Use Instruction

X2 Wireless Gaming Mouse
Model No.:PX201
Function layout
3 . T he indicator color will indicate the DPI level as below:
4 00 DPI: cyan color blink . 80 0 DPI: blue color. 1 6 0 0 DPI: purple color.
3 2 0 0 DPI: white color.
Note:
1 ) . DPI can be set by software , MAX DPI is 2 6 0 0 0 dpi
2 ) . DPI led effects can be set by software and can turn off the DPI led to save power
Polling rate:
1 2 5 - 2 5 0 - 5 0 0 - 1 0 0 0 Hz can be set by software , default polling rate is 1 0 0 0 Hz
W ired and w ireless function:
1 . W ired and wireless mode switch automatically, when you plug the receiver into
computer without cable connection , it will work as wireless mode .
2 . If you connect the cable from computer to the mouse , it will switch to wired mode
automatically and work as wired mode .
Low power and charging indication
1 . Low power indication: when mouse battery power is low, the indicator led will blink
Red color , then you need charge the mouse battery by connection type- c cable .
2 . D uring charging the yellow color led in the wheel will flash , after the battery
charging full , the indicator will back to previous color mode .
P ai r i n g
1 . If your mouse lose connection , you need to use pairing tool to pair the mouse
and receiver again
Note: If you need customize function , pls dow nload the software from website
Mai n Specification
S ize: PX201 :120 .5x63 .5x38mm
Weight:
P X 2 0 1 : 5 6 g
S witch
Kailh GM 8 . 0
S en sor
PAW3395
Max DPI
26000
Default DPI:
400-800- 1600-3200DPI
IPS
6 5 0 ips
Ac c e lerat io n
5 0 g( Max)
Polling rate
125- 2 50-500- 10 0 0Hz
I nterface
USB 2 .0
Battery type
L i- ion Polymer Battery
Battery capacity
300 mA h
R
11
4
5
1
6
3
7
2
12
10
8
1
2
3
4
5
Left click
R ight click
M iddle click
Forward
Backward
7
8
9
10
11
Scroll down
Power off
Power O n
DPI button
I ndicator
6
Scroll up
11
Type- c connector
CAUTION
1 . Keep the battery dry.
2 . Avoid locating the battery terminals near metallic object .
3 . Do not short- circuits and avoid metallic or water come into mouse to cause battery short
4 . Use computer USB and specified cable to charge the mouse
Inst ruction
Mouse instruction:
1 . Take out the wireless USB N ano receiver from package .
2 . P lug the receiver into your computer USB port or use extension adaptor.
3 . Turn on the mouse power by switching the power switch on the bottom of the mouse .
4 . Waiting for computer installation finished .
DPI setting and indication:
1 . DPI level: 40 0 - 8 0 0 - 16 0 0 - 32 0 0 ,total 4 levels DPI .
2 . P ress DPI button on bottom to change DPI .
9
ating