Preliminary Draft 3 7545 Hand-Held Computer User Manual -DQXDU\ , 20 ISO 9001 Certified Quality Management System P/N 8000190.
Preliminary Draft 3 © Copyright 20 by Psion Teklogix Inc. 2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9 http://www.psionteklogix.com This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services.
Preliminary Draft 3 Return-To-Factory Warranty Psion Teklogix Inc. provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of Liability provided at: www.psionteklogix.com/warranty The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization.
Preliminary Draft 3 Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC What is RoHS? The European Union has mandated that high environmental standards be met in the design and manufacture of electronic and electrical products sold in Europe, to reduce hazardous substances from entering the environment.
Preliminary Draft 3 TABLE OF CONTENTS Chapter 1: Introduction 1.1 1.2 1.3 1.4 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 7545 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 Contents 2.8 2.9 Checking The Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Data Transfer Between The 7545 And A PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 2.9.1 Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 2.9.2 Using Windows Vista . . . . . . . . . . . .
Preliminary Draft 3 3.5.2 3.5.3 3.5.4 3.5.5 3.5.6 3.5.7 3.6 3.7 3.8 3.9 Contents Scan LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Operating One Dimensional (1D) Internal Laser Scanners . . . . . . . . . . . . . . . . . . . . . .60 Operating Internal PDF Laser Scanners. .
Preliminary Draft 3 Contents 5.5 5.6 5.7 iv Control Panel Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Control Panel Applications: Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 5.6.1 App Launch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 5.6.
Preliminary Draft 3 5.7.4 5.7.5 5.7.6 5.7.7 Contents Outgoing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Active Conn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132 Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 Contents 5.13.2 NetLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 5.14 Teklogix Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 5.15 Total Recall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 6.6.3 6.6.4 6.6.5 6.6.6 6.7 Contents Using the Combo Charger With The 7545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Charging The Spare Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Charge Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 Contents 7.2 7.3 7.6 7.7 Murata Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 Internal Scanner Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201 Internal Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 B.1.4 B.1.5 Contents Diags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-9 Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-10 Appendix C: Bar Code Settings C.1 C.2 C.3 Bar Code Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 Contents C.4 x C.3.11 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-33 C.3.12 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-34 C.3.13 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-35 C.
Preliminary Draft 3 C.5 Contents C.4.26 Postal: Kix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53 C.4.27 Postal: Canadian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53 Non-Decoded Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-54 C.5.1 Options. . . .
Preliminary Draft 3 D.5 D.4.6 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-13 D.4.7 Configuring The Bar Code Decoding Symbologies . . . . . . . . . . . . . . . . . . . . . . . . . . D-13 D.4.8 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14 D.4.9 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 INTRODUCTION 1 1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 7545 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4 About The 7545 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4.1 The 7545 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . . . 8 1.4.
Preliminary Draft 3 2 Psion Teklogix 7545 Hand-Held Computer User Manual
Preliminary Draft 3 1.1 Chapter 1: Introduction About This Manual About This Manual This manual describes how to configure, operate, and maintain the Psion Teklogix 7545 Hand-held Computer. Chapter 1: Introduction provides a basic overview of the 7545 computer. Chapter 2: Basic Checkout describes preparing the 7545 ready for operation, including setting up your radio.
Chapter 1: Introduction Text Conventions 1.2 Preliminary Draft 3 Text Conventions Note: Notes highlight additional helpful information. Important: These statements provide particularly important instructions or additional information that is critical to the operation of the equipment. Warning: These statements provide critical information that may prevent physical injury, equipment damage or data loss. 1.3 7545 Features Rugged design: • • Fully-sealed enclosure (rated to IP65).
Preliminary Draft 3 • • Chapter 1: Introduction 7545 Features IEEE 802.11a/b/g Compact Flash Radio with integrated antenna, operating in 2.4 GHz and 5 GHz bands Bluetooth® radio 2.4 GHz (10 m range) Application software: • • • • Internet Explorer for Windows CE Optimized for use with Open TekTerm (for details, see the TekTerm Software User Manual, P/N 8000073) Wordpad ActiveSync Display: • • • • • • • 320 x 240 (1/4 VGA) graphic colour TFT 8.9 cm (3.5 in.
Chapter 1: Introduction 7545 Features Preliminary Draft 3 Indicators and controls: • • Beeper with volume control LEDs for radio transmit and receive, scanning, battery status, and user applications Bar code applications: • • • • Internal 1D & 2D scan engines: standard, long range, advanced long range, enhanced standard range Fuzzy logic internal scan engine Internal 1.
Preliminary Draft 3 • • Chapter 1: Introduction About The 7545 Hand-Held Computer System backup during battery swap (up to 20 minutes) One week real-time clock backup Network Management: • • • • 1.4 SNMP MIB 2 support Remote software download Remote WLAN management Enhanced security for 802.11 About The 7545 Hand-Held Computer The 7545 is a ruggedized hand-held personal computer, running the Microsoft Windows CE 5.0 operating system.
Chapter 1: Introduction Regulatory Labels 1.4.2 Preliminary Draft 3 Regulatory Labels Figure 1.5 Laser Warning Label LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT (IEC) CLASS II LASER PRODUCT (CDRH) 650-680nm LASER DIODE Max.Output:1.4mW (SCAN ) <1mW(AIM) IEC 60825-1:1993+A1:1997+A2:2001 1081975 MODEL No: 7545 This label is affixed below the scanner window.
Preliminary Draft 3 2 BASIC CHECKOUT 2.1 Features Of The 7545. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.2 Preparing The 7545 For Operation . . . . . . . . . . . . . . . . . 2.2.1 Equipment You Need To Get Started. . . . . . . . . . . 2.3 Powering Up The 7545 . . . . . . . . . . . . . . . . . . . . . . . 2.3.1 Charging The Battery. . . . . . . . . . . . . . . . . . . 2.3.2 Installing The Battery And Switching The Computer On 2.4 Attaching Carrying Accessories . . . . . . . .
Preliminary Draft 3 2.11 Resetting The 7545. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2: Basic Checkout Preparing The 7545 For Operation 2.2 Preliminary Draft 3 Preparing The 7545 For Operation Typically, 7545 Hand-Held Computers are configured at the factory and arrive ready for use. Although these computers are equipped with an internal Compact Flash and SD I/O slot, these slots are not intended for user modification. If a device needs to be changed or added in these slots, contact qualified Psion Teklogix personnel. 2.2.
Preliminary Draft 3 2.5 Chapter 2: Basic Checkout Calibrating The Touchscreen Calibrating The Touchscreen Note: Keep in mind that 7545 Hand-Held Computers can be ordered with or without touchscreens, and that the touchscreen function can be turned off (see “Touch” on page 124). If you have the 7545 touchscreen feature, it is factory-calibrated and ready-to-go; however, over time the touchscreen's operating parameters may change, and it may need to be recalibrated for correct operation.
Preliminary Draft 3 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit If you’re using the keyboard, press [BLUE] [0] to display the Start Menu. Use the [DOWN] arrow key to highlight Settings. Press the [RIGHT] arrow key to display the sub-menu. Highlight Network, and press [ENTER]. Figure 2.7 Network And Dial-Up Connections 2. Choose the radio icon to open the 802.11 Wireless LAN Settings window. In the sample screen, this icon is labelled PTXCF8385P N1. Figure 2.8 802.
Preliminary Draft 3 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit 3. Wireless Statistics Tab When you choose the Wireless LAN icon, an 802.11 Wireless LAN Settings window (PTXCF8385P N1 in the sample below) is displayed. This tab lists your radio statistics. Choosing the Zero button resets the statistics of the last four items: Packets IN, Packets OUT, IN errors and OUT errors. • Display the next tab in this window, Wireless Information. 4.
Preliminary Draft 3 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit This tab lists available networks—any access points that are broadcasting an SSID, and it lists preferred networks—networks that you have configured. Since access points are generally secure, they will most likely not be listed here. By default, 7545 attempts to connect to preferred networks.
Preliminary Draft 3 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit Important: Keep in mind that the 7545 will only communicate with access points that are configured with the same SSID. Ad Hoc And Infrastructure If you are using an Infrastructure network—one in which 7545s must pass data through an access point—leave the checkbox next to This is an ad hoc network blank.
Preliminary Draft 3 Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit Network Key This text box is used to specify a 5 or 13 ASCII character sequence or an equivalent 10 or 26 Hexadecimal digit sequence that matches the active WEP key on the access point. • To assign a Network key, highlight The key is provided automatically, and uncheck the checkbox to disable this option. Figure 2.9 Accessing Network Key And Key Index Disable this option to access Network Key & Key Index fields.
Preliminary Draft 3 Chapter 2: Basic Checkout Assigning An IP Address Saving and exiting the radio setup. Once you have completed the configuration, press [ENTER] or tap on OK. The connection you created will be listed in the Wireless Information tab as a preferred network. The radio will search for the SSID and will compare the WEP and authentication information you specified.
Chapter 2: Basic Checkout Name Servers Tab Preliminary Draft 3 Figure 2.10 Defining An IP Address • Tap the stylus on the radio button next to Specify an IP address to select it. • Type an IP, Subnet Mask and Default Gateway address in the appropriate fields. Press [ENTER] to save your information. 2.7.2 Name Servers Tab Note: If DHCP is enabled, name server addresses are assigned automatically. • In the PTXCF8385P N1 Settings window, display the IP Information tab.
Preliminary Draft 3 Chapter 2: Basic Checkout Advanced Features The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS and DNS resolvers. The format for these fields is ###.###.###.###. 2.7.3 Advanced Features To display the Advanced Wireless Settings dialog box: • Tap the Advanced button in the Wireless Information tab. This window lists the available preferred networks. 2.7.3.
Preliminary Draft 3 Chapter 2: Basic Checkout Summit Client Utility (SCU) For 802.11b/g Radio 2.7.3.3 Changing Network Properties To change the properties of an existing preferred network: • Highlight the network that you want to modify. • Tap on the Properties button. • Make any necessary changes in the Wireless Properties dialog box, and press [ENTER] to save the changes. 2.8 Summit Client Utility (SCU) For 802.11b/g Radio This section describes the Summit Client Utility (SCU).
Preliminary Draft 3 Chapter 2: Basic Checkout Assigning The IP Address The Summit WLAN Adapter Settings menu is displayed (In this screen shown as the SDCCF10G1 menu). 3. Tap on the IP Information tab. Note: Choosing the Renew button forces the 7545 to renew or find a new IP address. This is useful if, for example, you are out of communication range for a longer period of time and your 7545 is dropped from the network. 4. To define a static IP address, tap on the Configure button.
Chapter 2: Basic Checkout Name Servers Tab 2.8.2 Preliminary Draft 3 Name Servers Tab Note: If DHCP is enabled, name server addresses are assigned automatically. • In the SDCCF10G1 window, display the IP Information tab. • In the Summit WLAN Adapter Settings>IP Information tab, tap on the Configure button. • Display the Name Servers tab.
Preliminary Draft 3 Chapter 2: Basic Checkout Using The SCU To Connect To The WLAN The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS and DNS resolvers. The format for these fields is ###.###.###.###. 2.8.3 Using The SCU To Connect To The WLAN This section provides a quick set of steps to create a profile. Detailed information about each of the SCU tabs—Main, Profile, Status, Diags and Global—is provided in Appendix B: “SCU For 802.11b/g Radio”.
