Table of Contents FORE Ep L Introduction generalize Information .. 1.2 Features . 1.3 Check list .. ’ 2. Installing the monitor 2.1 Installing and removing the swivel base . ., 2.2 Power cable connection .. 2.3 Signal cable connection "2.4 Microphone and speaker cable connection (optional). 2.5 Power Adjust the picture 3. Operation 3.1 Power ON/OFF switch 3.2 Power (DIMS) indicator 3.3 Using the volume and OSD control 3.4 OSD menus . 3.5 Volume mute (optional function) .. 3.6 Built in Microphone 3.
ENGLISH Introduction PENT RR EA MW Microsoft Windows 95/Windows 98 compatible & VASE Display Data Channel (DDC) 1/28 compatible. ME Side-mount provision for optional speakers MS country language on 0815 which you can choice.it includes English.Spanish. German France. Chinese. Ml Built-in microphone to optimize speakerphone functionality. {Optional} 1.3 Check list Before operating this monitor.
Ce Installing the monitor TE ; < RESET TET AEE ENGLISH Stifling and removing the swivel base (for Bz Series) 2.2 Power cable connection Plug power cord into the power supply of PC or into the wall outlet of the power. A three wire cord is provided as a safety precaution to ensure proper electrical grounding. i 2.3 Signal cable connection The monitor has an built in signal cable with a male 15-| mini D-sub connector.
er —— Installing the monitor O Te 2 SPEAKER) = 70 SPEAKER) v 0 15% OUTPUT FOR SPEAKER ]] « MAX, CURRENT 250mA SOUND CARD MIC i FGA optional peckers) Connecting the monitor to the computer and he Power supply (For PX/PK/PRO series) ' Connecting the speakers and speaker cables (For PA/SA series) rou 5-12 wv i. onion wren optional spacers] .
Installing the monitor ETH ARCH PRR HG. A ARJAK-SOVPRO £10 FIG. 8 optional speakers! Connecting the speakers and speaker cables (For EZ series) NOTE: How to attach and connect the optional speakers to your monitor. Please refer to the user's manual of speakers, Installing the monitor 2.5 Power ON : Switch ON the power to both the monitor and your computer. After the monitor is power ON, the LED lights up green. If the LED become to flash, check the video cable connection, 2.
mn 3.1 Power on/off switch. ! This button is used to turn the monitor on and of f 3.2 Power (DIMS) indicator This indicator lights up green when the monitor operates normally. If the monitor is energy saving (stand-by / suspend / power off), this LED become to flash. 3.3 Using the volume and OSD control This OSD control knob is a multi-function controller. 1. There is no menu on screen, turning the knob clockwise or counter, clockwise which causes the volume bar appears. At this time.
change to green . You can select other function to make adjustments. Also you can select EXIT icon and press “MENU” key to go back main menu , Step 8: Repeat step 2 through step 7 to make further adjustments . Step 9: Press "EXIT" key in any step . you can exit the OSD menu . 3.4 OSD menus 1. Main menu OSD main menu of controls give you an overview of the selection of controls available . RESET( mt ): Resets the currently highlighted control to the factory setting.
<. POSITION: POSITION Eo ® d. GEOMETRY: GEOMETRY H-Position: To move the picture image horizontally left or right. V-Position: To move the picture image vertically up or down. PINCUSHION: To increase or decrease the curvature of the sides either inward or outward. TRAPEZOIDAL: To increases or decreases the bottom of the screen to be the same as the top.
Operation EY TR NRE SAT SE 2 INFORMATION: 3.7 Timing Guide eee This multi-swanning monitor can automatically detect and dis INFORMATION INFORMATION: Display present mode several video modes. This monitor offers 12 factory preset m that cover most of the common video modes supported by poy . resolution and vertical frequency. graphics adapters. If the monitor recognizes one of the preset fir signals, it will recall that mode and any stored display adjust you have made.
monitor is powered up, il will automatically notify a Windows 95/ Windows 98 host computer of its scanning frequencies, capabilities and characteristics. Windows 95/Windows 98 will automatically recognize the connection of the monitor and select the appropriate display resolution. 3.9 Power management This monitor meets VASE DIMS (Display power management signaling} standards, and complies with both the EPA's energy star requirements and Europe's TCO NUTPICK'S power management requirement, The 4.
nation Technical Information 4.2 Signal connector pin assignment Picture Tube Diagonal 17 INCH 19 INCH T visible image area 15.70 inches 17.90 inches PE in Signal (D sub) Hr Sublingual connection Active Display Area 300 x 225mm 360 x 270mm 2 [Green 10 | Ground (Factory setting) 11.81 x clinches 14.71 x bullfinches 3 [Blue 11 | Ground Synchronization Range 4 Ground 12 | SDA (FOR DDC) Horizontal 30-kHz 30-kHz S| Self Test i3 | H. Sync . 6 |Red Ground [14] V.
Technical Information Picture: Please check these items Power cord and signal cable are securely connected. Monitor in pow save mode ? Adjust the brightness and contrast controls. Display image is too large or small: Use the OSD controls to adjust the image.