PMW 1212 User’s Manual
Before using your new Speaker Box with amplifier, please read this instruction manual to prevent any damage. Put it away in a safe place for future references. INSTRUCTIONS Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the contrary the system Could damage 1.- Plug the polarized cable to electric power and to the speaker 2.- Plug the Microphone on the “MIC” input with a 6.3 connector Or Canon 3.
Caution Do not close the microphone to the speaker, it can cause feedback echo and it damage the system CONTROLS 1. SD Port 2. USB Port 3. MIC1/LINE1 LEVEL MIC1/LINE1 signals (unbalanced signal) input and signal level control 4. MIC2 (GUTAR) /LINE2 LEVEL MIC2 (GUTAR)/ LINE2 signals (unbalanced signal) input and a signal level control. 5. LINE IN (Unbalanced signal) the RCA line input and MP3 signal input of the conversion 6. LINE OUT (The imbalance signal) RCA line output. 7.
USB / SD / FM / BULETOOTH player control keys. A. Play / Pause: a. short press for Play / Pause function b. Hold for 3 seconds to enter the folder mode, radio working condition c. FM, Scan function automatically search for channels and automatically saved. B. MODE USB / SD / FM / BULETDOOTH function of conversion, and the folder exit. C. circulatory function keys Single cycle, all cycle, random play three playback mode to switch between D.
ECHO effect controller (reverb) 12. LINE IN and MP3 signal input level control 13. MASTER Control the speaker output power 14. 12V external battery connection terminals. 15. Voltage Selector Change AC Power between 110V and 220V 16. Power Supply Switch. 17. Power Supply Input Connector: Use with power cord 18. The battery charge indicator Fitted with a 7AH rechargeable battery ,can work about 3.5 hours continuously in normal use.
CAUTIONS * Do not wet it or expose to leaks or splashes * Keep it on fresh places * Do not operate it on places with humidity * Do not hold drinks on it.