DUAL ROCKER KIDS SEESAW MODEL# 9338DRS PRODUCT MANUAL - VERSION 5.20.01 FOR AGES: WEIGHT LIMIT: 3-7 Lbs 75 Lbs Per Seat TO BUILD: 150 X TOOLS NEEDED: 1 Manual en español ubicado en GQBrands.com Spanish Manual located at GQBrands.com CUSTOMER SERVICE GQBrands.com • CustomerService@GQBrands.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: DUAL ROCKER KIDS SEESAW MODEL# 9338DRS To register you product please visit: www.globalqualitybrands.com/product-registration or Scan code If you have an issue with your item, do not return. Please report items that are damaged or missing parts to the manufacturer GQ Brands within three days of delivery. Contact customer service at customerservice@gqbrands.com to open a ticket.
WARNINGS ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. Please read these warnings and the information in this manual in its entirety. Failure to comply with the following instructions may increase the risk of serious injury and/or death: • This unit must be assembled and disassembled by ADULTS ONLY. • DO NOT allow children to stand on the seesaw. • This See Saw is suitable for use by most children 3 TO 7 YEARS OF AGE.
PARTS LIST 1 - Base Rail 2- Base Bar x2 x2 3 - Handle Bar 4 - Arm A x2 x2 6 - Seat/Back Rest 5 - Foot Rest x2 x4 4 GQBrands.com CustomerService@GQBrands.
PARTS LIST 7 - Arm B 8 - Side Rail x2 x2 9- Seat Rails 10- M6x40mm Bolt x16 11 - M6 Washer x20 x4 12 - M6 Nut 13 - M6x50mm Bolt x20 14 - M6x35mm Bolt x16 18 - Allen Wrench MODEL# 9338DRS 15 - Square Nuts x16 16- M6x15mm Bolt x8 x4 17- Safety Caps x20 19 - Service Wrench 5
ASSEMBLY INSTRUCTIONS STEP 1 Parts: Part 1 (x2) - Base Rail Part 2 (x2) - Base Bar Part 4 (x2) - Arm A Part 7 (x2) - Arm B Part 10 (x4) - M6x40mm Bolt Part 11 (x4) - M6 Washer Part 12 (x4) - M6 Nut 7 1 10 4 Attach both Base Rails and Base Bars to create the bottom frame of the seesaw. 12 11 11 12 2 4 10 2 11 12 7 11 10 12 Install both Arm A & Arm B from the outside of the frame using the hardware provided. Repeat this step in both sides of the frame.
ASSEMBLY INSTRUCTIONS STEP 3 Parts: Part 3 (x2) - Handle Bars Part 10 (x4) - M6x40mm Bolt Part 11 (x8) - M6 Washer Part 12 (x8) - M6 Nut Part 13 (x4) - M6x50mm Bolt 3 8 Slide the Handle Bars (Part 3) in the middle of the frame and install using the hardware provided. 13 12 11 12 13 12 11 13 11 10 12 12 11 11 12 13 10 11 12 Align to the bottom of the frame and the middle of the side rails until snug.
ASSEMBLY INSTRUCTIONS STEP 5: Parts: Part 5 (x2) - Foot Rest Part 10 (x4) - M6x40mm Bolt Part 11 (x4) - M6 Washer Part 12 (x4) - M6 Nut Align the Foot Rest (Part 5) with the hooks facing away from the seats to the openings of the handle bars (Part 3). Install using the hardware provided. NOTE: Make sure to install the bolts from the outside, with washer and nuts on the inside of the frame to avoid injury. 5 3 10 Before preceding to step 6, make sure all hardware and bolts are securely tightened.
ASSEMBLY INSTRUCTIONS STEP 7: Parts: Part 17 (x20) - Safety Caps Install all Safety Caps to all Bolts installed in the product. NOTE: Failure to install safety caps can result in severe injury. Do not remove. If a safety cap is missing/broken, do not use product until covered completely.
FREQUENTLY ASKED QUESTIONS Question: “How should I clean my seesaw?” Answer: you should clean the Seesaw with a solution of warm water and Non- Corrosive/Abrasive soap. Dampen a rag with this solution and wipe completely dry before using. Question: “A seat seems loose, what should I do?” Answer: Make sure the Bolts/Nuts under the plastic seat are secure. Question: “Something was missing from the packaging,” “I need to purchase a replacement part” or “I discovered a damaged piece.