Chapter 5: Configuration IPv6 Support 2. Tap the Properties button. The Partition Properties dialog appears. 3. Tap the Mount button. The partition is mounted. The asterisk appears next to its name in the partitions list. The Partition Properties dialog has buttons for additional functions. Partitions can be defragmented, and their file structure can be scanned. 5.
Chapter 5: Configuration Teklogix Imagers 5.13 Teklogix Imagers The Teklogix Imagers program is used to read bar codes and capture images. The program manages preset groups of settings. It does not manage imager settings individually. Custom presets—groups of imager settings—are created, modified, deleted, and selected for use, through Teklogix Imagers. For detailed information on these presets, please refer to the Psion Teklogix Imaging Services SDK Developers Guide (PN 8100153). 5.13.
Chapter 5: Configuration Configuring The Image Capture Presets The following window opens: This window lists all the presets, both the predefined and the custom ones. Presets are identified as follows: • Predefined presets are marked as read-only. • Custom presets are marked as read and write. • One preset—either predefined or custom—is marked as active. When you have completed all the changes, do one of the following: • • 5.13.1.
Chapter 5: Configuration Configuring The Image Capture Presets 2. Click Activate. 5.13.1.3 Viewing A Preset To view the parameter settings in a preset, do the following: 1. Select a preset. 2. Click View. The following window opens: 3. Expand one of the lists to view the parameter settings. 4. Click the OK, or the Close, button to exit. 5.13.1.4 Creating A Custom Preset Custom presets are created, modified and deleted through Teklogix Imagers.
Chapter 5: Configuration Configuring The Image Capture Presets A window similar to the following opens: 3. Type the name of the new preset in the dialog box. 4. When you have completed all the changes, do one of the following: • Click OK to exit and save the changes, or • Click the Close button to exit without saving the changes. 5. The preset list is displayed; the new custom preset is at the end of the list. It is marked as read and write. 5.13.1.
Chapter 5: Configuration Configuring The Image Capture Presets 4. Scroll through the parameter list until you reach the parameter that you want to change. 5. For a parameter that can take a range of values: i. Select the parameter and then press the [SPACE] key, or double-click the parameter. ii. A dialog box —containing the valid range of values for the parameter and the current setting—similar to the following opens: iii. Type the new value for the parameter into the box. 6.
Chapter 5: Configuration Configuring The Bar Code Decoding Camera Presets The following window opens: 3. Do one of the following: • Click Yes to delete the custom preset and exit to the preset list, or • Click No to exit to the preset list without deleting the custom preset. 5.13.2 Configuring The Bar Code Decoding Camera Presets To configure the bar code decoding camera presets, open the dialog box as follows: • In Control Panel, select Teklogix Imagers and then click the Barcoding tab.
Chapter 5: Configuration Configuring The Bar Code Decoding Camera Presets • Predefined presets are marked as read-only. • Custom presets are marked as read and write. • One preset—either predefined or custom—is marked as active. When you have completed all the changes, do one of the following: • • 5.13.2.1 Click OK to exit and save the changes, or Click the Close button to exit without saving the changes.
Chapter 5: Configuration Configuring The Bar Code Decoding Camera Presets The following window opens: 3. Expand one of the lists to view the parameter settings. 4. Click the OK or the Close button to exit. 5.13.2.4 Creating A Custom Preset Custom presets are created, modified and deleted through Teklogix Imagers. A new custom preset is created by modifying a preset—either a predefined preset or an existing custom preset. To create a custom preset do the following: 1. Select a preset. 2. Click Add.
Chapter 5: Configuration Configuring The Bar Code Decoding Camera Presets 5. The preset list is displayed; the new custom preset is at the end of the list. It is marked as read and write. 5.13.2.5 Modifying A Custom Preset The parameter values in a custom preset can be modified. It is recommended that very few changes be made to a custom preset. To ensure that it will work reliably, it should be as close as possible to the original predefined preset. To change a parameter value do the following: 1.
Chapter 5: Configuration Configuring The Bar Code Decoding Symbology Presets 6. For a parameter that toggles between two values: • Select the parameter and then press the [SPACE] key, or • Double-click the parameter. 7. When you have completed all the changes, do one of the following: • Click OK to exit to the parameter list and save the changes, or • Click the Close button to exit to the parameter list without saving the changes. 8.
Chapter 5: Configuration Configuring The Bar Code Decoding Symbology Presets The following window opens: This window lists all the presets, both the predefined and the custom ones. Presets are identified as follows: • Predefined presets are marked as read-only. • Custom presets are marked as read and write. • One preset—either predefined or custom—is marked as active. When you have completed all the changes, do one of the following: • • 5.13.3.
Chapter 5: Configuration Configuring The Bar Code Decoding Symbology Presets 2. Click Activate. 5.13.3.3 Viewing A Preset To view the parameter settings in a preset, do the following: 1. Select a preset. 2. Click View. The following window opens: 3. Expand one of the lists to view the parameter settings. 4. Click the OK or the Close button to exit. 5.13.3.4 Creating A Custom Preset Custom presets are created, modified and deleted through Teklogix Imagers.
Chapter 5: Configuration Configuring The Bar Code Decoding Symbology Presets 3. Type the name of the new preset in the dialog box. 4. When you have completed all the changes, do one of the following: • Click OK to exit and save the changes, or • Click the Close button to exit without saving the changes. 5. The preset list is displayed; the new custom preset is at the end of the list. It is marked as read and write. 5.13.3.
Chapter 5: Configuration Configuring The Bar Code Decoding Symbology Presets i. Select the parameter and then press the [SPACE] key, or double-click the parameter. ii. A dialog box —containing the valid range of values for the parameter and the current setting—similar to the following opens: iii. Type the new value for the parameter into the box. 6. For a parameter that toggles between two values: • Select the parameter and then press the [SPACE] key, or • Double-click the parameter. 7.
Chapter 5: Configuration Manipulating Bar Code Data The following window opens: 3. Do one of the following: • Click Yes to delete the custom preset and exit to the preset list, or • Click No to exit to the preset list without deleting the custom preset. 5.13.3.7 Working With The My Default Preset The My Default symbology preset is synchronized with the symbologies defined by the Teklogix Scanners program in Control Panel.
