Table of Contents IMPORTANT SAFEGUARDS... 1. 1.1 General Information 1.2 Features. 2. InstalltionNu.eeieeccnesssnne reereosresssasesursatssnassIssanests rerersenensaarase underrepresented 3 2.1 Package 2.2 Precautions vines 2.3 Pedestal. ironic iin assassinates 2.4 How to Install/Remove The Swivel Base. 3. Connection to the computer... ensnare 6 3.1 Connecting the signal cable and the power Cable irises 6 3.2 Connecting the microphone and speaker 7 4. Front control location and functions...
St IMPORTANT SAFEGUARDS warnings: 1. Read all of these instructions. Save these instructions for later use, please. 2. Follow all warning and instructions marked on the product. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 5. Do not use this monitor near water.
where the cord with be abused by persons working obit. 11. For added protection for this monitor, when iris left unattended and unused furlong periods of time, unplug it from the wall outlet. this will prevent damage to the monitor due to power-line surges. 12. Dio not overload wall outlets and extension cords as this can result into fire or shock. 13.
1.2 Features 17-inch (43.18cm) flat screen, dot-pitch. Microprocessor-based design with digital control. Compatible with standard 18M VGA/XGA, EVA SAGA modes,as wel as VASE resolution standards. Universal power supply. PRIMP compliant .(optional) COSTCO EPA Energy Star compliant power saving. VASE Display Power Management (Compatibility.
NOTE: Before installing this monitor, please refer to the user's guides of your computer and video adapter to make sure if these equipment require any change of setting. 2.1 Package After unpacking the shipping carton,check if you have received the following items: * Your monitor * Microphone cable (optional) « This user's manual If any of these item are missing, please contact your dealer for technical support and customer service.
2.2 Precautions-when using this monster . NOTE: when positioning this equipment ensure that the mains plug and socket is easily accessible. To avoid eyes fatigue, do not use the color monitor in bright background sunlight or other light sources shine directly on the screen. Do not place the monitor near a heat source. Set up in a good ventilated environment, and ensure that the ventilation openings of the monitor are not covered. The heat from the monitor can dissipate properly.
2.4 How to Install/Remove The Swivel Base To attach the swivel base to the monitor, do the following 1. Carefully turn the monitor on its side or upside-down. 2. Locate the cavities at the bottom of the monitor. 3. Insert the pegs "3a" on the swivel base into these cavities. push firmly toward (CRT direction) the main unit until the latch "3b" at the bottom of the monitor clicks shut. This locks the swivel base to its place. 4.
3. Connection to the computer | Be CAIRO ANT RE CLL PT DIET aE WARNING: Please be sure the AC power to your Computer is "OFF" before connecting or disconnecting’ any display peripheral. ‘Failure to do so may cause serious personal injury as well as permanent damage to your computer equipment. Tut 3.1 Connecting the signal cable and the power cable TO SOUND CARD MIC IN OR DC 15V OUTPUT FOR SPEAKER. Follow the steps below to connect these cable. a.
AR200 FIG. A {optional speakers) FIG. 8 a. Connect one end of the microphone cable to the connector on the back of the monitor and the other and to the sound card of computer. b. Connect two of the speaker cable to cache side of speakers connector of monitor and the third speaker cable to the sound card of computer. ¢. DC 15V the back of the monitor) The DC 15V/250mA output provides power only for multimedia speaker. To connect the DC 15V output from monitor to speaker sets.
Coo eo PET ee | Nem] SET OEE 0 28 4.1 Operation @® Power (DO) + Press this knob, the sees LED @ Light and the poor is ON. + Press this knob again, the pergola LED @ disappears and the power is OFF. O Power LED (2) The power LED is located just to the left of power switch. This LED lights up Greer when the monitor operates normally. If the monitor is in Energy saving mode off ), this LED became to flash. » & A Adjustment : Allow you to increase parameter volume adjustment.
Function Control Indicator LED ( Those indicator LED illuminates when the select key to press. ¢% Suit-In Microphone { Option ) To connect the built-in microphone, insert one end of the enclosed microphone cable into the "MIC QUT" jack (at the rear of monitor), and insert the other and into the "MIC IN" jack of the computer's sound card. 4.
Pr ac bliss], EE Brightness and Contrast( 3% & O) You can directly press adjust function LED blank condition to adjust Brightness, and also you can press "keys to adjust contrast directly. Picture size (D&E) Press "select " key. The first LED will light (e 0 0). Press key to decreases or increases the vertical size of the image. Press "4 "or"p" key to decreases or increase the horizontal size of the image.
NOTE: 1. Only using factory preset video mode can use this function. 2. You can get the preset mode from chapter guide. Degassed Press two keys together the degassed function is effective, this function can eliminate the build-up of stray magnetic fields which alter t the correct scan of the electron beams and affect the purity of the screen colors, focus, and convergence. when pressed, your image will jump and waver a bit as the screen is demagnetized . 4.
Resolution Horizontal Vertical Mode (dots Lines) Remark | IBM/VGA 640X400 31.47 70 Non-interlaced IBM/VGA 640X480 3147 60 Non-interlaced VESALIUS 640X480 37.50 75 Non-interlaced VESALIUS 800X600 37.88 60 Non-interlaced VESALIUS 800X600 48.08 72 Non-interlaced VESALIUS 800 < 600 46.88 73 Non-interlaced IBM/XGA 1024 X 768 48.39 60 Non-interlaced VESALIUS 800 x 600 53.67 8s Non-interlaced VESALIUS 1024 X768 56.47 70 Non-interlaced VESALIUS 1024768 60.02 75 Non-interacted VESALIUS 1280 1024 63.
4.6 Power management This monitor meets VASE DIMS (Display power management signaling) standards, and complies with both the EPA'S energy star requirements and Europe's TCO NUTPICK'S power man agent. the following is the description of the power indicator for the power saving modes.
5. Technical information | 5.1 Products Specifications Picture bate Size: Dot pitch: Surface/transmission: 17-inch diagonal mm Tinted screen glass non-glare, black matrix Maximum viewable area Display size (factory setting) 300mm (H) X 255mm(V) (Adjustable) Synchronization range Horizontal frequency: Vertical frequency: 30-kHz (automatically) 50-120Hz (automatically) Max. Resolution 1280 X 1024 Max.
5.
troubleshooting | 1f your monitor is not performing properly, use the following troubleshoot. ing for quick solutions to common problems, If the problem persists, cal the dealer where you purchased the monitor. No Picture: Please check these items « Power cord and signal cable are securely connected. * Monitor in power save mode? + Adjust the brightness and contrast controls. Display image is too large or small: + Use the function keys to adjust the image.
ee FEDERAL COMMUNICATIONS This equipment has been tested and found to comply with the limits ofa Class B digital device.Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.