11, For added protection for this monitor, when it is left unattended and unused for long periods of time, unplug it from the wall owlet, This will prevent damage to the monitor due to power-line surges. 12. Do not overload wall outlets and extension cords as this can result into fire or electric shock. 13. Never push objects of any kind into this monitor through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
2. Installing the monitor To install the monitor, ensure that the power to the monitor computer system, and other attached devices is turned off, and follow these steps : 2.1. Installing and removing the swivel base To attach the swivel base to the monitor, do the following : 1. Carefully tum the monitor on its side or upside-down. 2. Locate the cavities at the bottom front of the monitor, 3.
EE The front control panel is shown in the following illustration. 3.1 Power on/off switch This button is used to turn the monitor on and off. 3.2 Power (DIMS) indicator This indicator lights up green when the monitor operates normally. If the monitor is energy saving (stand-by / suspend), this LED become to flash. 3.
‘There are addition information in the top and bottom of main menu. The descriptions as below : 4. Function explanation At top of menu. Give the highlight icon a function explanation in five language. b. There is sub-menu at bot torn of main menu. 2. Sub-menu You can choose the function you need according to 3.3 each function detail are described as following, A. BRIGHTNESS AND CONTRAST BRIGHT oo CONTRAST Page 6 You can adjust brightness and contrast after press knob.
E. COLOR COLOR = EEE. F. OSD osD UNBALANCE : To increase or decrease the curvature of the sides either to the left or right ROTATION : Rotates the entire display clockwise or counterclockwise, This control adjusts the color temperature of the screen image. 9300°K and 6500°K are preset by factory. You can not to adjustment, RED/GREEN/BLUE : User color. 9300°K: Which is bluer and brighter. 6800°K: Which is redder and closer to paper white.
Ee 3.5 Timing Guide This multi-scanning monitor can automatically detect and display several video modes. This monitor offers 7 factory preset modes that cover most of the common video modes supported by popular graphics adapters, If the monitor recognizes one of the preset timing signals, it will recall that mode and any stored display EE 3.
4.2 Signal connector pin assignment 4. Technical information 4.1 Products specifications 1 6 5 Picture tube 8 10 : 10vnch (25 40cm) diagonal I 15 Dot pitch: 026m Surface/transmission: “Tinted screen glass non-glare, black matrix ‘Maximum viewable area 9.06 (33em) diagonal Display satisfactory setting) 6.69 inch(V){ Adjustable) — Synchronization range Pin Assignment Horizontal frequency: 30-48K Hz 1 Red Video Vertical frequency: 50-150Hz Max. Resolution 1024x 768 2 Green Video Max.
eet erst en 4.3 Troubleshooting If your monitor is not performing properly, use the following troubleshooting for quick solutions to common probables, If the problem persists, call the dealer. Where you purchased the monitor. No Picture: Please check these items ® Power cord and signal cable are securely connected, ® Monitor in power save mode? ® Adjust the brightness and contrast controls. Display image is too large or small: ® Use the function keys to adjust the image.