Chapter 5: Configuration Manipulating Bar Code Data The following window opens: 5.13.4.1 Modifying A Bar Code Setting The rules for manipulating data from selected bar code symbologies can be modified. To change the settings for a symbology do the following: 1. Expand the selected bar code symbology to view the parameter settings. A list similar to the following is displayed: 2. For a parameter that can take a range of values: i.
Chapter 5: Configuration Configuring Translation Rules ii. A dialog box —containing the valid range of values for the parameter and the current setting—similar to the following opens: iii. Type the new value for the parameter into the box. 3. For a parameter that takes a single character: i. Select the parameter and then press the [SPACE] key, or double-click the parameter. ii. The following dialog box opens: iii. Press the selected key on the keyboard. 4.
Chapter 5: Configuration Obtaining Information On the Imaging System The following window opens: For instructions on adding, editing, and removing translation rules, refer to “Translations” on page 206. 5.13.6 Obtaining Information On the Imaging System To obtain information on the imaging system, open the dialog box as follows: • In Control Panel, select Teklogix Imagers and then click the About tab. Ikôn Rugged PDA (Windows CE 5.
Chapter 5: Configuration Configuring File Locations For Captured Images The following window opens: This window displays the following: • The imager model. • The version number of the imaging driver installed on the Ikôn. • The version number of the firmware installed on the imager. To close the window either click OK, or click the Close button. 5.13.
Chapter 5: Configuration Configuring File Locations For Captured Images The following window opens: To define the location for saving imager files: • Click File Location. The following window opens: • • Select the folder name and the file type. Enter the file name. When you have completed all the changes, do one of the following: - Click OK to exit to the preset list and save the changes, or Ikôn Rugged PDA (Windows CE 5.
Chapter 5: Configuration Configuring Triggers - Click the Close button to exit to the preset list without saving the changes. 5.13.8 Configuring Triggers 5.13.8.1 Viewing The Trigger Configuration The scan button on the Ikôn is configured using the Manage Triggers program in Control Panel. The Teklogix Imagers program has a shortcut to Manage Triggers. To navigate to this shortcut open the dialog box as follows: 1. In Control Panel, select Teklogix Imagers and then click the Advanced tab.
Chapter 5: Configuration Scanner Settings The following Manage Triggers window opens displaying the triggers that are available to imaging applications: 3. To view all the triggers and the hardware devices that are configured to use them, select Show all modules. 5.13.8.2 Adding, Editing, And Removing Triggers For instruction on adding, editing, and removing triggers, refer to “Manage Triggers” on page 106. 5.
Chapter 5: Configuration Bar Codes Scanner Figure 5.13 Teklogix Scanners Icon For a listing of available scanners and their specifications, please refer to Chapter 7: “Specifications”. 5.14.1 Bar Codes 5.14.1.1 Scanner The drop-down menu to the right of the Scanner option allows you to choose from one of the following scanner types used with your Ikôn: Decoded (internal), Decoded (HHP), Decoded (ISCP), and Imager.
Chapter 5: Configuration Bar Codes Restoring Default Settings Important: To improve the decode speed and performance, enable only those codes that are required by the application. Keep in mind that some bar code types are only available when an internal imaging scanner is installed. All internal scanners can be configured using the Barcode dialog boxes. 5.14.1.
Chapter 5: Configuration Decoded (Internal) Scanners Options • Press and hold the stylus on the parameter you want to reset. • Choose Default parameter to reset the parameter to the default setting. 5.14.2 Decoded (Internal) Scanners • 5.14.2.1 Tap on the Scanner drop-down menu, and choose Decoded (internal). Options Note: Some options are available only for specific scanners. Refer to the option names in this section for scanner model identification. 164 Ikôn Rugged PDA (Windows CE 5.
Chapter 5: Configuration Decoded (Internal) Scanners Decoded (Internal) Advanced Options Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you doubletap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Chapter 5: Configuration Decoded (Internal) Scanners Parameter Scanning Setting this parameter to on enables decoding of parameter bar codes. Linear Security Level This parameter allows you to select the security level appropriate for your bar code quality. There are four levels of decode security for linear code types (e.g., Code 39, Interleaved 2 of 5). Higher security levels should be selected for decreasing levels of bar code quality. As security levels increase, the scanner’s decode speed decreases.
Chapter 5: Configuration Decoded (Internal) Scanners Decoded (Internal) 2D Scanning Options When this parameter is enabled, a bar code must be successfully scanned in both directions (forward and reverse) before being decoded. 5.14.2.
Chapter 5: Configuration Decoded (Internal) Scanners Code 39 Delete Char Set ECIs Setting this parameter to on enables the scanner to delete any escape sequences representing Character Set ECIs—Extended Channel Interpretations (also known as GLIs)—from its buffer before transmission. When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417 bar codes containing Character Set ECIs, even when the ECI Protocol is disabled.
Chapter 5: Configuration Decoded (Internal) Scanners When this parameter is enabled, the prefix character “A” is added to all “Code 32” bar codes. Set Length L1 And Set Length L2 Lengths for “Code 39” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 5: Configuration Decoded (Internal) Scanners Decode Performance If this parameter is enabled, one of three decode levels can be chosen in the Decode Performance Level parameter. Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 39 symbols. Increasing the performance level reduces the amount of required bar code orientation—this is useful when scanning very long and/or truncated bar codes.
Chapter 5: Configuration Decoded (Internal) Scanners Code 128 5.14.2.6 Code 128 Enabled Set this parameter to on to enable “Code 128”. Enable GS1-128/GS1 US Previously UPC/EAN and UCC, these types of bar codes include group separators and start codes. Enable ISBT 128 To successfully scan this variation, “Enable ISBT 128” must be set to on. Decode Performance If this parameter is set to on, one of three decode levels assigned to the Decode Performance Level parameter can be selected. Decode Perf.
Chapter 5: Configuration Decoded (Internal) Scanners EAN 8 Suffix Char This character, if non-zero, is added after a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Strip Leading This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added.
Chapter 5: Configuration Decoded (Internal) Scanners UPC E System Char—system character transmitted with the data, Country Code and System Char—both the country code (“0” for USA) and system character are transmitted with the data, or None—no preamble is transmitted. The lead-in characters are considered part of the symbol. Prefix/Suffix See “Prefix/Suffix” on page 171. 5.14.2.10 UPC E Enabled UPC-E Set this parameter to on to allow “UPC E” bar code scans.
