Table of Contents IMPORTANT SAFEGUARDS. 1. Introduction .. 1.1 General Information er aaa 1 1.2 Features al 1 2. Installation. 2.1 Package 2.2 Precautions rate ae FUT 2.3 Pedestal een con 3. Connection to the computer 3.1 Connecting the signal cable and the power r cable. 3.2 Connecting the microphone and speaker cable (Optional) . 3.3 Connecting the USB cable (Only for USB model) 4. Front control location and functions 4.1 Operation . 4.2 Adjusting and programming 4.3 Built-in microphone 4.
I 11, For added protection for this monitor, when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the monitor due to power-line surges. 12. Do not overload wall outlets and extension cords as this can result into fire or electric shock. 13. Never push objects of any kind into this monitor through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
2. Installation NOTE: Before installing this monitor, please refer to the user's guides of your computer and video adapter to make sure if these equipment require any change of setting. 2.1. Package After unpacking the shipping carton, check if you have received the following items: ® Your monitor. ® This user's manual. ® Power cord. ® USB software (Only for USB model) ® USB cable (Only for USB model) If any of these item are missing, please contact your dealer for technical support and customer service.
A — A oo . Follow the steps below to connect these cable 3. Connection to the computer a. Plug the 15-pin monitor signal cable into the video signal connector located at the rear of the system, and lock the two screws to ensure firm grounding. b. This monitor is equipped with a universal power supply (100-240V). Please plug power cord into the power supply of PC or into the well outlet of the power. A three wire cord is provided as a safety precaution to ensure proper electrical grounding. 3.
I —— Ee a. Connect one end of the microphone cable to the connector on the back of the monitor and the other end to the sound card of computer. b. Connect two of the speaker cable to cache side of speakers connector of monitor and the third speaker cable to the sound card of computer. ¢. DC1I5V output: (On the back of the monitor or right side of the monitor) The DC 15V/250mA output provides power only for multimedia speaker.
5.2 Signal connector pin assignment 19-inch (43.26 em) diagonal 21-inch (53.34 om) diagonal 025 mm 0.25 om ‘intend serene glass non-glare, black matrix ted screen glass non-glare, black matrix (45.47 crm) diagonal (50.65 or) diagonal 360 mm (H) x 270 mm {V) (Adjustable) 400 ram (F1) x 300 mm (V) (Adjustable) | 5 14.17 inch (H) x 10.63 inch (V) (Adjustable) 15.
To adjust visual settings Please following the procedure of selection and adjusting an item using the OSD system as below steps for main functions adjustment. 1. One key model Step 1: Press and release the OSD control knob to activate the OSD menu. Step 2: Turn the knob to highlight the desired option of OSD icon. Step 3: Press and release the knob again to access the option. The color of the inner area of the OSD will changed from blue to green.
ADVANCED SELECT: [RGB] [5] [#5] MOIRE ADJUSTMENT: The screen image may shake slightly while the moire cancellation function normally [i] V.MOIRE: To increase or decrease the vertical moire of the image. [EE] H.MOIRE: To increase or decrease the horizontal moire of the image. Ei AUTO SIZING(Optional function): Use to auto calibration the size, position and geometric of the image by itself when video display mode is changed.
RE 4.3 Built-in microphone (optional) Built-in microphone to optimize speakerphone functionality. When used with multimedia computers. 4.4 Self test pattern The monitor may display a three colors test pattern. This is to indicate that the monitor is functioning properly, but the computer's video signal is not reaching the monitor. In this case, please make sure the video cable is properly connected. The test pattern will disappear when the monitor is able to receive the video signal.
4.7 Power management . This monitor meets VASE DIMS (Display power management signaling) 5. Technical information standards, and complies with both the EPA'S energy star requirements and Europe's TCO NUTPICK'S power management. The following is the description of 5.1 Products specifications the power indicator for the power saving modes. Picture tube Size: 17-inch (43.18cm} diagonal — Dot pitch: 0.26mm/ 0.
6. Troubleshooting If your monitor is not performing properly, use the following troubleshooting for quick solutions to common problems, If the problem persists, call the dealer. Where you purchased the monitor. No Picture: Please check these items ® Power cord and signal cable are securely connected. ® Monitor in power save mode? ® Adjust the brightness and contrast controls. Display image is too large or small: ® Use the function keys to adjust the image.