Wiring Drawing

RoxIQ™

Dual-Tech, Smart Card & BLE Readers

Installation

Installation Steps

Mount the reader back plate.

Attach pigtail connector to reader

Wire the included pigtail

Mount reader onto the backplate

Insert set screw

Wiring Drawing*

*CAT6 cable/ Maximum Length 1000’

Controller Data Sheet for Specs

and Wiring

https://www.proxess.com/Data-Sheets

Controller and ACS Programming

https://www.proxess.com/Data-Sheets/Support-Documents

proxess

.com

PAGE 1
RoxIQ™ Dual-Tech, Smart Card & BLE Readers 1 2 Mount the reader back plate. Wire the included pigtail Installation Wiring Drawing* Installation Steps *CAT6 cable/ Maximum Length 1000’ 3 Attach pigtail connector to reader 4 Mount reader onto the backplate 5 Insert set screw Controller Data Sheet for Specs and Wiring https://www.proxess.com/Data-Sheets Controller and ACS Programming https://www.proxess.com/Data-Sheets/Support-Documents proxess.
PAGE 2
RoxIQ™ Dual-Tech, Smart Card & BLE Readers FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.