Chapter 5: Configuration Decoded (Internal) Scanners UPC/EAN Shared Settings Conv. UPC-E1 To UPC-A This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Prefix/Suffix Refer to “Prefix/Suffix” on page 171. 5.14.2.11 UPC/EAN Shared Settings The parameters you set here are a shared across all available UPC and EAN bar codes.
Chapter 5: Configuration Decoded (Internal) Scanners Code 93 are successfully decoded within one laser scan. This option should be enabled when bar codes are in proximity to each other. 2D UPC Half Block Stitching Setting this parameter to on enables “UPC Half Block Stitching” for the omnidirectional scanner engine only. 5.14.2.12 Code 93 Enabled Set this parameter to on to enable “Code 93”, or OFF to disable it.
Chapter 5: Configuration Decoded (Internal) Scanners MSI Plessey Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 5 to 55.
Chapter 5: Configuration Decoded (Internal) Scanners Interleaved 2 of 5 If this parameter is set to One, it is assumed that the last digit is a check digit. If “Check Digits” is set to Two, it is assumed that the last two digits are check digits. Note: If Two check digits is selected, an MSI Plessey “Check Digit Algorithm: must also be selected. See below for details. Transmit Check Digit If this parameter is enabled, the check digit is included with the bar code data.
Chapter 5: Configuration Decoded (Internal) Scanners Discrete 2 of 5 Transmit Check Digit If this parameter is enabled, the check digit is included with the bar code data. Convert To EAN 13 If this parameter is enabled, the I 2 of 5 bar code is converted to EAN 13. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.2.16 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”.
Chapter 5: Configuration Decoded (Internal) Scanners Composite Enable RSS Limited “RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read omni-directionally.
Chapter 5: Configuration Decoded (Internal) Scanners Micro PDF-417 5.14.2.20 Micro PDF-417 Enable Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417. Code 128 Emulation When this parameter is enabled, the scanner transmits data from certain Micro PDF-417 symbols as if it was encoded in Code 128 symbols.
Chapter 5: Configuration Decoded (ISCP) Decoded (ISCP) Options 5.14.3 Decoded (ISCP) • 5.14.3.1 Tap on the Scanner drop-down menu, and choose Decoded (ISCP). Decoded (ISCP) Options Laser On Time The value assigned to this parameter determines how long the laser will remain on when the scan button or trigger is pressed. Double-tapping on this parameter displays a dialog box in which you can enter a value between 1 and 10 seconds. 5.14.3.
Chapter 5: Configuration Decoded (ISCP) Code 39 Low Power Timeout To extend laser life, you can select the length of time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a successful decode restores normal blinking. When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec, 1 min, 2 min, or 3 min.
Chapter 5: Configuration Decoded (ISCP) Code 128 Start/Stop Transmit Setting this parameter to on enables the transmission of start and stop characters, which are usually not transmitted. Code 39 can start and end with either a * or a $ character (see also the next parameter). Accepted Start Char This parameter allows the user the option of using one of the two start/stop characters or both ($ char, * char, $ and * char).
Chapter 5: Configuration Decoded (ISCP) GS1-128 Identifier “GS1-128 Identifier” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed. By default, this identifier is transmitted if EAN 128 is enabled. GTIN Compliant GTIN (global trade item number) processing transmits EAN 128 as the 14-character EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology. Important: When EAN 128 and GTIN processing are both activated, it is not possible to read normal EAN 128 Codes.
Chapter 5: Configuration Decoded (ISCP) EAN 13 Settings Check Digit Verification The available options for this parameter are Disabled or French CIP. This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Note: French CIP (French pharmaceutical) is only used with bar codes containing 7 characters.
Chapter 5: Configuration Decoded (ISCP) UPC A Settings Convert To EAN 13 If this parameter is enabled, an EAN 8 bar code is converted to EAN 13. Prefix/Suffix Refer to “Prefix/Suffix” on page 171. 5.14.3.7 UPC A Settings Enabled Set this parameter to on to enable “UPC A” bar code scanning recognition. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled.
Chapter 5: Configuration Decoded (ISCP) UPC/EAN Shared Settings Convert To UPC-A This parameter converts UPC E (zero suppressed) decoded data to UPC A format before transmission. After conversion, data follows UPC A format and is affected by UPC A programming selections (e.g. Check Digit). Prefix/Suffix Refer to “Prefix/Suffix” on page 171. 5.14.3.9 UPC/EAN Shared Settings The setting assigned to the “Addendum” parameter associated with this option is shared across all UPC and EAN bar codes.
Chapter 5: Configuration Decoded (ISCP) Code 93 5.14.3.10 Code 93 Enabled Set this parameter to on to enable “Code 93”. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.3.11 Codabar Enabled Set this parameter to on to enable “Codabar”.
Chapter 5: Configuration Decoded (ISCP) MSI Plessey Set Length L1, Set Length L2, And Set Length L3 Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner. Length Mode You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Chapter 5: Configuration Decoded (ISCP) Code 11 Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.3.13 Code 11 Enabled Set this parameter to on to enable “Code 11”. Check Digit Verification The available options for this parameter are MOD 10 Check and Double MOD 10 Check.This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Chapter 5: Configuration Decoded (ISCP) Matrix 2 of 5 Note: French CIP (French pharmaceutical) is only used with bar codes containing 7 characters. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Set Length L1, Set Length L2, And Set Length L3 Lengths for “Interleaved 2 of 5” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 5: Configuration Decoded (ISCP) Telepen Check Digit Verification The available options for this parameter are Disabled and MOD 10 Check. “Check Digit Verification” uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the data is not transmitted. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled.
Chapter 5: Configuration Decoded (ISCP) RSS Code (Reduced Space Symbology) 5.14.3.18 RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability. Enable RSS-14 RSS-14 code can be either purely linear or split in half with one half stacked on top of the other half. Stacking the code reduces the bar code length, and providing the nominal height of the code is maintained, it can be omni-directionally scanned.
Chapter 5: Configuration Decoded (ISCP) Codablock If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted with one of the following prefixes: ]C1 if the first codeword is 903-907, 912, 914, 915 ]C2 if the first codeword is 908 or 909 ]C0 if the first codeword is 910 or 911 If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes: ]L3 if the first codeword is 903-907, 912, 914, 915 ]L4 if the first codeword is 908 or 909
Chapter 5: Configuration Imager Imager Options 5.14.4 Imager • 5.14.4.1 Tap on the Scanner drop-down menu, and choose Imager. Imager Options TekImager Enabled Setting this option to on enables the imager installed in your Ikôn. Continuous Scan Mode Setting this parameter to on keeps image capture active and continuously decoding as long as the scanner button is pressed and held down. Center Bar Code Only Note: This parameter must be disabled when reading Composite bar codes.
