Installation Guide

Installation Guide
The M-WN321GM 54M Wireless USB Module gives you the flexibility to install the wireless
system, such as wireless printer server, in the most convenient location available, without the cost
of running network cables. In fact, this module has 8 final models because of its different
specification of pin number, input voltage and antenna type. Generally, they can be divided into
two kinds according to its input voltage. Users can choose appreciate model according to actual
use.
In this guide, we take M-WN321GM_36S and wireless print server as a reference to show its
installation. This model is 6pin connector, its input is 3.3V and antenna type is RP-SMA.
1. Before install it into your product, please read next information which show the module’s pin
description, it is compatible with standard USB2.0, and for the actual product, the right turn is
from right to left (the pin connector is on upside, just like below picture shows).
2. For using the module into your device, you should make sure the device has the same pin hole
and the right pin definition. Below is the sample of wireless print server’s main board. This print
server has six pin holes and it is designed according to standard USB2.0. the pin hole’s turn is
from left to right.