Product Specs

ManualsBrandsProwise ManualsElectronicsNFC Module

Shenzhen KTC Commercial Display Technology CO.,LTD.

NFC Module

Model Number: PN7150

Product Descrition：

Best plug´n play and high-performance full NFC solution PN7150 is a full NFC controller solution

with integrated firmware and NCI interface designed for contactless communication at 13.56

MHz. It is compatible with NFC forum requirements.PN7150 is designed based on learnings from

previous NXP NFC device generation.

Product specification

Frequency Band:

13.110 MHz to 14.010 MHz

Nominal Operating

Frequency:

13.56 MHz

Work in Modes:

Card Emulation

Reader/Writer

Peer-to-Peer

NFC Type:

NFC A Type

NFC B Type

NFC F Type

NFC V Type

Max. Data Rates:

848 Kbps

Type of Modulation:

ASK

Number of Channels:

Antenna Type:

Integral Antenna

Maximum Field Strength:

61.07 dBµV/m at 3 meter

Normal Test Voltage:

3.3 Vdc

Extreme Test Voltage:

3.0 Vdc to 3.6 Vdc

Extreme Test Temperature:

-30 °C to +85 °C

FCC Statement:

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditio

ns:

(1) this device may not cause harmful interference

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

Summary of content (5 pages)

PAGE 1
Shenzhen KTC Commercial Display Technology CO.,LTD. NFC Module Model Number: PN7150 Product Descrition： Best plug´n play and high-performance full NFC solution PN7150 is a full NFC controller solution with integrated firmware and NCI interface designed for contactless communication at 13.56 MHz. It is compatible with NFC forum requirements.PN7150 is designed based on learnings from previous NXP NFC device generation. Product specification Frequency Band: Nominal Operating Frequency: 13.110 MHz to 14.
PAGE 2
Shenzhen KTC Commercial Display Technology CO.,LTD. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
PAGE 3
Shenzhen KTC Commercial Display Technology CO.,LTD. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. When the module is installed inside another device, the user manual of this device must contain below warning statements; 1.
PAGE 4
Shenzhen KTC Commercial Display Technology CO.,LTD. Industrie Canada pour fonctionner avecles types d'antenneénumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclusdanscetteliste, etdont le gain estsupérieur au gain maximal indiqué, sontstrictementinterdits pour l'exploitation de l'émetteur. This device is intended only for OEM integrators under the following condition: The transmitter module may not be co-located with any other transmitter or antenna.
PAGE 5
Shenzhen KTC Commercial Display Technology CO.,LTD. l'utilisateur du produit final qui intègrece module. Le manuel de l'utilisateur final doitincluretoutes les informationsréglementairesrequises et avertissementscommeindiquédanscemanuel. Type d'antenne Antenne Intégrale le gain d'antenne Max gain: 0dBi The module must be installed in TV set and TV monitor have shielding.