Chapter 5: Configuration Imager Imager Advanced Options Barcodes Must Decode This parameter specifies the minimum number of bar codes that the imager must decode in order to report success. Note: This number must be less than the number of bar codes assigned to “Max Number Barcodes”. The driver validates and reassigns the value if necessary. Window Width “Window Width” determines the width of the captured image in pixels.
Chapter 5: Configuration Imager Min Scan Duration This parameter defines the minimum amount of time in seconds that the imager will scan when the trigger is pressed and held down without successful decode. Note: The actual scan duration when the trigger is pressed relies on the value assigned to “Captures Per HW Trigger”, below.
Chapter 5: Configuration Imager Max Gain, Max Integration And Max Illumination Important: These parameter values should only be changed by qualified Psion Teklogix personnel. These parameters represent internal values used by the 2D imager. The “Auto Exposure” parameter automatically adjusts the Max Gain, Max Integration and Max Illumination parameters to produce the best bar code read. Keep in mind that “Auto Exposure” must be set to on in order for these parameter values to be automatically adjusted.
Chapter 5: Configuration Imager Code 39 Settings 5.14.4.3 Code 39 Settings Enabled Set this parameter to on to enable “Code 39”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.4 Code 128 Settings Enabled Set this parameter to on to enable “Code 128”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.5 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Addendum An addendum is a separate bar code, supplementary to the main bar code.
Chapter 5: Configuration Imager EAN 8 5.14.4.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Addendum Refer to “Addendum” on page 199. Prefix/Suffix Refer to “Prefix/Suffix” on page 171. 5.14.4.7 UPC A Enabled Set this parameter to on to enable “UPC A”. Addendum Refer to “Addendum” on page 199. Prefix/Suffix Refer to “Prefix/Suffix” on page 171. 5.14.4.8 UPC E Enabled Set this parameter to on to enable “UPC E”. Addendum Refer to “Addendum” on page 199.
Chapter 5: Configuration Imager Codabar 5.14.4.10 Codabar Enabled Set this parameter to on to enable “Codabar”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.11 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.12 RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability.
Chapter 5: Configuration Imager Micro PDF-417 5.14.4.15 Micro PDF-417 Enable Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.16 2D Data Matrix Enable Set this parameter to on to enable “Data Matrix”.
Chapter 5: Configuration Imager Postal: PlaNET Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.20 Postal: PlaNET Enabled Set this parameter to on to enable “Postal: PlaNET”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.21 Postal: PostNET Enabled Set this parameter to on to enable “Postal: PostNET”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.
Chapter 5: Configuration Options Postal: Royal Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.4.25 Postal: Royal Enabled Set this parameter to on to enable “Postal: Royal”. Field Size/Chars Refer to “Field Size/Chars” on page 170 for details. 5.14.5 Options This menu allows you to tailor the double-click parameters and the display options associated with your scanner. 5.14.5.
Chapter 5: Configuration Options initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, doubleclicking the scanner trigger inserts the “Click Data” value rather than initiating a scan. Click Data For both integrated and external scanners, this parameter determines which character is sent to the application installed in your Ikôn following a double-click. A dialog box appears, asking that you press the key you want to insert.
Chapter 5: Configuration Translations Scan Log File If this parameter is enabled, the input barcode and the modified/translated output bar code are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if the “Scan Log File” is enabled, there is a slight performance effect when performing multiple scans since the log file is written to persistent storage. 5.14.6 Translations The Translations menu allows you to define up to 10 cases, each consisting of up to 10 rules in sequential order.
Chapter 5: Configuration Translations • Tap on the No rule drop-down menu to display the rules. When you choose a rule, an associated screen is displayed in which you can define the rule. 5.14.6.1 Case Rules The case rules are defined as follows: • • • • • No rule—ignored. Search and replace—replaces all instances of the match string. (Note that this rule cannot fail.) Match at index—matches the match string at a specified index.
Chapter 5: Configuration Translations • • Add barcode prefix/suffix—adds a global prefix or suffix. Verify barcode size—verifies the bar code size. This rule should generally be assigned first, before creating subsequent rules. Note: Keep in mind that the effects of previously applied rules must be taken into account when creating subsequent rules. For example, if the bar code size is important, it should be checked before any rules that might change the size are applied.
6 PERIPHERAL DEVICES & ACCESSORIES 6.1 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . 6.1.1 Attaching The Handstrap With Tether (Model No. CH6021) 6.1.2 Attaching The Tether (Model No. CH6020) . . . . . . . . . 6.1.3 Protective Carrying Cases . . . . . . . . . . . . . . . . . . 6.2 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 . 211 .216 .219 .219 6.
6.6.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6.5.1 The Ikôn Charge Indicator LED Stays Off. . . . . . . . . . . . . 6.6.5.2 The Ikôn Charge Indicator LED Is Fast Flashing Green.. . . . . 6.6.5.3 Green LED OFF When Connected To A Network. . . . . . . . 6.6.5.4 Yellow LED OFF When Connected To A 100Base-T Network. . 6.6.5.5 Powered Adaptor LED Stays Off. . . . . . . . . . . . . . . . . 6.7 AC Wall Adaptor: Model No. PS1050 - G1 . . . . . . . . . . . . . . . . . . . . .
Chapter 6: Peripheral Devices & Accessories Carrying Accessories 6.1 Carrying Accessories There are a variety of carrying accessories to help the operator work safely and comfortably with the Ikôn. Table 6.
Chapter 6: Peripheral Devices & Accessories Attaching The Handstrap With Tether (Model No. CH6021) Figure 6.1 Attaching The Handstrap BACK OF UNIT BOTTOM OF UNIT Handstrap Anchors Elastic Stylus Holder Velcro Tab Velcro Pad (Underneath) Eyelet for Tether Bracket Screws M2 x 4 Buckle Leather Velcro Elastic Strap Velcro Pad Plastic Loop 212 Ikôn Rugged PDA (Windows CE 5.
