User Manual

Sonor Evo Bluetooth Speaker - Product Manual

Important: pTron Sonor Evo is set at 50% default volume. Please adjust the volume through the control panel on

the speaker.

“>” Multi-function Button (MFB)

“+” Volume Up & Next Song

“-” Volume Down & Previous Song

Power On & Pairing

1. Power On the speaker by sliding the Power button towards the left side.

2. Open Bluetooth function on your Device and Search for the Available Bluetooth devices.

3. Click on “pTron BT Speaker' to connect.

Power Off

Power Off the speaker by sliding the Power button towards the right side.

Bluetooth Connectivity - Automatic

Just Turn On the Speaker. It will Automatically Connect to the Last Connected Device.

Note: The last connected device must be in 10 meters wireless range and Bluetooth function must be On.

Use TF Card

Insert a TF card into the slot to activate the TF card mode.

Use USB Drive

Insert a USB stick or pen drive into the slot to activate the USB drive mode.

Mode Button

If a TF card/USB drive is already plugged into the speaker but you want to play a song via Bluetooth then just

press the Mode button to enable playback thru Bluetooth connected device. To switch back to playback from TF

card/USB drive, just press the Mode button again.

PAGE 1
Sonor Evo Bluetooth Speaker - Product Manual Important: pTron Sonor Evo is set at 50% default volume. Please adjust the volume through the control panel on the speaker. “>” Multi-function Button (MFB) “+” Volume Up & Next Song “-” Volume Down & Previous Song Power On & Pairing 1. Power On the speaker by sliding the Power button towards the left side. 2. Open Bluetooth function on your Device and Search for the Available Bluetooth devices. 3. Click on “pTron BT Speaker' to connect.
PAGE 2
Call & Music Functions Answer/Hangup a Phone Call: Press MFB (>) Once Reject a Phone Call: Press MFB (>) for 2 seconds Music Play/Pause: Press MFB (>) once Next Song: Press "+" button once Previous Song: Press "-" button once Volume Up: Long Press "+" key Volume Down: Long Press "-" key Re-dial: Press MFB (>) twice in standby mode Note: MFB stands for Multi-function Button Play/Pause button (>) is MFB. Charging the Speaker 1. Connect the Micro USB cable to the charging port on the speaker's backside. 2.