Chapter 2: Basic Checkout Using The SCU To Connect To The WLAN Preliminary Draft 3 • Type a name using any alpha-numeric combination to uniquely identify this profile. • Tap on OK to return to the Profile tab. • Tap on Commit to save the profile name. • When a pop-up message indicates that your configuration will be saved, tap on OK. 2.8.3.1 SSID To configure the SSID for the network to which you want to associate: • Type an SSID in the text box to the right of SSID.
Preliminary Draft 3 Chapter 2: Basic Checkout Checking The Scanner Once you’ve completed the configuration: • Tap the Main tab. Tap on the Active Profile button – your new profile will be listed in the drop-down menu. When you tap on the profile you created, the 802.11a/b/g radio module attempts to connect to the network using the following steps: - Associate to the SSID. - Authenticate to the network. - If EAP authentication is being used, derive dynamic encryption keys.
Chapter 2: Basic Checkout Data Transfer Between The 7545 And A PC 2.10 Preliminary Draft 3 Data Transfer Between The 7545 And A PC Data transfer options vary slightly depending on the type of operating system installed in your PC. For Windows XP SP2 operating systems or earlier, Microsoft® ActiveSync® is PC connectivity software that can be used to connect your 7545 to PCs running this software.
Preliminary Draft 3 2.11 Chapter 2: Basic Checkout Resetting The 7545 Resetting The 7545 To perform a Warm or Cold reset, you can access the menu by going to Start>Shutdown. Alternatively you can use the keyboard shortcuts described below. Warm Reset To execute a warm reset: • Press and hold down the [BLUE] key and the [ENTER/ON] key simultaneously for a minimum of six seconds. A warm reset closes open applications; any unsaved data are lost. Installed programs and saved data are preserved.
Preliminary Draft 3
Preliminary Draft 3 3 GETTING TO KNOW YOUR 7545 3.1 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.1 Battery Safety . . . . . . . . . . . . . . . . . . . . 3.1.2 Removing And Installing The Battery Pack . . . . . 3.1.3 Battery Chargers . . . . . . . . . . . . . . . . . . . 3.1.4 Monitoring The Battery And Maximizing Run Time 3.1.4.1 Storing Batteries. . . . . . . . . . . . . . . 3.2 Switching The Hand-Held On And Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 3.6.2 Scan LED Indicators . . . . . . . . . . . . . . . . . . . . . 3.6.3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 3.6.4 Operating One Dimensional (1D) Internal Laser Scanners . . 3.6.5 Operating Internal PDF Laser Scanners. . . . . . . . . . . . 3.6.6 Operating Internal Two Dimensional (2D) Imager Scanners . 3.6.7 Operating RFID/Scanner Modules . . . . . . . . . . . . . . 3.7 Connecting And Disconnecting Tethered Peripherals . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 3.1 Chapter 3: Getting To Know Your 7545 The Battery The Battery The hand-held operates with a lithium-ion battery pack. Preparing the unit for operation requires that a battery pack be charged and installed in the 7545. 3.1.1 Battery Safety Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in the 7545 HandHeld Computer Regulatory & Warranty Guide (PN 8000191). 3.1.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Monitoring The Battery And Maximizing Run Time • Quad Docking Station (Model #HU4004): can charge the battery of up to four handhelds inserted in the docking station while transferring data through an Ethernet connection. • Powered Cradle (Model # HU1010): can charge the hand-held with the battery installed in the hand-held. It can take from 1.5 to 4 hours to charge a battery.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Monitoring The Battery And Maximizing Run Time • The hand-held battery is a ‘smart battery’ with built-in intelligence. The taskbar battery icon is a linear gauge used to estimate the remaining run time of the battery. It is important to note that the battery capacity icon displays quarter percentages of nominal capacity (the capacity of a new battery). An aged battery, even when fully charged, shows somewhat less capacity than nominal.
Preliminary Draft 3 3.2 Chapter 3: Getting To Know Your 7545 Switching The Hand-Held On And Off Switching The Hand-Held On And Off Switching On The Unit • • Press and hold down the [ENTER/ON] key for at least one second. When all four LEDs flash yellow, release the [ENTER/ON] button. Note: If the 7545 is in suspend state, pressing [ENTER/ON] key ‘wakes’ the unit from this state. The screen in which you were working before the computer entered suspend state is displayed.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 The Keys 3.3.1.2 Locking Modifier Keys When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is displayed in uppercase letters in the taskbar. For example, pressing the [BLUE] key twice locks it on—it is displayed as BLUE KEY in the taskbar at the bottom of the computer screen. The locked modifier key will remain active until it is pressed a third time to unlock or turn it off.
Chapter 3: Getting To Know Your 7545 Function Keys, Softkeys And Macro Keys Preliminary Draft 3 The [ESC] Key Generally, this key is used as a keyboard shortcut to close the current menu, dialog box or activity and return to the previous one. The [SPACE] Key Pressing this key inserts a blank space between characters. In a Windows dialog box, pressing the [SPACE] key enables or disables a checkbox.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Function Keys, Softkeys And Macro Keys To access function keys [F11] to [F20]: • Press the [ORANGE] key followed by the appropriate function key. For example: - To access function key [F11], press the [ORANGE] key followed by [F1]. - To access function key [F12], press [ORANGE] followed by [F2], and so on.
Chapter 3: Getting To Know Your 7545 Alphanumeric Keyboard: 58-Key • Preliminary Draft 3 To access [M4], press [ORANGE] [M2]. Macro keys [M5] to [M6] are colour coded in blue print above macro keys [M1] and [M2]. • • 3.3.4 To access [M5], press the [BLUE] key followed by [M1]. To access [M6], press [BLUE] [M2].
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Numeric Keyboard: 36-Key To choose the letter ‘b’: • • Press the [ORANGE] key, and press [2] twice. Press the [ORANGE] key again to unlock or turn it off. To choose the letter ‘c’: • • Press the [ORANGE] key, and press [2] three times. Press the [ORANGE] key again to unlock or turn it off. Creating Uppercase Letters To display a capital letter: • Press the [ORANGE] key and then the [SHIFT] key before typing the alpha character.
Chapter 3: Getting To Know Your 7545 The Keypad Backlight • Preliminary Draft 3 If you do not want to choose any additional alpha characters, press [ORANGE] again to unlock or turn ‘off’ the key and end alpha selection. Choosing Multiple Characters From A Range Of Keys If you plan on choosing alpha characters from a number of different keys, you are not required to press the Accept [Þ] key after each alpha selection.
Preliminary Draft 3 3.4.2 Chapter 3: Getting To Know Your 7545 Adjusting The Contrast Adjusting The Contrast Note: In addition to the manual adjustments described in this section, the display contrast can also be adjusted using the Windows CE Control Panel. Refer to “Backlight” on page 99 for details about this dialog box. The display contrast can be adjusted from the unit keyboard using the [BLUE] key and function keys [F1] and [F2].
Chapter 3: Getting To Know Your 7545 7545 Indicators 3.5 Preliminary Draft 3 • Select the Calibration tab, and then choose the Recalibrate button. • Follow the directions on the calibration screen to calibrate the screen. 7545 Indicators 7545s use LEDs (Light Emitting Diodes), onscreen messages and audio tones as indicators. 3.5.1 LEDs Hand-helds are equipped with four tri-coloured LEDs. This section outlines what these LEDs indicate.
Chapter 3: Getting To Know Your 7545 Onscreen Indicators Preliminary Draft 3 Note: Keep in mind that while the standard 802.11g radio supports the transmit/receive LED, not all radios support this function. Table 3.2 Transmit And Receive LEDs Function Radio Transmit Radio Receive Radio Traffic LED Behaviour LED flashes yellow. LED flashes green. 3.5.1.3 Scan LED Successful scans are indicated in two ways: with a scan LED and with an audio tone. Table 3.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Onscreen Indicators Figure 3.3 Taskbar The taskbar changes dynamically, and only those icons that are applicable are displayed. For example, if a radio is not installed in your 7545, the radio signal icon is not displayed in the taskbar. Windows® Start Button If you are using the touchscreen, you can either tap the Windows icon at the bottom left of the screen, or press [BLUE] [0] to display the Start Menu, and then tap on the desired application.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Onscreen Indicators Battery Gauge The battery shaped icon displayed in the taskbar provides a visual indication of the remaining battery power. The icon acts as a meter that is either full, at three-quarter level, half, quarter level or empty. When the battery level is low—approximately 15 minutes from empty—a warning window pops up. When the battery power is completely depleted, a final warning window indicates that the 7545 will be powered down.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Audio Indicators Docking Device When a hand-held is inserted in a docking station, charger or cradle, an associated icon appears in the taskbar. Gang Charger, Combo Charger & Combo Docking Station Quad Docking Station Power Cradle Portable Docking Module (PDM) Bluetooth Radio This icon displayed in the taskbar represents the installed Bluetooth radio. Security Level Security levels can be set to limit user access.
Chapter 3: Getting To Know Your 7545 Internal Scanners 3.6 Preliminary Draft 3 Internal Scanners Important: For detailed scanner specifications and decode zone tables, refer to “Internal Scanners and Imagers” on page 202. The 7545 supports a wide range of scanner options to address a variety of user application requirements. The scanner installed in your unit can be configured using the Scanner Settings dialog box in the Control Panel (see page 135) and the Manage Triggers application (see page 113).
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Scanning Techniques chapter. “Scanning Techniques” on page 59 outlines the mechanics of a successful scan. In addition, review “Scan LED Indicators” on page 59 to better understand how to interpret whether or not a bar code has been successfully scanned. Finally, “Troubleshooting” on page 60 provides some helpful suggestions should the scan fail. 3.6.
Chapter 3: Getting To Know Your 7545 Troubleshooting 3.6.3 Preliminary Draft 3 Troubleshooting If the scanner is not working, investigate the following: • • • • • • • 3.6.4 Is the unit on? Check that the bar code symbology being scanned is enabled for the hand-held you are using. Check any other parameters that affect the scanning procedure or the bar code. Check the bar code to make sure it is not damaged. Try scanning a different bar code to verify that the problem is not with the bar code.
Preliminary Draft 3 Chapter 3: Getting To Know Your 7545 Operating Internal Two Dimensional (2D) Imager Scanners 3.6.6 Operating Internal Two Dimensional (2D) Imager Scanners An imager scanner takes a snap shot of a single bar code or multiple bar codes (at one time). It can find a bar code regardless of its orientation—that is, even a bar code printed at a 45 degree angle to the hand-held will be decoded successfully.
Chapter 3: Getting To Know Your 7545 Uploading Data In A Docking Station 3.9 Preliminary Draft 3 Uploading Data In A Docking Station The Combo Docking and Quad Docking peripherals allow your hand-held to link to an Ethernet network. They are typically used to upload transaction data to a server computer when a radio link is not available. When a 7545 is properly inserted in a docking station, a dock icon is displayed in the taskbar at the bottom of the unit screen.
Preliminary Draft 3 • • Chapter 3: Getting To Know Your 7545 Cleaning The 7545 Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The 7545 has a plastic case that is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions. To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.
Preliminary Draft 3
Preliminary Draft 3 4 WINDOWS EMBEDDED CE 5.0 4.1 Navigating In Windows CE And Applications. . . . . 4.1.1 Navigating Using A Touchscreen And Stylus 4.1.2 Navigating Using The Keyboard. . . . . . . 4.2 Working With Files, Folders And Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 69 69 71 4.3 The Startup Desktop . . . . . . . . . . . . . 4.3.1 The Desktop Icons . . . . . . . . . 4.3.