Chapter 6: Peripheral Devices & Accessories Attaching The Handstrap With Tether (Model No. CH6021) 1. Attach the handstrap to the Ikôn by looping the Velcro tab around the pin and adhering the tab to the Velcro pad. 2. Remove the bracket and screws from the Ikôn. Ikôn Rugged PDA (Windows CE 5.
Chapter 6: Peripheral Devices & Accessories Attaching The Handstrap With Tether (Model No. CH6021) 3. Slide the bracket through the plastic loop on the handstrap and install the screws. 4. Adjust the handstrap by pulling up the Velcro tab and readjusting to your hand as needed. Attaching The Stylus Tether To The Handstrap The stylus tether can be attached to the handstrap at the back of the Ikôn. 1. If not assembled, thread the tether cord through the stylus as shown, pulling the cord tight.
Chapter 6: Peripheral Devices & Accessories Attaching The Handstrap With Tether (Model No. CH6021) 2. Thread the tether through the eyelet on the strap. 3. Pass the stylus through the tether loop and pull the tether snug. 4. Slip the stylus into the elastic holder, and you’re finished. Ikôn Rugged PDA (Windows CE 5.
Chapter 6: Peripheral Devices & Accessories Attaching The Tether (Model No. CH6020) 6.1.2 Attaching The Tether (Model No. CH6020) The tether can be installed to the back of the Ikôn to provide a secure means for attaching the stylus to the PDA. Figure 6.2 Attaching The Tether BACK OF UNIT Tether Pin Velcro Tab Eyelet for Tether Elastic Stylus Holder Velcro Pad 216 Ikôn Rugged PDA (Windows CE 5.
Chapter 6: Peripheral Devices & Accessories Attaching The Tether (Model No. CH6020) Attaching The Velcro Retainer Attach the retainer to the Ikôn by looping the Velcro tab around the pin and adhering the tab to the Velcro pad. Attaching The Stylus Tether To The Retainer 1. If not assembled, thread the tether cord through the stylus as shown, pulling the cord tight. Ikôn Rugged PDA (Windows CE 5.
Chapter 6: Peripheral Devices & Accessories Attaching The Tether (Model No. CH6020) 2. Thread the tether through the eyelet on the strap. 3. Pass the stylus through the tether loop and pull the tether snug. 4. Slip the stylus into the elastic holder, and you’re finished. 218 Ikôn Rugged PDA (Windows CE 5.
Chapter 6: Peripheral Devices & Accessories Protective Carrying Cases 6.1.3 Protective Carrying Cases Two leather carrying cases are available for Ikôns to shield it from damage. The Model No. CH6090 pouch fully covers the Ikôn; the Model No. CH6095 case provides full access to the Ikôn screen and keyboard for functionality. 6.2 The Battery The Ikôn operates on a 5000 mAh Lithium Ion battery pack—Model No. CH3000. Note: Review Chapter 7: “Specifications” for detailed information.
Chapter 6: Peripheral Devices & Accessories Important Safety Instructions • 6.4.1 Quad Docking Station – Model No. CH4004 (see page 227). Important Safety Instructions • • • • • • • • • • • Before using the AC adaptor, CH4000 Desktop Docking Station, or CH4004 Quad Docking Station, read all instructions and markings on the housing. Use the AC adaptor, batteries, and other attachments recommended or sold by Psion Teklogix.
Chapter 6: Peripheral Devices & Accessories Installation: Chargers And Docking Stations • • 6.4.2 Do not use a docking station if after an overnight charge, the battery feels warmer than the charger housing. The dock should be inspected by qualified service personnel. Do not use a docking station if the battery, while charging, becomes more than lukewarm. Installation: Chargers And Docking Stations When installing a charger or docking station, consider the following guidelines.
Chapter 6: Peripheral Devices & Accessories CH4000 Desktop Docking Station 6.5 CH4000 Desktop Docking Station Important: The CH4000 desktop docking station is shipped with its own quick reference guide. It is critical that it be reviewed for additional information and updates. Important: To preserve battery integrity, the desktop docking station will proceed with a charge only when the battery temperature falls between 0°C and 40°C (32°F to 104°F).
Chapter 6: Peripheral Devices & Accessories Charging The Spare Battery 6.5.3.2 Charging The Spare Battery Important: Do not store spare batteries in a charger for more than 72 hours. Doing so may damage the battery or reduce its charge capacity. • Install the battery in the rear slot of the CH4000 with the connector facing to the right. Slide the battery in and down to mate the connector. • The CH4000 spare battery LED lights up immediately. During charge the LED will be flashing green.
Chapter 6: Peripheral Devices & Accessories Cleaning The CH4000 Figure 6.5 CH4000 Desktop Docking Station Rear View Sliding Door Type B USB Port Type A USB Port Sliding Door DC Jack DC Jack Linking An Ikôn To A PC The desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable is included with your docking station.
Chapter 6: Peripheral Devices & Accessories Troubleshooting • • 6.5.5 Use only mild detergent or soapy water on a slightly damp cloth to clean the CH4000. Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions. To clean ink marks from the label, use isopropyl alcohol. Troubleshooting 6.5.5.
Chapter 6: Peripheral Devices & Accessories Operation 6.6.3 Operation 6.6.3.1 Charging The Ikôn Battery Insert the adaptor's DC power MINI FIT JR plug into the CH4004 rear DC input receptacle. The adaptor LED should be ON when powered from the mains. The CH4004 supplies DC power to enable the Ikôn internal fast charger. Normally, it takes 2.5 to 3.0 hours to charge the Ikôn 5000 mAh battery. • During charge the Ikôn LED will be a slow flashing green.
Chapter 6: Peripheral Devices & Accessories Troubleshooting 6.6.5 Troubleshooting 6.6.5.1 The Ikôn Charge Indicator LED Stays Off. When an Ikôn is docked into a powered CH4004 and its charge indicator LED stays off, there could be a problem with the Ikôn or with the docking station. Use an Ikôn with a properly functioning charge indicator to isolate the problem. 6.6.5.2 The Ikôn Charge Indicator LED Is Fast Flashing Green.
Chapter 6: Peripheral Devices & Accessories Automotive Power Adaptor: Model No. CH3050 Figure 6.8 AC Wall Adaptor Plugs Universal AC Power Supply Adaptor Plugs DC Power Plugs • • • 6.8 Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug into the Universal AC power supply, snapping it into place. These two pieces, coupled together, are referred to as an AC wall adaptor.
