User Manual CSH2 PTN SDI to HDMI Converter All Rights Reserved Version: CSH22013V1.1 www.PTN-electronics.
SDI to HDMI Converter NOTICE: Please read this user manual carefully before using this product. This manual is only an instruction for operators, not for any maintenance usage. The functions described in this version are updated till July 2013. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details. This manual is copyright PTN Electronics Limited. All rights reserved.
SDI to HDMI Converter Table of Contents 1. Introduction ...............................................................................................................1 1.1. Introduction to CSH2................................................................................... 1 1.2. Features ...................................................................................................... 1 1.3. Package Contents .....................................................................................
SDI to HDMI Converter 1. Introduction 1.1. Introduction to CSH2 CSH2 is specialized in converting SDI input signal to HDMI or DVI output signal, and it can transmit digital audio signal via the optical fiber. Integrated with 3G/HD/SD receiver and HDMI encoder, CSH2 can turn the 3G/HD/SD signal to HDMI/DVI signal easily. At the same time, CSH2 can separate the audio signal from the 3G/HD/SD signal, and send it to the HDMI output port, that makes the sound perfectly synchronize with the images.
SDI to HDMI Converter 2. Product Appearance of CSH2 Figure 1 Product Appearance of CSH2 Detailed Connection Instructions: No. Module ① LED ② AUDIO OUT ③ HDMI OUT ④ Dial Switch ⑤ SDI IN Function Check if the system is working in a normal state, and feed back the abnormal information in time. Audio output port, with left and right audio channel for mono output. Using single mode optical fiber for long distance digital audio transmission.
SDI to HDMI Converter HDMI: The LED turns green when output HDMI signal, and turns off when output DVI signal. 3G: Turns on when detects a 3G high definition signal. HD: Turns on when detects a HD signal. SD: Turns on when detects a SD signal. 3. System Connection 3.1. System Diagram Figure 2 System Diagram 3.2. Connection Procedure Please reference to the system diagram before your system installation. A detailed installation procedure is showed as follows. Step1.
SDI to HDMI Converter Note: Please make sure that all the fibers are connected before accessing the power. 4. Specification Video Input Input Input Connector Input Signal Video Output Output Output Connector 1 SDI 1 BNC SD/HD/3G SDI Output Signal 1080P, 1920*1080; 1080I,1920*1080; 720P, 1280*720; 480I (NTSC),576I (PAI).
SDI to HDMI Converter 5. Special Functions Introduction 5.1. Looping Output Function Introduction Looping output function is supported in CSH2, showed in Figure 3. In this mode, the signal pass through the SDI IN port to the SDI LOOP port of the first CSH2, and the SDI LOOP output port can be connected to the SDI IN port of the next CSH2, and so on. Finally it makes a looping output. In this way, one input signal can be allocated to several outputs.
SDI to HDMI Converter 3 1080P @30Hz/29.97Hz 4 1080P @25Hz/24.975Hz 5 1080P @24Hz/23.976Hz 6 720P @60Hz/59.94Hz 7 720P @50Hz/49.95Hz SD mode: 480I @60Hz, 576I @50Hz 6. Panel Drawing Figure 4 Panel Drawing 7. Troubleshooting & Maintenance 1) When images of terminal unit output with ghost, such as the projector output with ghost. Generally this is not a unit faulty, this may be caused by an incorrect setting on the projector or a bad quality of cable.
SDI to HDMI Converter etc.) are connected well before accessing the power of the product. 5) If the POWER indicator doesn’t work or no respond to any operation, please make sure the power cord connection is good. 6) If the output image is interfered, please make sure the system is grounded well.
SDI to HDMI Converter 9. After-sales Service 1) If there appear some problems when running CSH2, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. 2) You can email to our after-sales department or make a call, please tell us the following information about your cases. Product version and name. Detailed failure situations. The formation of the cases.
www.PTN-electronics.com PTN Electronics Limited Tel: +86-755-2846 1819 Fax: +86-755-8471 7796 Email: info@PTN-electronics.com Website: www.PTN-electronics.