Preliminary Draft 3 68 Psion Teklogix 7545 Hand-Held Computer User Manual
Preliminary Draft 3 Chapter 4: Windows Embedded CE 5.0 Navigating In Windows CE And Applications 4.1 Navigating In Windows CE And Applications Note: In order to access many of the menus discussed in this chapter, the security level must be set to ‘Supervisor’ (see “Security Settings” on page 76). Graphic user interfaces like Windows CE for portable devices and desktop Windows (2000, XP, etc.) utilize ‘point and click’ navigation.
Chapter 4: Windows Embedded CE 5.0 Navigating Using The Keyboard Table 4.
Preliminary Draft 3 4.2 Chapter 4: Windows Embedded CE 5.0 Working With Files, Folders And Programs Working With Files, Folders And Programs Figure 4.1 Working With Windows Icons Folder Program Icon File • Double-tap on the appropriate icon—either a folder icon, a program icon or a file icon—to open or launch your selection. If you’re using the keyboard: • • 4.3 Use the arrow keys to highlight the icon you want to open or launch. Press [ENTER].
Chapter 4: Windows Embedded CE 5.0 The Desktop Icons Preliminary Draft 3 Figure 4.2 The 7545 Startup Desktop To access desktop icons: • Double-tap on the icon to open a window or, in the case of an application icon, launch an application. On the keyboard: • Use the arrow keys to highlight the icon, and press [ENTER] to launch the highlighted icon. Note: If the arrow keys do not highlight the desktop icons, the desktop may not be selected.
Preliminary Draft 3 Chapter 4: Windows Embedded CE 5.0 The Taskbar Internet Explorer Choosing this icon launches Internet Explorer—a standard Windows CE version. Keep in mind that your supervisor will need to set up access using the Internet Options and the Network and Dial-up Connections icons in the Control Panel. Remote Desktop Connection This option allows your 7545 to communicate with a remote desktop PC. “Remote Connect” on page 89 provides a website with step-by-step instructions. 4.3.
Chapter 4: Windows Embedded CE 5.0 The Taskbar Preliminary Draft 3 4.3.2.1 Using The Taskbar A tooltip is displayed as each taskbar icon is highlighted. The tooltip provides the status of each icon. If you’re using the touchscreen: • Tap and hold the stylus on an icon to display the icon's tooltip. Double-tap the icon to open the Control Panel dialog box associated with the icon. For example, double-tap the battery icon to display a dialog box listing the current battery capacity information.
Preliminary Draft 3 Chapter 4: Windows Embedded CE 5.0 The Start Menu • Tap the stylus on the items you want to activate or deactivate. The check mark indicates active items. If you’re using the keyboard: • 4.4 Highlight the options you want to activate, and press the [SPACE] key to select them. A check mark indicates active items. The Start Menu Note: Some of the Start Menu items may be disabled based on the current 7545 security settings.
Chapter 4: Windows Embedded CE 5.0 The Desktop Preliminary Draft 3 If the menu item has an underlined character: • 4.4.1 Type the underlined alpha character. For example, to display the Security dialog box, type the letter ‘s’. The Desktop Choosing the Desktop option from the Start Menu displays the 7545 desktop. 4.4.2 Security Settings Choosing the Security option from the Start Menu displays a dialog box in which you can define the access level for the 7545: Supervisor or User.
Preliminary Draft 3 Chapter 4: Windows Embedded CE 5.0 Security Settings To allow access to all the Start Menu and taskbar options: • • • In the Security Level dialog box, select the radio button next to Supervisor. In the Password field, type the Supervisor level password. The default password is 123456. Select OK. You can now access all menu items in the Start Menu along with the icons in the taskbar.
Chapter 4: Windows Embedded CE 5.0 Programs 4.4.3 Preliminary Draft 3 Programs • Choose Programs to display a sub-menu of options. Figure 4.3 Program Sub-Menu This sub-menu allows you to choose ActiveSync and Command Prompt, and you can access the Internet Explorer, installed applications (e.g., Microsoft WordPad), Remote Connect or Windows Explorer. ActiveSync® This option allows you to connect to another device using ActiveSync.
Preliminary Draft 3 Chapter 4: Windows Embedded CE 5.0 Shortcuts Internet Explorer The 7545 is equipped with Microsoft Internet Explorer for Windows CE. You can access the Internet Options icon through the Start Menu under Settings, Control Panel or by doubletapping on the desktop icon My Device and then, double-tapping on the Control Panel icon.
Chapter 4: Windows Embedded CE 5.0 Shortcuts • • Preliminary Draft 3 Use the arrow keys to highlight an icon, for example, the security icon. Press [ENTER] to display the security level dialog box. Cycle Tasks When Cycle Tasks is selected (and the Task Manager is not open), you can cycle through active applications. To cycle through your active applications: • • Choose Shortcuts, Cycle Tasks, or Press [ALT] [TAB].
Preliminary Draft 3 4.4.5 Chapter 4: Windows Embedded CE 5.0 Settings Settings The Settings sub-menu includes the following settings: Control Panel, Network and Dialup Connections and Taskbar and Start Menu. Figure 4.5 Settings Sub-Menu Control Panel The Control Panel contains applets used to configure hardware, the operating system and the shell. If your 7545 is running with the Psion Teklogix TekTerm application or another application, additional configuration applets may appear in the Control Panel.
Chapter 4: Windows Embedded CE 5.0 Run 4.4.6 Preliminary Draft 3 Run Choosing the Run option from the Start Menu displays a dialog box in which you can enter the name of the program, folder or document you want to open or launch. 4.4.7 Shutdown The Shutdown menu includes these options: Suspend, Warm Reset and Cold Reset. Note: This menu varies slightly depending on the security level chosen. When the 7545 is set to User level, the Shutdown option is replaced by Suspend. A sub-menu is not available.
Preliminary Draft 3 Chapter 4: Windows Embedded CE 5.0 Using A Dialog Box Suspend The Suspend option suspends the 7545 immediately. This is equivalent to turning the handheld off. Warm Reset The Warm Reset option resets the 7545, leaving all saved files and (registry) settings intact. Any unsaved data is lost. Cold Reset The Cold Reset option resets the 7545 (see page 35). Any files not stored in permanent memory are lost; however, the registry settings are saved. 4.
Chapter 4: Windows Embedded CE 5.0 Using A Dialog Box Preliminary Draft 3 Dialog boxes contain one or more of the following elements: Tab: A tab separates different elements of a dialog box. Press the [TAB] key until a tab in the dialog box is highlighted. To display adjoining tabs, press the [RIGHT] or [LEFT] arrow key. To display the information in the next tab from anywhere in the window, press [CTRL] [TAB]. Textbox: A textbox requires that you type information.
Preliminary Draft 3 5 CONFIGURATION 5.1 Remote Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 5.2 The TekTerm Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 5.3 Pocket PC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 5.4 The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 5.5 Control Panel Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 5.6.7.7 Built In Devices . . . . 5.6.8 Stylus Properties. . . . . . . . . 5.6.8.1 Double-Tap . . . . . . . 5.6.8.2 Calibration . . . . . . . 5.6.8.3 Touch . . . . . . . . . . 5.6.9 Volume And Sounds Properties . 5.6.9.1 Volume Adjustments . . 5.6.9.2 Sound Adjustments. . . 5.7 Bluetooth Setup . . . . . . . . . . . . . . 5.7.1 Devices . . . . . . . . . . . . . 5.7.2 Headset . . . . . . . . . . . . . 5.7.3 Servers. . . . . . . . . . . . . . 5.7.4 Outgoing. . . . . . . . . . . . . 5.7.
Preliminary Draft 3 5.11.2.3 Removing An Existing Community . 5.11.3 Trap Destination. . . . . . . . . . . . . . . . 5.11.3.1 Enabling Authentication TRAPS . . 5.11.3.2 Adding A Destination . . . . . . . . 5.11.3.3 Changing A Destination . . . . . . . 5.11.3.4 Removing A Trap Destination . . . . 5.11.4 Permitted Hosts . . . . . . . . . . . . . . . . 5.11.4.1 Adding A Host . . . . . . . . . . . . 5.11.4.2 Changing A Host. . . . . . . . . . . 5.12 The Storage Manager . . . . . . . . . . . . . . . . . . 5.12.
Preliminary Draft 3
Preliminary Draft 3 5.1 Chapter 5: Configuration Remote Connect Remote Connect Remote Connect is a 7545 application used to connect to a Windows Terminal Server so that you can run a “session” on the Server machine, using the 7545 (Windows CE device). Refer to the following website for step-by-step information about setting up this connection: http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp, or contact Psion Teklogix support services. 5.
Chapter 5: Configuration Control Panel Icons Preliminary Draft 3 • Use the stylus to tap on Settings>Control Panel. If you’re using the keyboard: • • Press [BLUE] [0] to display the Start Menu. Highlight Settings in Start Menu, and press the [RIGHT] arrow key to highlight the Control Panel. • Press the [ENTER] key. The Control Panel folder contains icons used in the setup of your 7545. Figure 5.1 Control Panel Icons 5.
Preliminary Draft 3 Chapter 5: Configuration Control Panel Icons brief description of each. Section 5.6: “Control Panel Applications: Basic Setup” describes the basic configuration for these applications. App Launch Keys By mapping keys to applications using this program, you can then launch those applications from a single key-press. Bluetooth Devices Provides options for Bluetooth radio setup.
Chapter 5: Configuration Control Panel Icons Preliminary Draft 3 Internet Options Provides options to configure your Internet browser. You can determine items such as the default and search page that the browser applies when connecting to the Internet, the cache size, the Internet connection options, and the security level that is applied when browsing. IPv6 Support Refers to a new Internet Protocol specification (version 6) that has been published to use 128-bit IP addresses (replacing version 4).
Preliminary Draft 3 Chapter 5: Configuration Control Panel Icons Power Displays battery pack power status. (Alternately, battery status can be accessed through the taskbar.) Additional tabs allow you to determine suspend states, specify a suspend threshold and, when seated in either the Combo Dock or Quad Dock, determine whether or not a battery that requires it can be recalibrated. This dialog box also allows you to activate card slots. (Refer to “Devices” on page 122 for details.
Chapter 5: Configuration Control Panel Applications: Basic Setup Preliminary Draft 3 Teklogix Error Handling Service Is an error diagnostic tool that enables you to log error messages to report to Psion Teklogix. Teklogix Scanners Provides scanner parameters and the bar code symbologies that the 7545 scanner will successfully read. Teklogix Imagers The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings.
Preliminary Draft 3 Chapter 5: Configuration App Launch Keys To assign an application key: • Tap the Add button. • Press the key you want to use to launch an application. (If an unsupported key is pressed, a message appears on this screen letting you know.) The cursor moves to the App field and a new screen is displayed where you can choose the application to which you want to assign the application key.
Chapter 5: Configuration Certificates Preliminary Draft 3 The cursor moves to the Data field. You can use this field if you need to define special parameters to your application launch key. If you don’t want to assign any parameters, you can leave the Data field blank. If, for example, you want to assign an application launch key to launch the WordPad application, you can leave this field blank.
Preliminary Draft 3 Chapter 5: Configuration Display Properties and Trusted Authorities certificates establish the identity of the servers with which you can connect. You can import or remove certificates, and view certificate information for any listing, including names, dates, serial numbers, etc. Note: When importing certificates, the 7545 only recognizes .cer files. 5.6.3 Display Properties • In the Control Panel, choose the Display icon.