Chapter 6: Peripheral Devices & Accessories The CH1000 Non-Powered Vehicle Cradle Figure 6.9 CH3050 Automotive Power Adaptor Automotive Power Adaptor Plug DC Power Plug • • 6.9 Insert the DC power plug into the DC IN port at the base of the Ikôn. Insert the automotive power adaptor plug into automotive power outlet in your vehicle. The CH1000 Non-Powered Vehicle Cradle Important: The CH1000 vehicle cradle is shipped with its own quick reference guide.
Chapter 6: Peripheral Devices & Accessories Important Instructions Figure 6.10 CH1000 Vehicle Cradle Cable Tidy Restraining Mechanisms Stylus Well Cable Pass-thru 6.9.1 Important Instructions The CH1000 storage temperature is -40°C to +70°C (-40°F to 158°F). Operating humidity and temperature is 5 - 95% non-condensing and -30°C to 60°C (-22°F to 140°F). 6.9.2 Vehicle Cradle Operation 6.9.2.1 Operator Controls The vehicle cradle has no operator controls or power switch. 6.9.2.
Chapter 6: Peripheral Devices & Accessories Removing The Ikôn From The Vehicle Cradle 6.9.2.4 Removing The Ikôn From The Vehicle Cradle When removing the Ikôn, apply slight pressure to the rear and pull upwards. The rear-first motion will assist in disengaging the rear restraining mechanism. 6.9.3 CH1000 Vehicle Cradle Mounting Recommendations Important: Before mounting a vehicle cradle in a vehicle, there are a number of operator safety issues that require careful attention.
Chapter 6: Peripheral Devices & Accessories Cleaning The CH1000 Vehicle Cradle • • Ensure the mounting has the capacity to hold the cradle and the Ikôn. Cradle plus Ikôn weight is approximately 1kg (2.2 lb.). Psion Teklogix has recommended and approved mounts—consult Customer Service for information. Figure 6.11 Removing The RAM Mount Interface To accommodate the service loop of the power cable, leave a 10.2 cm (4 in.) clearance at the bottom of the vehicle cradle. Leave a 17.8 cm (7 in.
Chapter 6: Peripheral Devices & Accessories The CH1005A Powered Vehicle Cradle • • 6.10 Use only mild detergent or soapy water on a slightly damp cloth to clean the CH1000. Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions. To clean ink marks from the label, use isopropyl alcohol.
Chapter 6: Peripheral Devices & Accessories Mounting Template If you wish to custom mount the vehicle cradle to a surface other than the recommended RAM-B, please take the following precautions: • • • • When installing the cradle, ensure the driver’s view is not obstructed. Install cradles so as not to obstruct vehicle safety features, i.e. airbags, seat belts, etc. Ensure cradle is secured to the vehicle in a safe location. Injury may result otherwise.
Chapter 6: Peripheral Devices & Accessories Wiring Vehicle Power To The Cradle Warning: Applying a voltage above 36VDC or reversing polarity may result in permanent damage to the vehicle cradle power section and will void the product warranty. For safety reasons, disconnect the vehicle cradle power cable when the vehicle battery is being charged by an source other than the vehicle alternator. 6.10.3.
Chapter 6: Peripheral Devices & Accessories Using The Vehicle Cradle Peripherals such as scanners, printers, GPS, etc., may be used with the Ikôn and the cradle. Check with Psion Teklogix if there is any compatibility issue with the device you want to use with the Ikôn and the cradle. 6.10.5 Using The Vehicle Cradle If your Ikôn is equipped with a shoulder strap or protective cover, these accessories need to be removed before installing the unit in a vehicle cradle.
Chapter 6: Peripheral Devices & Accessories Scanning Techniques Scanner/imagers available for your Ikôn include: 1D Laser SE955, 1D Imager EV15, and the 2D Imager SX5400. It is critical that you review the safety information in the Ikôn Rugged PDA Regulatory & Warranty Guide, PN 8000148, before proceeding. 6.11.1 Scanning Techniques • • Hold the scanner at an angle. Do not hold it perpendicular to the bar code. Do not hold the scanner directly over the bar code.
Chapter 6: Peripheral Devices & Accessories Operating One Dimensional (1D) Laser Scanners • • Is the laser beam scanning across the bar code? Once the scan beam has stopped, check the scanner window for dirt or fogging. 6.11.3 Operating One Dimensional (1D) Laser Scanners • Turn the Ikôn on. Wait until the unit has booted up completely.
Chapter 6: Peripheral Devices & Accessories Bluetooth Peripherals Important: Keep in mind that the imager scanner is a camera, and the LED illumination is a flash. Glare can be an issue on reflective media such as plastic coated bar codes, just as glare is an issue for photographers. When pointing at a shiny surface, either shift the bar code to the side or top, or angle the bar code so that the glare reflects away from the imager scanner.
Chapter 6: Peripheral Devices & Accessories Bluetooth Peripherals Refer to “Bluetooth Setup” on page 111 for information about setting up your Bluetooth devices for communication. In addition, review the manual shipped with your Bluetooth device to determine the method used to pair with the Ikôn host. 246 Ikôn Rugged PDA (Windows CE 5.
7 SPECIFICATIONS 7.1 Ikôn Rugged PDA Specifications (Model No. 7505) 7.1.1 Hardware . . . . . . . . . . . . . . . . . . 7.1.2 Software . . . . . . . . . . . . . . . . . . 7.1.3 Wireless Communication. . . . . . . . . . 7.1.4 Bar Code Applications (optional) . . . . . 7.1.5 Camera (optional) . . . . . . . . . . . . . 7.1.6 Accessories . . . . . . . . . . . . . . . . . 7.1.7 Approvals. . . . . . . . . . . . . . . . . . 7.2 Radio Specifications . . . . . . . . . . . . . . . . . 7.2.1 802.11b/g WLAN Radio . .
Chapter 7: Specifications Ikôn Rugged PDA Specifications (Model No. 7505) Note: Performance specifications are nominal & subject to change without notice. 7.1 Ikôn Rugged PDA Specifications (Model No. 7505) 7.1.1 Hardware Physical Dimensions • 16 cm x 8.1 cm x 4.5 cm (6.3 in. x 3.2 in. x 1.8 in.). Weight (with battery pack) • 450 g (1.0 lbs.) with battery pack. User Interface Color Touchscreen Display: 9.39 cm (3.7 in.) diagonal. Full VGA 480x640 resolution. Transflective, portrait mode TFT.
