Safety Manual

ManualsBrandsPRÜFTECHNIK Condition Monitoring ManualsElectronicsHandheld measurement device NFC 13.56 MHz

Safety and general information

Sicherheits- und allgemeine Hinweise

Informations générales et de sécurité

Información general y de seguridad

Veiligheids- en algemene informatie

Säkerhet och allmän information

Bezpečnostní a všeobecné informace

Informação geral e de segurança

安全信息

Printed in Germany DOC 50.601

Summary of content (7 pages)

PAGE 1
Safety and general information Sicherheits- und allgemeine Hinweise Informations générales et de sécurité Información general y de seguridad Veiligheids- en algemene informatie Säkerhet och allmän information Bezpečnostní a všeobecné informace Informação geral e de segurança © Copyright 2015 by PRÜFTECHNIK Condition Monitoring GmbH Printed in Germany DOC 50.
PAGE 2
This safety and general information document contains safety and information symbols that are relevant while using the system. The document contains detailed laser safety information. The following handling aspects are also dealt with: storage, care, maintenance, disposal and transport. Safety specifications, FCC requirements, notes on data storage, general information, and system warranty form part of this document.
PAGE 3
Do not look directly into the laser beam at any time. (The natural blink reaction of the human eye is normally sufficient to protect the eyes from any dangers posed by looking at the WARNING laser beam briefly. But as natural blink reaction may fail to occur, care should be taken to avoid staring into the beam.) Do not insert any optical devices into the beam path. The LED on the front of sensALIGN laser illuminates whenever the laser beam is emitted.
PAGE 4
Care All optical surfaces (laser aperture, sensor lens) must be kept clean. Use the supplied lens cleaning cloth. Avoid vigorous polishing to preserve the anti-reflective coatings of the glass elements. ROTALIGN touch computer housing may be wiped clean using a soft cloth dampened with a mild, non-abrasive detergent (use soapy water with only 1% mild soap in water). The display should be cleaned using a soft lint-free dry cloth.
PAGE 5
Notes regarding data storage As with any data processing software, data may be lost or altered under certain circumstances. PRÜFTECHNIK strongly recommends that you keep a backup or printed record of all important data. PRÜFTECHNIK assumes no liability for data lost or altered as a result of improper use, repairs, defects, battery replacement/ failures or any other cause.
PAGE 6
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
PAGE 7
IC requirements Statement according to RSS Gen Issue 3, Sect. 7.1.3 This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.