Chapter 5: Configuration Display Properties 5.6.3.1 Preliminary Draft 3 Background • In the Display Properties dialog box, open the Background tab. This dialog box allows you to customize your background image. 5.6.3.2 Appearance • In the Display Properties dialog box, open the Appearance tab. This dialog box allows you to customize the display colour scheme.
Preliminary Draft 3 5.6.3.3 Chapter 5: Configuration Display Properties Backlight The backlight is activated for a configurable amount of time if the ambient light is below a specified threshold and if the 7545 is in use (key press, scanner trigger). The Display Properties dialog box in the Control Panel allows you to specify the intensity of the backlight along with how the backlight behaves in low-light conditions and when the unit is not in use.
Chapter 5: Configuration Display Properties Preliminary Draft 3 Bright For The value chosen from this drop-down menu determines the duration of time that the backlight stays on at the configured intensity after the last user action (keypress, scan trigger).
Preliminary Draft 3 5.6.4 Chapter 5: Configuration Input Panel Input Panel The 7545 is equipped with at Soft Input Panel (SIP). Soft Keyboard Input Panel Button Icon Tapping on the Input Panel button displays a soft input panel (soft keyboard) that can be customized using the Input Panel dialog box. Important: If the Input Panel button icon is not visible in the taskbar, from the ‘Start’ menu, tap on Settings>Taskbar and Start Menu. Tap the checkbox next to ‘Show Input Panel Button’.
Chapter 5: Configuration Keyboard Properties Preliminary Draft 3 Figure 5.2 Input Panel Properties • Tap on the Options button to change the appearance of your soft keyboard. Note: You can also display this dialog box by double-tapping on the Input icon in the farright corner of the taskbar. Figure 5.3 Soft Keyboard Options 5.6.
Preliminary Draft 3 Chapter 5: Configuration Keyboard Properties 5.6.5.1 Key Repeat Note: These settings apply when a key is held down continuously. • In the Keyboard Properties dialog box, open the Repeat tab. Repeat Delay The value assigned for this parameter determines the delay in milliseconds between repeat characters. Sliding the Repeat Delay bar to the left increases the delay between key repeats, and sliding the bar to the right shortens the repeat delay time.
Chapter 5: Configuration Keyboard Properties Preliminary Draft 3 5.6.5.2 Keyboard Backlight • In the Keyboard Properties dialog box, open the Backlight tab. ON Threshold The ON Threshold sliding bar allows you to determine how dark the ambient light needs to be before the keyboard backlight turns on. Intensity This parameter is used to adjust the light intensity of the 7545 keyboard backlight.
Preliminary Draft 3 Chapter 5: Configuration Keyboard Properties 5.6.5.3 Keyboard One Shot Modes • In the Keyboard Properties dialog box, open the One Shots tab. The options in this tab allow you to determine how modifier keys on your 7545 behave. For each modifier key—[ALT], [SHIFT], [CTRL], [ORANGE] and [BLUE]—you have the following options in the drop-down menu: Lock, OneShot, and OneShot/Lock. Note: Keep in mind that checking the taskbar lets you know whether or not these keys are locked on.
Chapter 5: Configuration Keyboard Properties Preliminary Draft 3 OneShot/Lock OneShot/Lock allows you to combine these functions. When you choose this option and you press the modifier key once, it remains active only until the next key is pressed. If you press the modifier key twice, it is locked ‘on’, remaining active until the modifier key is pressed a third time to turn it ‘off’. 5.6.5.4 Keyboard Macro Keys • In the Keyboard Properties dialog box, open the Macros tab.
Preliminary Draft 3 Chapter 5: Configuration Keyboard Properties A message screen is displayed instructing you to Enter Key Strokes to Record • Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro. • When you’ve finished recording your macro sequence, press the key sequence: [CTRL] [ALT] [ENTER], or choose the Stop Recording button.
Chapter 5: Configuration Keyboard Properties Preliminary Draft 3 5.6.5.5 Unicode Mapping • In the Keyboard Properties dialog box, open the Unicode Mapping tab. The Unicode Mapping tab is used to map combinations of virtual key values and [CTRL] and [SHIFT] states to Unicode™ values. This tab shows the configured Unicode character along with the Unicode value. For example, the sample screen above shows “a (U+0061)” indicating that the character “a” is represented by the Unicode value “0061”, and so on.
Preliminary Draft 3 Chapter 5: Configuration Keyboard Properties • Choose the Add/Change button. • Highlight a value in the Unicode mapping list. In the sample screen above, a value will be assigned to virtual key 0 (VK 0). Position the cursor in the Unicode Mapping field, and type a Unicode value for the highlighted key. • Note: To add a shifted state, [SHIFT] and/or [CTRL], press [TAB] to position the cursor in the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’.
Chapter 5: Configuration Keyboard Properties Preliminary Draft 3 key presses that occur when the [BLUE] modifier is on; the Orange table defines key presses that occur when the [ORANGE] modifier is on. The default mappings of these scancodes can be overwritten for each of these three tables using the Scancode Remapping tab accessed from the Keyboard Properties dialog box. The first column in the Scancode Remapping tab displays the scancodes in hexadecimal.
Preliminary Draft 3 Chapter 5: Configuration Keyboard Properties The Remap Scancode dialog box is displayed. • Type the scan code in hexadecimal in the field labelled Scancode Note: The Label field displays the default function of the scancode you are remapping. Virtual Key, Function And Macro The radio buttons at the bottom of the dialog box allow you to define to what the scan code will be remapped: Virtual Key, Function or Macro.
Chapter 5: Configuration Keyboard Properties Preliminary Draft 3 Removing A Remap To delete a remap: • • In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Remove button. Tap on OK. 5.6.5.7 Lock Sequence The Lock Sequence menu allows you to lock the 7545 keyboard to prevent keys from being pressed accidentally when, for example, the unit is inserted in a holster. • • • To lock the keyboard, tap in the checkbox next to Enable key lock sequence.
Preliminary Draft 3 Chapter 5: Configuration Manage Triggers A locked keyboard icon is displayed in the softkey bar when the keyboard is locked. Locked Keyboard Icon • 5.6.6 Type the key sequence to unlock the keyboard. Manage Triggers Allows users to configure how bar code scanners and other devices such as RFID readers are triggered. You can configure the trigger ID for each trigger button for both single- and double-click, and the double-click time.
Chapter 5: Configuration Manage Triggers • Preliminary Draft 3 In the Manage Triggers screen you’ll see a list of trigger mappings. 5.6.6.1 Trigger Mappings A trigger mapping is an association between a particular key on the keyboard and a driver or application, the module(s)—sometimes referred to as “trigger consumer(s)”—of the trigger source. Along with keyboard keys, the external trigger (scan button) is software-based.
Preliminary Draft 3 Chapter 5: Configuration Manage Triggers Show All Modules By default, the trigger mapping list only shows active mappings. Mappings for drivers or applications that are not currently active are not normally displayed. By checking this checkbox, all mappings, both active and inactive, are displayed. Add Tapping this button brings up the Add Mapping dialog (see page 115), so that you can add new trigger mappings.
Chapter 5: Configuration Manage Triggers Preliminary Draft 3 Trigger Key This drop-down list allows you to specify the source of the trigger events, such as the Soft Scan, Left Scan, etc., for the trigger module selected. Note: It is possible to map the same source to different modules (trigger consumers)—for example, to both the Imager and Non-Decoded Scanner. If so, both devices/operations will occur simultaneously.
Preliminary Draft 3 Chapter 5: Configuration Power Management Properties Module Trigger This identifies the driver or application receiving the trigger presses. Show All Modules By default, inactive owners are not shown. By checking this checkbox, all owners, both active and inactive, are displayed. 5.6.7 Power Management Properties This icon displays a Power Properties dialog box that indicates the unit’s battery capacity and allows you to manage battery use.
Chapter 5: Configuration Power Management Properties Preliminary Draft 3 5.6.7.2 Power Saving Suspend • In the Power Properties dialog box, open the Suspend tab. Power Source This drop-down menu allows you to specify whether the unit is using AC Power or Battery Power. Suspend Timeout Important: Psion Teklogix recommends setting the Suspend value to 10 minutes. To further reduce power consumption, carefully consider the duration of time that the display backlight is ‘on’ (see “Backlight” on page 99).
Preliminary Draft 3 Chapter 5: Configuration Power Management Properties 5.6.7.3 Suspend Threshold And Estimated Battery Backup The Suspend Threshold adjustment tells the system when to shut down when the battery drains. If you choose Maximum Operating Time, the unit will run until the battery is completely empty; the RAM is only backed up for a short period of time.
Chapter 5: Configuration Power Management Properties Preliminary Draft 3 data stored on the computer. Once the 7545 shuts down, it cannot be switched on until a fresh battery is installed, or the unit is inserted in a docking station or cradle. • Slide the Suspend Threshold button to the right to increase the battery capacity reserved for backup purposes. Data will be preserved to a maximum of 124 hours.
Preliminary Draft 3 Chapter 5: Configuration Power Management Properties 5.6.7.5 Advanced Allow Suspend With: This tab allows you to specify whether or not your unit will enter Suspend state while it is operating with an active PPP connection, network interface, or active TCP/IP connection. Low Power Warnings The sliding scale at the bottom of this tab allows you to specify the remaining battery capacity at which a warning message is displayed on the 7545 screen, from 0% to 20%.
Chapter 5: Configuration Stylus Properties Preliminary Draft 3 5.6.7.6 Devices This tab controls power to individual CF and SDIO slots. Enable or disable the checkboxes as needed, then tap on OK to save your changes. 5.6.7.7 Built In Devices This tab controls power to built-in devices such as Bluetooth. Enable or disable the checkboxes as needed, then tap on OK to save your changes. 5.6.8 Stylus Properties Note: Touchscreen calibration may not be enabled on your unit.
Preliminary Draft 3 • Chapter 5: Configuration Stylus Properties In the Control Panel, choose the Stylus icon. 5.6.8.1 Double-Tap • In the Double-Tap menu, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen. 5.6.8.2 Calibration Touchscreens rarely require recalibration. However, if your touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow the directions below.
Chapter 5: Configuration Volume And Sounds Properties Preliminary Draft 3 5.6.8.3 Touch This tab allows you to disable the touchscreen. • 5.6.9 Choose the Touch tab. Select the checkbox next to Disable the touch panel. Volume And Sounds Properties • In the Control Panel, choose the Volume & Sounds icon. 5.6.9.1 Volume Adjustments • • Slide the volume button to the left to lower the beeper volume or to the right to increase the beeper volume.
Preliminary Draft 3 Chapter 5: Configuration Devices operates in the ISM band at 2.4 GHz. Because Bluetooth utilizes a radio-based link, it does not require a line-of-sight connection in order to communicate. Note: The Bluetooth radio uses an internal antenna. The Bluetooth radio is disabled by default. Before you begin the setup process: • • In the Control Panel, tap on the Power icon. Tap on the Built In Devices tab, and tap in the checkbox next to Enable Bluetooth. Tap on OK.
Chapter 5: Configuration Devices Preliminary Draft 3 Pairing A Device To pair devices: • Follow the manufacturer’s instructions to place the device you want to pair in pairing mode • Choose the Devices tab and Scan for devices in your area. • When the scan is complete, highlight the device you want to pair with and either doubleclick or press the Services button. • If a PIN dialog box appears, type your PIN and tap on OK.
