POWER DOCK INSTRUCTION MANUAL
02 WHAT’S INSIDE: A B A: Power Dock B: USB-C Power Cord
03 QUICK START: 1 ON / OFF Using the USB-C Power Cord fully charge the Power Dock before first use. The LED indicators will illuminate 4 WHITE dots when fully charged.
04 2 Output power Input power To charge an external device, plug directly into the USB-A input port. To charge the Power Dock, plug directly into the USB-C output port.
05 3 Tilt the Peak Pro forward into the Power Dock and then push down into the base to begin wireless charging.
06 4 An indicator will illuminate BLUE on the Power Dock when connection is established. The Peak Pro will also illuminate and pulse while charging. *Tip - Align Peak Pro charging port towards area indicated with arrow for faster charge.
07 5 Remove the Peak Pro in the reverse order shown in step 3 to initiate Ready Mode. Ready Mode is the pre-set bowl temperature of your choosing which can specified in the Peak Pro App.
08 TIPS AND WARNINGS If the Power Dock does not respond once it is powered on, the battery capacity may be low. Follow the instructions for charging the Power Dock and check the WHITE illuminated battery level indicator. Do not charge or operate below 32ºF or above 100ºF. Keep away from moisture and high-humidity. Store in a cool, well-ventilated place when possible. LEGAL 2020 Puff Corp. All rights reserved, Puffco and Peak Pro are trademarks of Puff Corp., registered in the U.S. and other countries.
760-00037 by Puffco Creation Labs - Subject to alterations · All rights reserved
Product marketing name: 051894 Responsible party Info: Company: Puff Corporation Address: 1201 W 5th Street Suite T530, Los Angeles 90017 Contact Tel: +1 949 292 7260 Email address/Website: Manuel@puffco.