Chapter 7: Specifications Hardware Microphone/Receiver. Wireless headset via Bluetooth capability. Audio jack (mono). Expansion Slots • One microSD memory card slot—user accessible. External Connectors • One Low-Insertion Force (LIF) docking connector. • DC Power Jack. Power Management • • • • Battery Pack: Lithium Ion 5000 mAh capacity with 8-hour life under normal operating conditions (see page 258 for battery specifications). Advanced Smart Battery with gas gauge.
Chapter 7: Specifications Software 7.1.2 Software Platform • • XScale PXA270 @ 624 MHz, 32 bit RISC CPU. 128 MB flash, 128 MB RAM. Operating System Microsoft® Windows® CE 5.0. • Programming Environment • • • • • Psion Teklogix Mobile Devices SDK. Hardware Development Kit (HDK). .NET and C++ programming using Microsoft® Visual Studio® 2005. Java programming supporting JDK 1.2.2 or higher. Standard Protocol APIs: Windows sockets (CE .net). Application Software • • • • Internet Explorer 6.0 incl.
Chapter 7: Specifications Approvals - Desktop docking station with Type A and Type B USB connectivity and charge functions for an internal battery along with a spare battery. - USB cable supports ActiveSync without requiring a docking station. • Power supplies: - AC wall adaptor. - Automotive power adaptor. - Single-slot battery pack chargers. • Vehicle peripherals: - Non-powered cradle. - RAM Mount with screws. 7.1.
Chapter 7: Specifications Siemens MC75 GSM/GPRS/EDGE Radio Antenna port Hirose U.FL connector Antenna PCB antennas 2.1 dBi Transmit Power 802.11b: 32mW (+15 dBm) 802.11g: 28mW (+14.5 dBm) Frequency Range 2.400 - 2.4835 GHz Channels FCC: 11 ETSI: 13 TELEC: 13 RX Sensitivity -96dBm @ 1Mbps, -90dBm @ 11Mbps, -94dBm @ 6Mbps, -75dBm @ 54Mbps Data Rates 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps 254 Ikôn Rugged PDA (Windows CE 5.
Chapter 7: Specifications Bluetooth Radio 7.2.4 Bluetooth Radio Embedded (920 kbps serial interface) Bluetooth Version Ver 2.0 compliant (features Adaptive Frequency Hopping for better co-existence with 802.11 radio and Enhanced Data Rate (EDR) for up to 3Mbps data rate). Chip Antenna Gain 1dBi peak Transmit Power -3dBm (0.5mW) minimum, +4dBm (2.5mW) max Frequency Range 2.400–2.4835 GHz RX Sensitivity (BER<0.1%) -80dBm max Data Rate V1.2 = 732.2 kbps and 57.6 kbps asymmetric, 433.
Chapter 7: Specifications Scanner/Imager Specifications Description Specification Max. charge voltage 4.2V +/- 1% Recommended charge termination timeout 5.0 hr - charging must stop. Charge Temperature 0°C to +40°C (32°F to +104°F) Discharge Temperature -20°C to +50°C (-4°F to +122°F) Storage Temperature -20°C to +50°C (-4°F to +122 ºF). Storage at elevated temperatures not recommended. 25°C (77 ºF)—recommended storage temperature.
Chapter 7: Specifications SE 955HP Decode Zone 7.4.1.1 SE 955HP Decode Zone Decode Zone Typical 4 mil 1.0 in. – 5.5 in. / 2.54 cm – 13.97 cm 5 mil 1.25 in. – 8 in. / 3.18 cm – 20.32 cm 7.5 mil 1.5 in. – 13.25 in. / 3.81 cm – 33.66 cm 10 mil 1.5 in. – 17.5 in. / 3.81 cm – 44.45 cm UPC 100% 1.5 in. – 23.5 in. / 3.81 cm – 59.69 cm 15 mil 1.5 in. – 29.5 in. / 3.81 cm – 74.93 cm 20 mil 1.75 in. – 35.5 in. / 4.45 cm – 90.17 cm 40 mil * - 40 in. / * - 101.6 cm 55 mil * - 55 in. / * - 139.
Chapter 7: Specifications EV15 Imager Decode Zone 7.4.2.1 EV15 Imager Decode Zone 0 Lux to 100,000 Lux Mil Size Minimum Range Maximum Range Inches Inches 5 2.5 7 10 3 14 UPC 2 14.5 20 2.5 22 40 3 35.5 High quality symbols in normal room light. Ikôn Rugged PDA (Windows CE 5.
Chapter 7: Specifications SX5400* Imager Specifications 7.4.3 SX5400* Imager Specifications Optical Resolution 752H x 480V Field of view at 160mm 120mm (H) x 78mm (V) 41.1° (H) x 27.4° (V) Pitch angle ±45° Skew angle ±45° Ambient light 0 to 100,000 lux (full sunlight) 300 lux nominal Minimum contrast 10% Targeting Intuitive range finding 626 nm LED Self Illumination Red LED (standard) Supply voltage 5 V ± 10% Power supply 3.6 Volt DC nominal (2.7 - 5 Volts DC) Connectivity USB 1.
Chapter 7: Specifications SX5400 Imager Performance 7.4.3.1 SX5400 Imager Performance The table below presents the typical performance of the SX5400 Imager at 300 lux (@ 160mm focus when using Grade A photographic-quality bar codes). Shown are the average near, far, and Depth of Reading (DOR) numbers. Symbology Size (mil) Near Avg. (inches) Far Avg. (inches) DOR Avg. (inches) C39 7.5 4.0 7.0 3.0 C39 10 2.75 9.25 6.5 C39 15 2.25 11.0 8.75 PDF6.6 6.6 4.0 6.5 2.5 PDF10 10 3.25 9.
APPENDIX A PORT PINOUTS A.1 Docking Port Pinout Table A.1 Pin # Pin Name Signal Direction Relative To DPA DGND - VDD_EXT_PWR Input VDD_BATT_OUT Output Comment 1 GND 2 VDD_EXT_PWR 3 VDD_EXT_PWR 4 VDD_EXT_PWR 5 BATT_OUT 6 AUDIO_P Output Audio positive. 7 AUDIO_N Output Audio negative. 8 VDD_USBOTG Bi-directional USB Power (+5.5V). As output, supplies external devices when Ikôn is in USB Host mode. As input, charges battery when Ikôn is in USB Client mode.