Preliminary Draft 3 Chapter 5: Configuration Devices Note: During the scanning process, addresses are located first, followed by names. Only the names of devices that are within the Bluetooth radio coverage range will be retrieved. The Active column indicates whether any service is activated for that device. When a service is activated, the device is displayed in the list even when it is not detected during the scan. The PIN column indicates whether you have a PIN (password) set for the device.
Chapter 5: Configuration Devices Preliminary Draft 3 To add a service to the Outgoing port, an active service must first be deactivated. Then you can choose the Outgoing option from the Activation menu (highlight a service, right-click or press the [SPACE] bar to display the Activation menu). The Authentication and Encryption options can be changed only before activation. To change these after activation, deactivate the service first, then change the options.
Preliminary Draft 3 5.7.2 Chapter 5: Configuration Headset Headset To pair a headset with your 7545: • Place your headset in Discoverable mode. You can do this by following the manufacturer’s instructions in your headset’s user guide. • Search and discover your headset. Choose the Devices tab in Bluetooth Manager and scan for devices in your area. (Note that if this is your first time pairing, the device scan occurs automatically—you do not need to tap on the Scan button to perform a scan.
Chapter 5: Configuration Servers 5.7.3 Preliminary Draft 3 Servers When the Bluetooth connection is initiated from your 7545 to the remote device, the 7545 is called the ‘client’ and the remote is called the ‘server’. The Servers menu displays the server profiles that can be activated in your 7545. There are currently two server profiles available: Serial and Scanner. • Tap on the checkbox to activate the server, and it will display the associated port name beside the server name.
Preliminary Draft 3 5.7.4 Chapter 5: Configuration Outgoing Outgoing Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices (one at a time), but you have the freedom to switch on-the-fly. The Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name. The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The * column indicates the currently selected service.
Chapter 5: Configuration Active Conn. 5.7.5 Preliminary Draft 3 Active Conn. The Active Conn. menu lists the Name, Address, and Type of the currently active connections. The table is periodically updated, but it can take a few seconds before it reflects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning as well as the service connections.
Preliminary Draft 3 5.7.6 Chapter 5: Configuration Properties Properties The Properties menu displays information about your 7545, and provides some port options. The Device Name field shows the device name of your 7545. This name can be changed (see the Note on the previous page for details). Device Class shows the Class of Device (e.g. desktop, hand-held), which is always set to Handheld. Local Bluetooth Address shows the address of your 7545 radio.
Chapter 5: Configuration Search For 5.7.7 Preliminary Draft 3 Search For The Search For menu allows you to specify the services for which the Bluetooth radio will scan. 5.8 Error Reporting Error Reporting allows you to enable or disable Microsoft error reporting prompts. • 5.9 Tap on Start>Settings>Control Panel>Error Reporting icon to access your options.
Preliminary Draft 3 5.10 Chapter 5: Configuration Scanner Settings • Choose the IPv6 Support icon to display the associated dialog box. • Choose the checkbox next to Enable IPv6 Network Support to enable this internet protocol. Scanner Settings The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize.
Chapter 5: Configuration Bar Codes Preliminary Draft 3 5.10.1 Bar Codes 5.10.1.1 Scanner The drop-down menu to the right of the Scanner option allows you to choose configurations for one of the following scanner types, depending on what is installed in/on your hand-held: Decoded (internal), Decoded (Intermec ISCP), Imager and Non-decoded. The symbologies listed in the Barcodes tab change to reflect the scanner you choose and the bar codes it supports.
Preliminary Draft 3 • • Chapter 5: Configuration Bar Codes Restoring Default Settings For the Symbol LS3408 decoded scanner, refer to the programming guide supplied with your scanner. For PowerScan® (PSC) decoded scanners, refer to the PowerScan Programming Guide. 5.10.1.2 Restoring Default Settings If you want to restore the factory defaults after making changes, the defaults can be applied to a selected parameter, sub-tree of parameters or all scanner parameters.
Chapter 5: Configuration Options Preliminary Draft 3 • Press and hold the stylus on the parameter you want to reset. • Choose Default parameter to reset the parameter to the default setting. 5.10.2 Options This tab allows you to tailor the double-click parameters and the display options associated with your scanner. 5.10.2.1 Double Click Parameters Click Time (msec) This parameter controls the maximum gap time (in milliseconds) for a double-click.
Preliminary Draft 3 Chapter 5: Configuration Options sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature. A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep.
Chapter 5: Configuration Translations Preliminary Draft 3 Good Scan Beep And Bad Scan Beep These parameters determine whether or not the 7545 emits an audible scanner ‘beep’ when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either on to enable the beeper or off to disable it. Soft Scan Timeout This parameter is used by the SDK “Scan” function (soft-scan: starting a scan session via the SDK function, instead of a physical user trigger press).
Preliminary Draft 3 • In the Translation menu, tap on the Case # to create rules. • Tap on the No rule drop-down menu to display the rules.
Chapter 5: Configuration Translations Preliminary Draft 3 When you choose a rule, an associated screen is displayed in which you can define the rule. 5.10.3.1 Case Rules The case rules are defined as follows: • • • • • • • No rule—ignored. Search and replace—replaces all instances of the match string. (Note that this rule cannot fail.) Match at index—matches the match string at a specified index. Match and replace at index—matches the match string at a specified index and replaces/changes it.
Preliminary Draft 3 Chapter 5: Configuration Ports 5.10.4 Ports Figure 5.4 Tether, Console, and Port Replicator Port Settings While you cannot configure the scanner, you can configure communications with a serial decoded scanner using the options in this tab. Use these settings to ensure that the communication ports on the 7545 match the settings of the serial devices to which they are connected. If the settings do not match exactly, the devices may not function.
Chapter 5: Configuration Ports Preliminary Draft 3 5.10.4.1 Tether Port (COM1) Note: RS-232 serial communication is one of the modes available on the tether port, located on the side of the 7545. These parameters refer only to external decoded scanner communications. They have no effect if the generic serial device tether cable is plugged in. Baud Double-tapping on this parameter displays a pop-up window in which you can choose an appropriate rate of data transfer. Figure 5.
Preliminary Draft 3 Chapter 5: Configuration Ports Parity This parameter determines the type of parity checking used on the data going through the tether port. Double-tapping on this option displays a pop-up window in which you can choose the appropriate Parity. Stop Bits This parameter specifies the number of stop bits—1, 1.5 or 2—used for asynchronous communication. 5.10.4.2 Console Port (COM3) The console port is accessed via the docking connector on the bottom of the 7545.
Chapter 5: Configuration Ports Preliminary Draft 3 Data Bits Refer to page 144 for details about this parameter. Parity For details, refer to page 145. Stop Bits Refer to page 145 for details about Stop Bits. 5.10.4.3 Port Replicator Tether (COM6) The port replicator tether is a duplicate tether port located on the port replicator module of the 7545 cradles. Figure 5.7 Port Replicator Tether Settings Baud Refer to page 144 for details. Data Bits Refer to page 144 for details about this parameter.
Preliminary Draft 3 Chapter 5: Configuration Ports 5.10.4.4 Port Replicator Port A (COM5) Port Replicator Port A(COM5) is the standard RS-232 DE-9 DTE port on the 7545 port replicator module, available on certain cradle types. Enabled This parameter must be set to ON in order for the 7545 to recognize the device connected to the Port Replicator 9-pin (COM5). Baud Refer to page 144 for details. Data Bits Refer to page 144 for details about this parameter. Parity For details, refer to page 145.
Preliminary Draft 3 Chapter 5: Configuration SNMP (Simple Network Management Protocol) Setup 5.11 SNMP (Simple Network Management Protocol) Setup Simple Network Management Protocol (SNMP) is the protocol used to monitor and manage devices attached to a TCP/IP network (providing they support SNMP). SNMP uses Management Information Bases (MIBs) that define the variables an SNMP Network Management Station can access.
Preliminary Draft 3 Chapter 5: Configuration Communities Contact This field identifies the contact person for this managed node along with information about how to get in touch with this person. The content of this parameter is accessible through MIB-II’s sysContact object. Location This parameter is used to identify the physical location of this node (e.g., Warehouse A: Pillar 32B). The content of this parameter is accessible through MIB-II’s sysLocation object. 5.11.
Chapter 5: Configuration Communities Preliminary Draft 3 5.11.2.1 Adding A Community • Choose the Add button to add a new ‘community’. Name The value assigned here is the name assigned by the network administrator to the set of devices to which this managed node belongs. Rights This menu allows you to specify access, that is, ‘Read-Only’ or Read-Write’ 5.11.2.2 Modifying A Community Setting To modify an existing community: • • Highlight the community you want to alter. Choose the Change button.
Preliminary Draft 3 Chapter 5: Configuration Trap Destination • Highlight the community you want to remove in the Communities tab and then choose the Remove button. A Delete Confirmation screen is displayed. • To remove a community, choose the Yes button, or If you decide not to remove the community, choose the No button. 5.11.3 Trap Destination A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running on the managed node.
Chapter 5: Configuration Trap Destination Preliminary Draft 3 • Choose the Add button. • Type a destination in the text box provided, and press [ENTER]. 5.11.3.3 Changing A Destination To change an existing trap destination: • Highlight the destination you want to alter in the Trap Destination tab, and then choose the Change button. A dialog box like the one displayed when you add a destination is displayed. • Make the changes to the destination, and press [ENTER] to save the changes. 5.11.3.
Preliminary Draft 3 Chapter 5: Configuration Permitted Hosts 5.11.4 Permitted Hosts For security reasons, the Network Administrator may want to restrict SNMP-node access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Managers which are allowed to monitor and manage this device. If no entries are listed, the device will accept SNMP queries from any host. 5.11.4.1 Adding A Host To add a new host: • Highlight the Add button, and press [ENTER].
Chapter 5: Configuration The Storage Manager Preliminary Draft 3 A dialog box like the one displayed when you add a host is displayed. • 5.12 Make the necessary changes, and press [ENTER]. The Storage Manager The Storage Manager allows you to view information about the storage devices that are present in the 7545, such as SD-MMC flash cards and Compact Flash cards. 5.12.1 Formatting A Memory Card Formatting a memory card bulk-erases it.
Preliminary Draft 3 Chapter 5: Configuration Creating Partitions 4. Press the Dismount button to dismount the memory card. All partitions on the card will be dismounted. 5. Press the Format button to format the memory card. All partitions and information on the card will be erased during the formatting process. 5.12.2 Creating Partitions Once the card is formatted, new partitions can be created in it.
Chapter 5: Configuration Partition Management Preliminary Draft 3 4. Press OK. The new partition appears in the Partitions list: The new partition is automatically mounted. This is indicated by an asterisk (*) next to its name in the partition list. Any unallocated space on the card is indicated at the left, and additional partitions can be created in it. 5.12.3 Partition Management Partitions can be individually dismounted, mounted, deleted, or formatted as well.
Preliminary Draft 3 Chapter 5: Configuration Partition Management 2. Tap the Properties button. The Partition Properties dialog appears. 3. Tap the Dismount button. The partition is dismounted. The asterisk disappears next to its name in the partitions list. To delete a partition: 1. Select the desired partition. 2. Tap the Delete button. A warning dialog appears. 3. Tap the OK button. The partition is deleted. To format a partition: 1. Choose the desired partition. 2. Tap the Properties button.
