Datasheet
222
Design Patent
D
M
/
0
7
5
5
64
A
l
l
r
i
g
h
t
s
b
y
P
R
O
X
X
O
N
Note:
Our designers prefer die-cast aluminium. A refined, rust-proof and statically solid
material. Fittings and feeds are machined on our highly modern CNC-controlled
machines (milled, line-bored, lathed, etc.). Pure precision !
Universal holder UHZ
With ball joint. Can be rotated and
swivelled in all directions.
20mm collar for MICROMOT drilling and milling devices,
such as FBS 240/E, FBS 12/E,
IBS/E, LBS/E, MICROMOT
50, 50/E and 50/EF.
Made of die-cast ZINC.
With clamp for quick
and secure fastening
to workbenches and
table tops up to 60mm thick-
ness. Alternatively, it can also be
fixed to any workplace with
2 standard screws.
NO 28 610
MICROMOT drill stands made of die-cast aluminium parts.
With CNC-machined guides and fits. A whole different world.
MICROMOT drill stand MB 200
MICROMOT drill stand
MB 140/S
Offers a sensitive feed set-up via drive disc
and ball bearing system.
Throat capacity (column inside to centre of tool)
140mm with toggle screws for simple coarse
height adjustment. Travel 30mm. Also
with standard 20mm collar. The
mill/drill collar tilts through
90° in both directions. Other
technical data related to table and
column are the same as for the above menti-
oned drill stand MB 200.
NO 28 606
Head with dovetail guides can be tilted through 90° (scale ring available).
Enables bevelled drilling and versatile milling operations.
Geared rack and pinion feed with return spring allowing eortless and sensi-
tive operation. Practical drill depth scale with adjustable limit stop (maximum
travel 40mm). With standard 20mm collar for MICROMOT drilling and milling
devices. With solid, hard chromium-plated steel column (280 x 20mm), throat
capacity (column inside to centre of tool) 140mm.
Plane-milled table (220 x 120mm) with parallel limit stop and scale. Drilled,
tapped holes for securing the MICRO compound table KT 70 and holes to x
the drill stand itself are also provided. Weight 2.2kg.
NO 28 600
Machine vice MS 4
Die-cast zinc.
With three machined sides. The slot fits the adjustable fence of the drill stands
MB 200 and MB 140/S as well as the bench drill TBM 220.
Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm.
Maximum clamping width 34mm.
NO 28 132