User Manual

ManualsBrandsProxxon ManualsDrill Presses37110

Small and beautiful - the accurate mill for lab, optician, jewelry,

electronic and model building projects.

Note:

Optionally this machine may also be used with our three-jaw steel drill chuck.

The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality

aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24

pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the

finest cutters. Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32",

1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.35, 3.0, 3.2mm). The table is fitted with three T-slots of the 15/32" x

15/64" x 13/64" (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. All

hand wheels are zero adjustable with 1 revolution = 1/32" (1.0mm), 1 division = .002" (0.05mm).

Technical data:

Speed 5,000 - 20,000rpm

Table Size 7 7/8" x 2 3/4" (200 x 70mm)

X-Y Travel 5 17/64" and 1 13/16" (134 and 46mm)

PROXXON - MF 70

Summary of content (4 pages)

PAGE 1
PROXXON - MF 70 1 Small and beautiful - the accurate mill for lab, optician, jewelry, electronic and model building projects. Note: Optionally this machine may also be used with our three-jaw steel drill chuck. The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. All axes are play-free and have adjustable slides.
PAGE 2
PROXXON - MF 70 Vertical Travel Footprint Size Height Max. Power Volts Weight 2 2 3/4" (70mm) 5 7/64" x 8 55/64" (130 x 225mm) 13 25/64" (340mm) 1/8hp (100W) 110 - 120V AC, 60Hz 15.5 lb (7kg) NO 37 110 WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Hand wheels with zero adjustable scales: 1 revolution = 3/64" (1.
PAGE 3
PROXXON - MF 70 3 Milling Cutters These double flute cutters are made from solid tungsten and are to be used for clockwise cutting. The fishtail profile ensures cutting to the center, allowing boring. Usable on cast iron, hardened cast iron, steel, cast steel, brass, aluminum, and even glass, plastics and carbon fiber. The set includes one each of 1/32", 5/64" and 7/64" (1.0, 2.0 and 3.0mm) shank diameter: 7/64" (3.0mm).
PAGE 4
PROXXON - MF 70 4 Step clamps steel made Included in the compound table but can be ordered separately (2 step blocks and clamps, T-slot nuts of MICROMOT standard, bolts). This set also fits the Mill/Lathe System PD 230/E and FF 230, secures objects to approx. 0.7".