Chapter 5: Configuration Teklogix Error Handling Service Preliminary Draft 3 • Whether to use the transaction-safe FAT file system (TFAT). This file system keeps multiple copies of the file-allocation table, changing one while maintaining another as a backup. • Whether to perform a quick format. Quick formatting removes all reference to data in the partition without erasing the actual partition. The partition will be treated as empty, and new data will overwrite it. 6. Tap Start.
Preliminary Draft 3 • Chapter 5: Configuration NetLog Choose an Error Level, and tap on FlushToFile to log the information file. 5.13.2 NetLog The NetLog option is used to log network traffic. When you tap in the checkbox to the left of Enable NetLog Debug Capturing, debug data is collected so that, if necessary, it can be forwarded to a Psion Teklogix technician for evaluation. You can also define where you want the data stored and the maximum size of the file.
Chapter 5: Configuration Teklogix Imagers 5.14 Preliminary Draft 3 Teklogix Imagers The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings. The principle uses of the applet are to decode bar codes and to capture images. A PTSI Imager demo applet is also provided to illustrate how the imager works. Refer to Appendix D: “Teklogix Imagers Applet” for configuration details. To launch this applet: • In the Control Panel, choose the Teklogix Imagers icon.
Preliminary Draft 3 5.15 Chapter 5: Configuration Total Recall Total Recall Total Recall is a Psion Teklogix utility developed to maintain applications and settings during a cold boot. This utility is based on a backup and restore concept. This utility is based on a backup and restore concept • In the Control Panel, choose the Total Recall icon. 5.15.
Chapter 5: Configuration Creating A Backup Profile Preliminary Draft 3 Profile Information This dialog box lists the possible storage destinations for the profile file. 1. To begin, type a name for the profile in the field labelled Profile Name. 2. Choose the Profile Type you want to create: For this device only—creates a backup that is manually restored by the operator. AutoRestore for this device only—creates a profile that automatically restores itself following a restart.
Preliminary Draft 3 Chapter 5: Configuration Creating A Backup Profile Add Files By default, All Files is selected so that all installed or copied files, database entries, and the Registry will be saved. You can, however, limit the backup to databases, and/or the registry only. By tapping the checkbox next to these items, you can add or remove a check mark to enable or disable the option. The Select Files option allows you to select predefined file types. • • Remove the check mark next to All Files.
Chapter 5: Configuration Creating A Backup Profile Preliminary Draft 3 To add a file to your backup list: • Choose Add Files. Browse to and choose the files you want to add to your list. To remove a file from your backup list: • Choose Remove Files—a dialog box is displayed listing the files that will be backed up. • Highlight the item you want to remove from the list, and tap on the Remove button. Choosing By File Type allows you to select the file types that you want backed up.
Preliminary Draft 3 Chapter 5: Configuration Restoring A Profile View Selections Depending on what you have selected for inclusion in your profile, you can view a list of the selected files, databases and/or registry. • Choose the Next button to perform the operation. Perform The Operation • Choose the Backup button to start the process, and create a profile. 5.15.
Chapter 5: Configuration TweakIT Settings 5.16 Preliminary Draft 3 TweakIT Settings This utility allows you to ‘tweak’ or adjust Advanced system settings (interface, network, servers, driver, and radio), User settings (Internet Explorer settings, font size, and docking port message), and provides a Registry Editor. 5.16.1 Advanced 5.16.1.
Preliminary Draft 3 Chapter 5: Configuration Advanced 5.16.1.2 Advanced Services Settings FTP Server This option is enabled by default to allow file transfers. Keep in mind that data transfer in either direction is restricted to the Temp folder—that is, data are always loaded from the FTP Server to the Temp folder and from the Temp folder to the FTP Server. If this option is disabled, a warm reset must be performed to accept the change.
Chapter 5: Configuration Advanced Preliminary Draft 3 5.16.1.3 Advanced Intermediate Driver Intermediate Driver Support The 7545 employs a custom intermediate driver that is used to indicate radio transmission and reception on its LEDs. As well, the intermediate driver is employed to support the Psion Teklogix 802.IQ v1 protocol. This TweakIt option is included to allow the driver to be disabled in cases where it interferes with third party drivers or security supplicants.
Preliminary Draft 3 Chapter 5: Configuration Advanced 5.16.1.4 Radio Features AP Density This option allows you to determine the signal strength at which the 7545 radio will begin searching for a new Access Point (AP): High, Medium or Low. If, for example, this option is set to High, the radio will begin searching for a new Access Point while still at a fairly strong signal strength.
Chapter 5: Configuration User Preliminary Draft 3 5.16.2 User 5.16.2.1 Internet Explorer Settings This option allows you to customize how your Internet Explorer is displayed and how the tabbing functions. 5.16.2.
Preliminary Draft 3 Chapter 5: Configuration User User Font Size This option allows you to adjust the size of the font used the 7545 display: Large, Normal or Small. 5.16.2.3 User System Settings Docking Port Message Checking this box blocks the message that normally pops up on the display when the 7545 is docked.
Chapter 5: Configuration Registry Editor Preliminary Draft 3 5.16.3 Registry Editor This option is reserved for senior administrators who have a strong understanding of registry keys and values. Careless registry editing can cause irreversible damage to the 7545.
Preliminary Draft 3 7 SPECIFICATIONS 7.1 7545 Hand-Held Computer Specifications. 7.1.1 Hardware . . . . . . . . . . . . . 7.1.2 Software . . . . . . . . . . . . . 7.1.3 Approvals. . . . . . . . . . . . . 7.2 Murata Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 .197 .199 .200 .
Preliminary Draft 3 7.9 HU3000 - 1900 mAh Lithium-ion Battery Pack . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3 7.1 Chapter 7: Specifications 7545 Hand-Held Computer Specifications 7545 Hand-Held Computer Specifications Note: Performance specifications are nominal and subject to change without notice. 7.1.1 Hardware Physical Dimensions • • 102mm width x 62.5mm depth x 260mm (4.0 in x 2.5 in x 10.2 in) length. Keypad area: 75.5mm width x 36mm (3 in x 1.4 in) depth. Weight • • With battery 647g (22.83 oz.) With pistol grip add 86.4g (3.05 oz.) User Interface Color Touchscreen Display: 8.
Chapter 7: Specifications Hardware Preliminary Draft 3 Indicators And Controls: Multi-colour LEDs indicate battery status, application, and radio transmit/receive, user applications. Internal 95dB beeper with volume control. Power • • • • • • • • • • 7.4V @ 1900mAh Li-ion rechargeable battery. Intelligent fast charge. 8-hour battery operation (5 scans, transmit & receive/min.). Built-in gas gauge & performance monitor. Quick swap battery packs. Built-in fast charger (2 hour typical recharge).
Preliminary Draft 3 Chapter 7: Specifications Software Environmental Guaranteed Operating: -10°C to +50°C (14°F to 122°F) Temperature Range: Long exposure to temperatures below -40°C (-40°F) may damage the screen and main battery. Prolonged exposure to temperatures above +60°C (+140°F) will damage the main battery and temperatures above +70°C (+158°F) may damage the unit. Storage Temperature: -25°C to +60°C (-13°F to 140°F) Rain And Dust Resistance: IEC 529, classification IP65.
Chapter 7: Specifications Approvals 7.1.3 Preliminary Draft 3 Approvals Safety: IEC 60950-1 EMC: FCC Part 15 Class B EN 55022 EN 55024 EN 301 489 Laser: IEC 60825-1 Ed. 2.0, Class 1, Class 2 FDA 21 CFR 1040.10 1040.11 Class I, Class II 7.2 Bluetooth: 2.0 RF: Bluetooth and 802.11b/g: EN300 328, Part 15.247 RoHS compliant: EU Directive 2002/95/EC Murata Radio Specifications 802.11b/g Radio: Direct Sequence Spread Spectrum (DSSS) Form factor Embedded surface mount module, 8.2 x 8.
Preliminary Draft 3 Chapter 7: Specifications Internal Scanner Port Murata Bluetooth Radio Form Factor Embedded (920 kbps serial interface) Bluetooth Version Ver 2 compliant - features Adaptive Frequency Hopping (AFH) for better co-existence with 802.11 radio and Enhanced Data Rate (EDR) for up to 3Mbps data rate. Antenna Type Ceramic chip PIFA Antenna Gain 1 dBi peak Transmit Power -3 dBm (0.5mW) minimum, +4 dBm (2.5mW) max Frequency Range 2.400–2.4835 GHz RX Sensitivity (BER<0.
Preliminary Draft 3 7.6.8 SE1223LR - Long Range (decoded) Parameter 7.6.9 Chapter 7: Specifications SE1223LR - Long Range (decoded) SE1223LR Light Source Visible Laser Diode 650 nm Scan Rate 35 (± 5) scans/sec (bi-directional) Scan Angle 23º ± 2º Scan Patterns Linear Minimum Print Contrast Minimum 40% absolute dark/light reflectance measured at 650 nm. Symbologies Supported UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI, UCC/EAN 128, TriOptic Code 39.
Chapter 7: Specifications SE1224HP - High Performance Preliminary Draft 3 Parameter SE1224HP Minimum Print Contrast Minimum 25% absolute dark/light reflectance measured at 650 nm. Symbologies UPC/EAN, Code 128, UCC/EAN 128, RSS, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI. Programmable Parameters Laser On Time, Aim Duration, Power Mode, Trigger Mode, Bidirectional Redundancy, Symbology types/lengths, Data formatting. Ambient Light Artificial: 450 ft. candles (4844 Lux).
Preliminary Draft 3
B Preliminary Draft 3 APPENDIX SCU FOR 802.11B/G RADIO B.1 SCU Tabs . . . . . . . . . . . . . . . . . . . B.1.1 Main . . . . . . . . . . . . . . . . B.1.2 Profile . . . . . . . . . . . . . . . . B.1.3 Status . . . . . . . . . . . . . . . . B.1.4 Diags . . . . . . . . . . . . . . . . B.1.2.1 SCU Security Capabilities. B.1.2.2 SCU EAP Types . . . . . . B.1.2.3 EAP Credentials . . . . . . B.1.2.4 ThirdPartyConfig . . . . . B.1.5 Global. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preliminary Draft 3
Preliminary Draft 3 B.1 Appendix B: SCU For 802.11b/g Radio SCU Tabs SCU Tabs This appendix provides details about each tab in the Summit Client Utility (SCU). For quick, step-by-step setup instructions, refer to “Summit Client Utility (SCU) For 802.11b/g Radio” on page 28. The following sections provide a detailed description of each of the tabs available in the SCU—Main (below), Profile (page B-4), Status (page B-9), Diags (page B-9), and Global (page B-10). B.1.
Appendix B: SCU For 802.11b/g Radio Profile • • B.1.2 Preliminary Draft 3 Driver and SCU: These fields display the version of the device driver and the SCU that are running on the 7545. About SCU: This box provides details about the SCU software. Profile The Profile tab allows you to define radio and security settings that are stored in the registry as part of the configuration profile. The profile you create and save is listed in the Active Profile drop-down menu in the Main tab.
Preliminary Draft 3 Appendix B: SCU For 802.11b/g Radio Profile The following table describes the options in the Radio attributes, Encryption, and EAP Type drop-down menus: Table B.1 Radio, Encryption, And EAP Menus Radio Attribute Description Value Default SSID Service set identifier (SSID) for Maximum of 32 characters. WLAN to which the radio connects. None Client Name Name assigned to radio & 7545 into Maximum of 16 characters. which it is installed. None Power Save Power save mode for radio.
