PW-MN421 Wireless Lite-N USB Module
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of PROWARE TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from PROWARE TECHNOLOGIES CO., LTD. Copyright © 2013 PROWARE TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark General authorization required for outdoor use and Bulgaria public service France Outdoor use limited to 10 mW Military Radiolocation use. Refarming of the 2.4 GHz e.i.r.p. band has been ongoing in recent years to allow current within 2454-2483.5 MHz the band relaxed regulation.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ........................................................................................... 2 1.1 Overview of the Product .......................................................................................... 2 1.2 Features ..................................................................................................................
Package Contents The following items should be found in your package: ¾ PW-MN421 Wireless Lite-N USB Module ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Conventions: The ‘Module’ mentioned in this user guide stands for PW-MN421 Wireless Lite-N USB Module without any explanations.
PW-MN421 Wireless Lite-N USB Module Chapter 1 Introduction Thank you for choosing the PW-MN421 Wireless Lite-N USB Module! 1.1 Overview of the Product The module is an 802.11n client device. It is mainly designed to provide a high-speed and unrivaled wireless performance for wireless embedded system application. With a faster wireless connection, you can get a better Internet experience without the cost of running network cables. With the 802.
PW-MN421 Wireless Lite-N USB Module Chapter 2 Installation Guide 2.1 Hardware Installation PW-MN427_56I has a 4-Pin onboard connector to transmit USB signal, and it is mainly designed to provide stability wireless function and performance for your system. For installation, you must be sure to connect this module to your device or system’s compatible connector, sometimes you should use a connecting wire first. Then, the promoted Found New Hardware Wizard will pop up if the Module is installed correctly.
PW-MN421 Wireless Lite-N USB Module Figure 2-1 2. Soon, Figure 2-2 will display after a moment. Click Next to continue. Figure 2-2 3. After that, you should choose a Setup type. It is recommended that you select Install Client Utilities and Driver. Select Install Driver Only to install driver only, select Make Driver Installation Diskette(s) to make the diskette(s) as the installation driver (shown in Figure 2-3). Click Next to continue.
PW-MN421 Wireless Lite-N USB Module Figure 2-3 4. Click Browse… to change the destination location for the software, then click Next in the screen below (shown in Figure 2-4). Figure 2-4 5. After that, select the program folder, you should create a new folder name or select one from the Existing Folders list. It is recommended that you keep the default setting. Click Next to continue the installation.
PW-MN421 Wireless Lite-N USB Module Figure 2-5 6. Choose configuration tool, if you are not sure, please leave it default. Then click Next to continue. Figure 2-6 7. Click OK to continue the Installation. Wait a while for the setup as shown in Figure 2-7.
PW-MN421 Wireless Lite-N USB Module Figure 2-7 ) Note: For Windows XP, the Setup Wizard will notify you of how to proceed with the installation during these steps (shown in Figure 2-8). Our drivers have been tested thoroughly, and are able to work with the operating system. Click Continue Anyway to continue the Installation. Figure 2-8 8. After all the steps above, you will see the screen below, click Finish to reboot the system.
PW-MN421 Figure 2-9 8 Wireless Lite-N USB Module
PW-MN421 Wireless Lite-N USB Module Appendix A: Specifications Normal Interface USB 2.0 Interface Standards IEEE802.11n; IEEE802.11g; IEEE802.11b; Operating System Windows XP, Vista, 7 Throughput 150Mbps (Maximal) 11b: 11/5.
PW-MN421 Wireless Lite-N USB Module Appendix B: Glossary ¾ 802.11b - The 802.11b standard specifies a wireless product networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. ¾ 802.
PW-MN421 Wireless Lite-N USB Module developed by the military for use in reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and thus easier to detect, provided that the receiver knows the parameters of the spread-spectrum signal being broadcast.