Appendix A: Port Pinouts Audio Port Pinout Table A.1 Pin # A.2 Pin Name Signal Direction Relative To DPA Comment 11 USB_OTG_DP Bi-directional 12 USB_OTG_ID Input 13 GND 14 TXDATA Output RS-232 data transmit. Max bit rate 115 kbits/sec. 15 RXDATA Input RS-232 data receive. Max bit rate 115 kbits/sec. 16 GND DGND DGND - - Audio Port Pinout Table A.2 Pin # A-2 Pin Name Direction Relative To DPA Comment 1 HPR Output 2 HP_DETECT Input 3 N/C - Not connected.
Appendix A: Port Pinouts DC IN Port Pinout A.3 DC IN Port Pinout Table A.3 Pin # A.4 Signal Comment 1 DGND Side contact. 2 DGND Side contact. 3 VDD_ACDC Center contact pin. Battery 5000 mAh (CH3000): Contact Pinout Table A.4 PIN # 1 Signal Name BATT-RAW - DESCRIPTION Positive lead of battery. Plastic Rip - provides mechanical polarity. 2 BATT-RAW Positive lead of battery. 3 BATT-CLK SMBus data clock. 4 BATT-THERM Thermistor 10K NTC. 5 BATT-DATA SMBus bi-directional data line.
C APPENDIX SCU FOR 802.11B/G RADIO C.1 SCU Tabs . . . . . . . . . . . . . . . . . . . C.1.1 Main Tab . . . . . . . . . . . . . . C.1.2 Profile Tab . . . . . . . . . . . . . C.1.3 Status Tab . . . . . . . . . . . . . . C.1.4 Diags Tab . . . . . . . . . . . . . . C.1.2.1 SCU Security Capabilities. C.1.2.2 SCU EAP Types . . . . . . C.1.2.3 EAP Credentials . . . . . . C.1.2.4 ThirdPartyConfig . . . . . C.1.5 Global Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix C: SCU For 802.11b/g Radio SCU Tabs C.1 SCU Tabs This appendix provides details about each tab in the Summit Client Utility (SCU). For quick, step-by-step setup instructions, refer to “Configuring The Summit 802.11b/g” on page 13. The following sections provide a detailed description of each of the tabs available in the SCU—Main (below), Profile (page C-4), Status (page C-9), Diags (page C-9), and Global (page C-10). C.1.
Appendix C: SCU For 802.11b/g Radio Profile Tab • • C.1.2 Driver and SCU: These fields display the version of the device driver and the SCU that are running on the Ikôn. About SCU: This box provides details about the SCU software. Profile Tab The Profile tab allows you to define radio and security settings that are stored in the registry as part of the configuration profile. The profile you create and save is listed in the Active Profile drop-down menu in the Main tab. You can define up to 20 profiles.
Appendix C: SCU For 802.11b/g Radio Profile Tab The following table describes the options in the Radio attributes, Encryption, and EAP Type drop-down menus: Table C.1 Radio, Encryption, And EAP Menus Radio Attribute Description Value Default SSID Service set identifier (SSID) for Maximum of 32 characters. WLAN to which the radio connects. None Client Name Name assigned to radio & Ikôn into which it is installed. None Maximum of 16 characters. Power Save Power save mode for radio.
Appendix C: SCU For 802.11b/g Radio Profile Tab Table C.1 Radio, Encryption, And EAP Menus Radio Attribute • Description Value Default Credentials Authentication credentials for the selected EAP type. Refer to “EAP Credentials” on page C-7. User: Username or Domain/User- None name (up to 64 characters). Password: up to 64 characters. For PEAP: CA Cert–CA server certificate filename. Encryption Type of encryption used to protect transmitted data.
Appendix C: SCU For 802.11b/g Radio Profile Tab • PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traffic. Two different inner methods are used with PEAP: - EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate for use against Windows Active Directory and domains. - EAP-GTC, resulting in PEAP-GTC: This is for authentication with one-time passwords (OTPs) against OTP databases such as SecureID.
Appendix C: SCU For 802.11b/g Radio Profile Tab • • If the credentials are not specified in the profile, when the radio tries to associate using that profile, you will be prompted to enter the credentials. When prompted, you can enter valid credentials, enter invalid credentials, or cancel the operation. - If you enter valid credentials and tap OK, the radio will associate and authenticate.
Appendix C: SCU For 802.11b/g Radio Status Tab C.1.3 Status Tab The Status tab provides status information including IP address and MAC address for the client radio, IP address and MAC address for the AP, signal strength, channel, transmit power and data rate. C.1.4 Diags Tab Ping Address Ping Results Use the Diags tab as a troubleshooting tool.
Appendix C: SCU For 802.11b/g Radio Global Tab • • • C.1.5 C-10 Release/Renew: Obtains a new IP address through DHCP and logs all activity in the output area. Start Ping: Starts a continuous ping to the address in the text box next to this button. This is a toggle button so when you tap on it, it changes to Stop Ping. Closing this window or tapping on another button also stops the ping.
Appendix C: SCU For 802.11b/g Radio Global Tab The Global settings tab allows you to define radio and security settings that apply to all profiles, along with settings that apply specifically to the SCU. The Global settings in the table below can be edited in SCU: Table C.2 Global Tab Global Setting Description Value Default Roam Trigger If RSSI from AP is less than roam dBm: -50, -55, -60, -65, -75 trigger value, radio performs roam scan -70, -75, Custom or probes for an AP with stronger signal.
Appendix C: SCU For 802.11b/g Radio Global Tab Table C.2 Global Tab Global Setting Description Activates three CCX features: APassisted roaming, AP-specified maximum transmit power and radio management. WMM Use Wi-Fi Multimedia Extensions, also On, Off know as WMM. Off TX Diversity Defines how to handle antenna diversity when transmitting data to AP. -Main only: Use main antenna only. -Aux only: Use auxiliary antenna only. -On: Use diversity.
Appendix C: SCU For 802.11b/g Radio Global Tab Table C.2 Global Tab Global Setting Description Value Default Auth Timeout Specifies the number of seconds that An integer from 3 to 60. 8 the software will wait for an EAP authentication request to succeed or fail. If authentication credentials are specified in the active profile and the authentication times out, then association will fail.