D2_Bluetooth_Mio_UKAus.
Changing Evoke’s removable covers Note: Switch Evoke off and disconnect from the mains power supply before changing the removable covers. 5.5V DC 18 Evoke_D2_Bluetooth_Mio_UKAus.
Warranty information Imagination Technologies Limited warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of three years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us.
20 Evoke_D2_Bluetooth_Mio_UKAus.
Pure UK Headquarters Imagination Technologies Limited Home Park Estate Kings Langley Herts, WD4 8LZ United Kingdom www.pure.com http://support.pure.com Evoke_D2_Bluetooth_Mio_UKAus.indb 21 Pure Australasia Pty Ltd PO Box 5049 Wonga Park Victoria 3115 Australia sales.au@pure.com http://support.pure.
www.pure.com connect.pure.com www.facebook.com/pure 105OA Evoke_D2_Bluetooth_Mio_UKAus.