Appendix B: SCU For 802.11b/g Radio Profile Preliminary Draft 3 Table B.1 Radio, Encryption, And EAP Menus Radio Attribute • Description Value Default Credentials Authentication credentials for the selected EAP type. Refer to “EAP Credentials” on page B-7. User: Username or Domain/User- None name (up to 64 characters). Password: up to 64 characters. For PEAP: CA Cert–CA server certificate filename. Encryption Type of encryption used to protect transmitted data.
Preliminary Draft 3 • Appendix B: SCU For 802.11b/g Radio Profile PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traffic. Two different inner methods are used with PEAP: - EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate for use against Windows Active Directory and domains. - EAP-GTC, resulting in PEAP-GTC: This is for authentication with one-time passwords (OTPs) against OTP databases such as SecureID.
Appendix B: SCU For 802.11b/g Radio Profile • • Preliminary Draft 3 If the credentials are not specified in the profile, when the radio tries to associate using that profile, you will be prompted to enter the credentials. When prompted, you can enter valid credentials, enter invalid credentials, or cancel the operation. - If you enter valid credentials and tap OK, the radio will associate and authenticate.
Preliminary Draft 3 B.1.3 Appendix B: SCU For 802.11b/g Radio Status Status The Status tab provides status information including IP address and MAC address for the client radio, IP address and MAC address for the AP, signal strength, channel, transmit power and data rate. B.1.4 Diags Ping Address Ping Results Use the Diags tab as a troubleshooting tool.
Appendix B: SCU For 802.11b/g Radio Global • • • B.1.5 Preliminary Draft 3 Release/Renew: Obtains a new IP address through DHCP and logs all activity in the output area. Start Ping: Starts a continuous ping to the address in the text box next to this button. This is a toggle button so when you tap on it, it changes to Stop Ping. Closing this window or tapping on another button also stops the ping.
Preliminary Draft 3 Appendix B: SCU For 802.11b/g Radio Global Table B.2 Global Tab Global Setting Description Value Default Roam Trigger If RSSI from AP is less than roam dBm: -50, -55, -60, -65, -75 trigger value, radio performs roam scan -70, -75, Custom or probes for an AP with stronger signal. Roam Delta Amount by which second AP’s RSSI must exceed the moving average RSSI for the current AP before the radio will attempt to roam to a second AP.
Appendix B: SCU For 802.11b/g Radio Global Preliminary Draft 3 Table B.2 Global Tab Global Setting Description Default WMM Use Wi-Fi Multimedia Extensions, also On, Off know as WMM. Off TX Diversity Defines how to handle antenna diversity when transmitting data to AP. -Main only: Use main antenna only. -Aux only: Use auxiliary antenna only. -On: Use diversity. Main only RX Diversity Defines how to handle antenna diversity when receiving data from AP.
Preliminary Draft 3 Appendix B: SCU For 802.11b/g Radio Global Table B.2 Global Tab Global Setting Description Value Default Auth Timeout Specifies the number of seconds that An integer from 3 to 60. 8 the software will wait for an EAP authentication request to succeed or fail. If authentication credentials are specified in the active profile and the authentication times out, then association will fail.
Preliminary Draft 3
C Preliminary Draft 3 APPENDIX BAR CODE SETTINGS C.1 Bar Code Settings. . . . . . . . . . . . . . . . . . C.1.1 Scanner Options . . . . . . . . . . . . . C.1.2 Restoring Default Settings . . . . . . . . C.2 Decoded (Internal) Scanners . . . . . . . . . . . . C.2.1 Options . . . . . . . . . . . . . . . . . . C.2.2 Decoded (Internal) Advanced Options . . C.2.3 Decoded (Internal) 2D Scanning Options C.2.4 Decoded (Internal) Data Options . . . . . C.2.5 Code 39 . . . . . . . . . . . . . . . . . . C.2.
Appendix C: Bar Code Settings Preliminary Draft 3 C.3.5 EAN 13 . . . . . . . . . . . . . . . . . . C.3.6 EAN 8 . . . . . . . . . . . . . . . . . . . C.3.7 UPC A . . . . . . . . . . . . . . . . . . . C.3.8 UPC E Settings . . . . . . . . . . . . . . C.3.9 UPC/EAN Shared Settings . . . . . . . . C.3.10 Code 93. . . . . . . . . . . . . . . . . . C.3.11 Codabar. . . . . . . . . . . . . . . . . . C.3.12 MSI Plessey . . . . . . . . . . . . . . . C.3.13 Code 11. . . . . . . . . . . . . . . . . . C.3.
Preliminary Draft 3 C.4.17 2D QR Code . . . C.4.18 2D Maxicode . . C.4.19 2D Aztec . . . . . C.4.20 Postal: PlaNET . C.4.21 Postal: PostNET . C.4.22 Postal: Australian C.4.23 Postal: Japanese . C.4.24 Postal: Korean . . C.4.25 Postal: Royal. . . C.4.26 Postal: Kix . . . . C.4.27 Postal: Canadian . C.5 Non-Decoded Scanners . . . C.5.1 Options . . . . . . C.5.2 Code 39 . . . . . . C.5.3 Code 128 . . . . . C.5.4 EAN 13 . . . . . . C.5.5 EAN 8 . . . . . . . C.5.6 UPC A. . . . . . . C.5.7 UPC E . . . . . . . C.
Preliminary Draft 3
Preliminary Draft 3 C.1 Appendix C: Bar Code Settings Bar Code Settings Bar Code Settings The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize. The parameters are preset with the default settings of the decoded scanner installed in the unit. For a listing of available scanners and their specifications, please refer to Chapter 7: “Specifications”. C.1.
Appendix C: Bar Code Settings Restoring Default Settings Preliminary Draft 3 Important: To improve the decode speed and performance, enable (set to ‘on’) only those codes that are required by the application. Keep in mind that some bar code types are only available when an internal imaging scanner is installed. All internal scanners can be configured using these dialog boxes. External, nondecoded scanners are also configured through the Scanner Properties dialog box.
Preliminary Draft 3 C.2 • Press and hold the stylus on the parameter you want to reset. • Choose Default parameter to reset the parameter to the default setting. Decoded (Internal) Scanners • C.2.1 Appendix C: Bar Code Settings Decoded (Internal) Scanners Options Tap on the Scanner drop-down menu, and choose Decoded (internal). Options Note: Some options are available only for specific scanners. Refer to the option names in this section for scanner model identification.
Appendix C: Bar Code Settings Decoded (Internal) Scanners Decoded (Internal) Advanced Options Preliminary Draft 3 Dot Time (msec) The value selected for Dot Time (msec) determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Decoded (Internal) Advanced Options for battery powered applications, there will be a slight delay while the scanner powers up to scan a bar code. Low Power Timeout To extend laser life, you can select the time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a successful decode restores normal blinking.
Appendix C: Bar Code Settings Decoded (Internal) Scanners Decoded (Internal) 2D Scanning Options Preliminary Draft 3 Linear security level 3 specifies that code types other than the following must be successfully read twice before being decoded. The following codes must be read three times: Code Type MSI Plessey D 2 of 5 I 2 of 5 Length 4 or less 8 or less 8 or less Linear security level 4 requires that all code types be successfully read three times before being decoded.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Decoded (Internal) Data Options Double-tapping on these parameters displays dialog boxes in which you can enter a value from 1 to 15. C.2.4 Decoded (Internal) Data Options Transmit Code ID Char A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol.
Appendix C: Bar Code Settings Decoded (Internal) Scanners Code 39 C.2.5 Preliminary Draft 3 Code 39 Enabled Setting this parameter to on enables “Code 39”. Enable Trioptic Code 39 Note: “Trioptic Code 39” and “Full ASCII” should not be enabled simultaneously. The scanner does not automatically discriminate between these two symbologies. Trioptic Code 39 symbols always contain six characters. Setting this parameter to on allows this type of symbology to be recognized.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Code 39 Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 2 to 55.
Appendix C: Bar Code Settings Decoded (Internal) Scanners Code 39 Preliminary Draft 3 Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 39 symbols. Increasing the performance level reduces the amount of required bar code orientation—this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Code 128 Strip Leading This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added. Note: For Code 39 bar codes, the “AIAG Strip” is performed before the “Strip Leading”. Strip Trailing The value entered in this parameter determines the number of characters that will be removed from the end of the bar code before the suffix character is added.
Appendix C: Bar Code Settings Decoded (Internal) Scanners EAN 13 Preliminary Draft 3 Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.2.7 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.2.8 EAN 8 Enabled Set this parameter to on to enable “EAN 8”.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners UPC E None—no preamble is transmitted. The lead-in characters are considered part of the symbol. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.2.10 UPC E Enabled UPC-E Set this parameter to on to allow “UPC E” bar code scans. Enabled UPC-E1 Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
Appendix C: Bar Code Settings Decoded (Internal) Scanners UPC/EAN Shared Settings Preliminary Draft 3 Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.2.11 UPC/EAN Shared Settings The parameters you set here are a shared across all available UPC and EAN bar codes. Enable Bookland EAN Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes. Supplementals Supplementals are additionally appended characters (2 or 5).
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Code 93 C.2.12 Code 93 Enabled Set this parameter to on to enable “Code 93”, or off to disable it. Set Length L1 And Set Length L2 Lengths for “Code 93” can be set for Any Length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Appendix C: Bar Code Settings Decoded (Internal) Scanners MSI Plessey Preliminary Draft 3 CLSI Editing When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Note: Symbol length does not include start and stop characters. NOTIS Editing When enabled, this parameter strips the start and stop characters from decoded Codabar symbol.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Interleaved 2 of 5 Note: If Two check digits is selected, an MSI Plessey “Check Digit Algorithm” must also be selected. See below for details. Transmit Check Digit If this parameter is enabled, the check digit is included with the bar code data. Check Digit Algorithm When the Two MSI Plessey check digits option is selected, an additional verification is required to ensure integrity.
Appendix C: Bar Code Settings Decoded (Internal) Scanners Discrete 2 of 5 Preliminary Draft 3 Transmit Check Digit If this parameter is enabled, the check digit is included with the bar code data. Convert To EAN 13 If this parameter is enabled, an I 2 of 5 bar code is converted to EAN 13. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.2.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Internal) Scanners Composite Enable RSS-14 (Reduced Space Symbology) RSS-14 code can be either purely linear or split in half with one half stacked on top of the other half. Stacking the code reduces the bar code length, and providing the nominal height of the code is maintained, it can be omni-directionally scanned.
Appendix C: Bar Code Settings Decoded (Internal) Scanners PDF-417 Preliminary Draft 3 C.2.19 PDF-417 Enabled Setting this parameter to on enables PDF-417 two dimensional (2D) coding. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.2.20 Micro PDF-417 Enabled Setting this parameter to on enables “2D Micro PDF-417” bar code scanning.
