Data Sheet

AWZ632 v.1.0/I
Battery controller 12VDC/20A
CODE
TYPE
:
:
DESCRIPTION
The AWZ632 battery controller is designed for monitoring the status of the (Capacity: 7÷65Ah/12V (SLA))
battery pack based on the measurements of resistance, continuity of the battery circuit, voltage, and the charge
level. It is also protected against reverse connection and short circuit in the charging circuit. In the case of failure,
a LED light is activated, which is accompanied by switching of relay contacts and acoustic indication.
EN
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Battery controller 12VDC
The battery controller features:
· Microprocessor-based automation system
· Automatic battery test every 5min.
· The measurement of the resistance of the battery
circuit
· Monitoring of the continuity of the battery circuit
· Battery Detection
· Low battery voltage indication - DC operation
· Battery output protection against short-circuit and
reverse polarity connection
· Battery compartment for 7÷65Ah/12V (SLA)
batteries
· Technical output of failure - relay type
· Optical indication of failure (LED)
· Acoustic indication of failure
· "Test" button is at the front panel
· Designed to operate with a 13,8V
uninterruptible power supply unit
· Warranty: 2 years from the production date
Pulsar
®
W
W
1
L
H