User's Manual Part 2

Table Of Contents
Chapter 3: Get To Know The iKôn PDA
The LEDs
42 iKôn Rugged PDA (Windows Mobile 6) User Manual
3.6.1 The LEDs
Three LEDs are located on the upper-left side of the unit, just above the display. When you
press the Power button, the LED flashes green to indicate that the unit has been powered up.
The LED table following outlines the behaviour of the LED while the unit is docked in a
charger.
Keep in mind that the application running on the iKôn PDA can dictate how the application
LED operates. Review the documentation provided with your application to determine LED
behaviour.
If the unit is attached to an external power supply, the charge LED (the left-most LED) re-
flects the battery charge status.
3.7 Audio Indicators
The audio speaker provides a variety of sounds when a key is pressed, a keyboard character
is rejected, scan input is accepted or rejected, an operators entry does not match in a match
field or the battery is low. To specify how you want your iKôn PDA to respond under
various conditions, refer to “Sounds” on page 105.
Table 3.1 Function Of iKôn PDA LEDs
LED Function
Green Charge LED
(left-most LED)
Charge indicator. See the table below for descriptions of Charge
LED behaviour.
Yellow Application LED
(centre LED)
Application LED. This LEDs behaviour is application dependent.
Blue Radio Power LED
(right-most LED)
Radio power indicator.
Table 3.2 iKôn PDA Charge LED Behaviour
LED Behaviour Charge Status
Solid Green Charge complete
Fast Blinking Green Charge in progress. Battery charged to less than 80% capacity.
Slow Blinking Green Battery charged to greater than 80% capacity.
Solid Red Temperature outside charge range (0° C to 50° C)
Blinking Red Battery is not charging. Battery fault.

Summary of content (75 pages)