V090911 TABLE OF CONTENTS Introduction/Customer Service Information ………………..…. 3 Warranty Information ……………………………………………….……..4 Warnings/Safety Precautions…….………………………………….5-7 Parts List/Hardware……….……………………..……………………….8 Assembly Instructions………………………..……………………..…9-16 Maintenance/Safe Play Tips……………………….…………………17 Frequently Asked Questions………………………………………..
OWNERS MANUAL CUSTOMER SERVICE INFORMATION Thank you for purchasing our Pure Fun™ 36” Kids’ Mini Trampoline with Handrail. At Pure Global Brands, we want all of our customers to be completely satisfied with their purchase. Please take time to review the contents of the product you have just received to make sure that all of the parts are included. If you find that any parts are missing or damaged, we will happily provide replacement parts at no charge within 30 days of purchase.
LIMITED WARRANTY Limited Warranty Pure Global Brands warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 90 DAYS FROM THE DATE OF ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only for the original purchaser of the Product. All warranty coverage extends only to the original retail purchaser from the date of purchase.
D A E R F S I TH ! ! ! T IRS WARNING CHOKING HAZARD – Small parts NOT for children under 3 years. Warning While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risks of injury due to use. All merchandise is sold on this condition, which no representative of the company can waive or change.
OWNER’S MANUAL PRECAUTIONS/SAFETY INSTRUCTIONS/WARNINGS Dear Customer, Please read this instruction very carefully before using this item. You will find important information regarding safety and your product. IMPORTANT SAFETY INSTRUCTIONS Please read the instructions entirely before use and retain for future reference. This unit must be assembled and disassembled by ADULTS ONLY. Children must be supervised at all times when using this equipment.
Please read and refer to other warnings and use information in the trampoline instructions before use. Please read and refer to other warnings and use information in the Safe Play Tips before use. The trampoline handle is only intended to assist your child with controlling their bounce and maintaining their balance on the mat. The handle should NOT be used for any other purpose or as climbing feature. Dispose of all packaging materials safely and per local ordinance.
Please read the following instructions prior to assembly PARTS LIST PRIOR TO ASSEMBLING Please refer to the table for part descriptions and numbers. The assembly instructions use these descriptions and the Key numbers as reference. Make sure you have all parts listed. If you are missing any parts, please contact customer service.
Step 1. A. Connect 3x (Part 1) Top Rail Frame pieces to make the trampoline frame. Make sure that the metal push tabs are secure in each connection on the frame before proceeding. B. To connect the 3rd and final section of the Top Rail Frame, push down on the last joint until the metal tab is fully inserted and snaps into place. See Diagram below for clarification.
Step 2. Diagram 1 Diagram 2 Thread the end of the Bungee Cord through the pre-made loop (pictured in Diagram 1), as shown in Diagram 2. Step 3. Diagram 3 Diagram 4 A. Center the Trampoline Mat within the completed frame (Diagram 3). * *TO ASSIST IN CENTERING THE TRAMPOLINE MAT, THERE ARE 4 ZIP TIES INCLUDED. To use, thread 1 zip tie at each “compass point” (N,S,E,W) through the fabric loops.
A. Continue to thread the Bungee Cord through the fabric loops, wrapping it once around the Top Rail Frame sections after each fabric loop as you work your way around the trampoline frame. B. Keep the Trampoline Mat centered within the frame. Periodically check to make sure that it is not pulling too much to one side (especially where you first started threading the cord.) C. Leave a small amount of slack, and do not pull the cord too tightly as you progress to the Bungee Cord’s end. D.
BE CAREFUL OF PINCH POINTS AT THE AREAS WHERE THE CORD CONTACTS THE FRAME WHEN PERFORMING THIS STEP. PINCH POINTS A. In order to join the two ends of the Bungee Cord while keeping the mat centered, you should create the necessary slack in the cord by pulling it as taut as possible from the last 4 or 5 wraps you made around the trampoline frame first, and then from the pre-made loop end of the cord last. B.
Step 6. Diagram 1 Diagram 2 A. Slide the Bungee Cord Ball into the Bungee Cord (Diagram 1). B. Pull on the cord and hold the tension so that you can tie off a knot on the end to prevent the ball from slipping, as shown in Diagram 2. Make sure the knot is secure. C. Creating slack on the pre-made loop end of the cord, open the loop enough to fit the ball through the loop. D. Make sure the loop is snug against the ball, so it will not slip during use.
Your completed mat, cord and frame assembly should look like the picture below. Step 7. As shown in the pictures above, attach the Trampoline Pad by fitting the precut holes in the pad over the Leg Housings. Step 8.
Diagram 1 Diagram 2 NO LEG NO LEG A. Following the pattern shown in Diagram 2, insert 4x Legs into the Leg Housings, making sure the metal push buttons snap securely into the holes into each Leg Housing. Diagram 3 Diagram 4 B. As shown in diagram 3, take the remaining 2x Legs, and place 1x Handle Base over each Leg. C. Take the Leg/Handle Base assembly, and place it onto the Leg Housing. D.
A. Attach the Center Handle bar to one Handle Base, securing it with the push button on the Handle base. B. Slide the other end of the Center Handle Bar onto the remaining Handle Base until it snaps securely into place. Peel the foam back slightly on the Center Handle Bar once it is in place to make sure the push buttons are correctly aligned through the holes.
Your mini trampoline is designed to be very low maintenance. If any part of the trampoline requires cleaning, simply wipe with a damp cloth. (Do not jump on the trampoline after cleaning until completely dry) If the paint is chipped, we recommend you lightly rub the damaged area and cover using a non-toxic enamel paint. IMPORTANT: While no regular maintenance is required, you must inspect the trampoline before each use and replace any worn, defective, or missing parts.
Question: “The bungee cord has snapped/become frayed, why did this happen? “ Answer: MAKE SURE THAT THE MAT WAS INSTALLED PROPERLY AND IS CENTERED WITHIN THE FRAME. AN INCORRECTLY INSTALLED MAT WILL PUT EXCESS TENSION ON CERTAIN AREAS OF THE BUNGEE CORD. ALSO MAKE SURE THAT YOU ARE FOLLOWING THE 75 LB. WEIGHT LIMIT ON THIS TRAMPOLINE, SPECIFICALLY MAKING SURE THAT ONLY ONE CHILD IS ON THE TRAMPOLINE AT A TIME. YOU CAN ALSO PURCHASE REPLACEMENT BUNGEE CORDS AT: www.pureglobalbrands.