Data Sheet

Relay modules
DC power
AWZ 528 v.1.0/II
PU3 relay module
CODE:
NAME:
The PU3 (AWZ528) relay module is to be used in low-voltage installations. It is intended for controlling
and status indication in e.g. alarm or access control systems. It may be used to control devices of high power
consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources
relating to the outputs of the module. The module is adapted for connection of cables with a maximum cross
section of
2
1mm .
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail:[e-mail]
Pulsar
®
EN
DESCRIPTION
SPECIFICATIONS
Supply voltage coil
10÷14VDC (-/+5%)
Coil control current
17mA@12VDC
Coil resistance
720Ω (-/+10%)
Coil power
200mW
Number of relays
3
Voltage of the relay’s contacts
30VDC / 50VAC max.
Current of the relay’s contacts
(resistive load)
1A max.
ON/OFF time
10ms/5ms (-/+5%)
LED indication red LED L1÷L3 - the state of relay activation
Operating conditions
2nd environmental class, -10°C ÷ 50°C
Dimensions
L=70, W=43, H=20 [mm, +/-2]
Installation
A mounting panel with an adhesive tape,mounting screws x 2 (holes 3mm)
Connectors
Ф0,41÷1,29 (AWG 26-16) 0,2 ÷ 1mm
2
Declarations, warranty
CE, 2 year from the production date
Net/gross weight
0,04kg / 0,06kg