Preliminary Draft 3 C.3 Decoded (Intermec ISCP) • C.3.1 Appendix C: Bar Code Settings Decoded (Intermec ISCP) Decoded (ISCP) Options Tap on the Scanner drop-down menu, and choose Decoded (Intermec ISCP). Decoded (ISCP) Options Laser On Time The value assigned to this parameter determines how long the laser will remain on when the scan button or trigger is pressed. Double-tapping on this parameter displays a dialog box in which you can enter a value between 1 and 10 seconds. C.3.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) Code 39 Preliminary Draft 3 Low Power Timeout To extend laser life, you can select the time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a successful decode restores normal blinking. When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec, 1 min, 2 min, or 3 min.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Intermec ISCP) Code 39 Full ASCII If this parameter is enabled, the characters +, %, and / are used as escape characters. The combination of an escape character and the next character is converted to an equivalent ASCII character. Reading Range Determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) Code 128 Preliminary Draft 3 Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.3.4 Code 128 Enabled Setting this parameter to on enables “Code 128”. GS1-128 “GS1-128” is the GS1 implementation of the Code 128 barcode specification. The former correct name was UCC/EAN-128. GS1-128 Identifier “GS1-128 Identifier” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Intermec ISCP) EAN 13 code will be transmitted as a single code. If both codes in a pair are detected, they will be concatenated provided that “ISBT Concat Any Pair” (see below) is enabled. ISBT Concat Any Pair Enabling this parameter causes all code pairs that can be, to be concatenated even if they do not comply with Section 4.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) EAN 8 Preliminary Draft 3 Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.3.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled.
Preliminary Draft 3 C.3.8 Appendix C: Bar Code Settings Decoded (Intermec ISCP) UPC E Settings UPC E Settings Enabled Set this parameter to on to enable “UPC E”. Enable UPC-E1 Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Transmit Number System If this parameter is enabled, the number system digit is transmitted with the decoded bar code data.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) Code 93 Preliminary Draft 3 Addendum Add-on 2 And Addendum Add-on 5 Enabling these parameters sets the length of the addendum bar code to either 2 or 5 characters. Addendum Security If you tap on “Addendum Security”, a dialog box is displayed in which you can define the security level of add-on 2 or add-on 5 with a value from 0 to 100. As security levels increase, the scanner decode speed decreases.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Intermec ISCP) Codabar C.3.11 Codabar Enabled Set this parameter to on to enable “Codabar”. Start/Stop Transmit Codabar can use the following sets of characters as start and stop characters: a, b, c, d A, B, C, D a, b, c, d, /, t, n, *, e DC1, DC2, DC3, DC4 Thus, when a set is chosen, the first and last digits of a Codabar message must be one of those characters and the body of the message should not contain these characters.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) MSI Plessey Preliminary Draft 3 Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.3.12 MSI Plessey Enabled Set this parameter to on to enable “MSI”. Enable Plessy Set this parameter to on to enable “Plessy”. Check Digit Verification The available options for this parameter are MOD 10 Check and Double MOD 10 Check.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Intermec ISCP) Code 11 C.3.13 Code 11 Enabled Set this parameter to on to enable “Code 11”. Check Digit Verification The available options for this parameter are MOD 10 Check and Double MOD 10 Check.This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) Matrix 2 of 5 Preliminary Draft 3 Note: French CIP (French pharmaceutical) is only used with bar codes containing 7 characters. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Set Length L1, Set Length L2, And Set Length L3 Lengths for “Interleaved 2 of 5” can be set from 0 to 255. The length of a code refers to the number of characters (i.e.
Preliminary Draft 3 Appendix C: Bar Code Settings Decoded (Intermec ISCP) Discrete 2 of 5 C.3.16 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”. Standard 2 of 5 Format This parameter allows you to choose a standard format – either Identicon (6 start/stop bars) or Computer Identics (4 start/stop bars). Check Digit Verification The available options for this parameter are Disabled and MOD 10 Check.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) RSS Code (Reduced Space Symbology) Preliminary Draft 3 Format This parameter allows you to set the bar code character format to either ASCII or Numeric. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Length Restriction Refer to “Length Restriction” on page C-14 for details.
Preliminary Draft 3 C.3.19 Appendix C: Bar Code Settings Decoded (Intermec ISCP) Composite Composite Important: To successfully read this type of bar code, the two types of symbologies included in a composite bar code must be enabled. In addition, “Center Bar Code Only” must be disabled (see page C-42). A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners.
Appendix C: Bar Code Settings Decoded (Intermec ISCP) PDF-417 Preliminary Draft 3 Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.3.21 PDF-417 Enabled Set this parameter to on to enable “2D PDF-417”. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.3.22 Micro PDF-417 Enabled Set this parameter to on to enable “2D Micro PDF-417”.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager Codablock Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.3.23 Codablock Enable Codablock A Set this parameter to on to enable “Codablock type A”. Enable Codablock F Set this parameter to on to enable “Codablock type F”. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4 Imager • C.4.
Appendix C: Bar Code Settings Imager Imager Options Preliminary Draft 3 Continuous Scan Mode Setting this parameter to on keeps image capture active and continuously decoding as long as the scanner button is pressed and held down. Center Barcode Only Note: This parameter must be disabled when reading Composite bar codes. When more than one bar code is visible in a single snap shot, this parameter allows you to specify that only the centre image within the imager framing marker be read.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager Imager Advanced Options Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner begins capturing images. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000. A value of 0 disables the target dot. C.4.
Appendix C: Bar Code Settings Imager Imager Advanced Options Preliminary Draft 3 Auto Exposure Important: This parameter value should only be changed by qualified Psion Teklogix personnel. It should be left at the default value: on. Setting this parameter to on allows the imager to make automatic gain, integration and illumination adjustments based on ambient light before capturing the bar code. If the adjustment is insufficient, further adjustments are made automatically before another image is captured.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager Code 39 Note: When decoding multiple bar codes in one image, the value assigned to ‘Decoder Timeout’ should be increased to 200ms/extra bar code after the first. Adaptive Windowing “Adaptive Windowing” is an advanced technique used to speed up bar code recognition in certain applications.
Appendix C: Bar Code Settings Imager Code 128 Preliminary Draft 3 Include Check If this parameter is enabled, the check digit is included with the decoded bar code data. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.4 Code 128 Enabled Set this parameter to on to enable “Code 128. Length Restriction Refer to “Length Restriction” on page C-14 for details.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager EAN 8 Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Addendum Refer to “Addendum” on page 46. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.7 UPC A Enabled Set this parameter to on to enable “UPC A”. Addendum Refer to “Addendum” on page 46. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.
Appendix C: Bar Code Settings Imager Code 93 C.4.9 Preliminary Draft 3 Code 93 Enabled Set this parameter to on to enable “Code 93”. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.10 Codabar Enabled Set this parameter to on to enable “Codabar”. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager RSS Code (Reduced Space Symbology) Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.12 RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.
Appendix C: Bar Code Settings Imager Micro PDF-417 C.4.15 Preliminary Draft 3 Micro PDF-417 Enabled Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager 2D Maxicode Inverse Video Mode Enabling this parameter allows the imager to read inverse bar codes—white symbols presented on a black background. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.18 2D Maxicode Enabled Set this parameter to on to enable “2D Maxicode”. Length Restriction Refer to “Length Restriction” on page C-14 for details.
Appendix C: Bar Code Settings Imager Postal: PostNET Preliminary Draft 3 Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.21 Postal: PostNET Enabled Set this parameter to on to enable “Postal: PostNET”. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.
Preliminary Draft 3 Appendix C: Bar Code Settings Imager Postal: Korean C.4.24 Postal: Korean Enabled Set this parameter to on to enable “Postal: Korean”. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.4.25 Postal: Royal Enabled Set this parameter to on to enable “Postal: Royal”. Length Restriction Refer to “Length Restriction” on page C-14 for details.
Appendix C: Bar Code Settings Non-Decoded Scanners Postal: Canadian Preliminary Draft 3 Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.5 Non-Decoded Scanners Figure C.1 Non-Decoded Scanner Options • Tap on the Scanner drop-down menu, and choose Non-decoded. All the available bar code symbologies for this type of scanner can be selected in this tab.
Preliminary Draft 3 C.5.1 Appendix C: Bar Code Settings Non-Decoded Scanners Options Options • Tap the stylus on the + sign next to Options to display these parameters. Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you doubletap on this parameter, a dialog box is displayed in which you can enter a value from 0 to 3000. A value of 0 (zero) disables the target dot.
Appendix C: Bar Code Settings Non-Decoded Scanners Code 39 Preliminary Draft 3 Include Check If this parameter is enabled, the check digit is included with the decoded bar code data. AIAG Strip If this parameter is enabled, the AIAG data identifier is removed from each decoded Code 39 label. The data identifier occurs in the first position next to the Code 39 start character. It can be a single alphabetic character or a series of numeric digits followed by an alphabetic character.
Preliminary Draft 3 C.5.3 Appendix C: Bar Code Settings Non-Decoded Scanners Code 128 Code 128 Enabled Set this parameter to on to enable “Code 128” or off to disable it. Include Sym Setting “Include Sym” to on causes the group separator(s) and start code contained in this type of bar code to be displayed on the screen. Note: This option is available only when ‘EAN/UCC 128’ is selected. Variations When using Code 128, you can choose the bar code variation the scanner will recognize.
Appendix C: Bar Code Settings Non-Decoded Scanners EAN 13 Preliminary Draft 3 Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.5.4 EAN 13 Enabled Set this parameter to on to enable “EAN 13” or off to disable it. Enable Bookland EAN Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes. Include Country If this parameter is enabled, the country code is included with the decoded bar code data.
Preliminary Draft 3 Appendix C: Bar Code Settings Non-Decoded Scanners EAN 8 Transmit Code ID Char A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.5.5 EAN 8 Enabled Set this parameter to on to enable “EAN 8” or off to disable it.
Appendix C: Bar Code Settings Non-Decoded Scanners UPC E Preliminary Draft 3 Include Check If this parameter is enabled, the check digit will be included with the decoded bar code data. Addendum Important: Before “Addendum” can take effect, the “Short Code” parameter (see page C-55) must be enabled. Refer to “Addendum” on page C-58. Transmit Code ID Char A code ID character identifies the scanned bar code type.
Preliminary Draft 3 Appendix C: Bar Code Settings Non-Decoded Scanners Codabar Refer to “Addendum” on page C-58. Transmit Code ID Char A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.5.8 Codabar Enabled Set this parameter to on to enable “Codabar” or off to disable it.
Appendix C: Bar Code Settings Non-Decoded Scanners Code 11 Preliminary Draft 3 Transmit Code ID Char A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.5.10 Code 11 Enabled Set this parameter to on to enable “Code 11”.
Preliminary Draft 3 Appendix C: Bar Code Settings Non-Decoded Scanners Interleaved 2 of 5 C.5.11 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. MOD 10 Check If this parameter is enabled, the “MOD 10” check digit is calculated. This calculation is the same as the Code 39 MOD 10 check digit. ITF Check If this parameter is enabled, the ITF-14/16 MOD 10 check digit is calculated.
Appendix C: Bar Code Settings Non-Decoded Scanners Discrete 2 of 5 Preliminary Draft 3 Transmit Code ID Char A code ID character identifies the scanned bar code type. In addition to any single character prefix already selected, the code ID character is inserted between the prefix and the decoded symbol. Length Restriction Refer to “Length Restriction” on page C-14 for details. Add/Remove Data Refer to “Add/Remove Data” on page C-14 for details. C.5.
Preliminary Draft 3 Appendix C: Bar Code Settings Non-Decoded Scanners IATA 2 of 5 C.5.14 IATA 2 of 5 Enabled Set this parameter to on to enable “IATA 2 of 5”. MOD 10 Check If this parameter is enabled, the MOD 10 check digit is calculated. ITF Check If this parameter is enabled, the ITF-14/16 MOD 10 check digit is calculated. Include Check If this parameter is enabled, the check digit is included with the decoded bar code data.
Preliminary Draft 3
Preliminary Draft 3
