GPS Vehicle Tracker User Guide (Version V2.
At a Glance 1.1 Overview 1.2 Accessories Power cable/Relay/Microphone/SOS alarm Button 1.
Getting Started 2 2.1 Installing the SIM card Important: 1 A SIM card is required in order to use cellular services when connecting to GSM/LTE networks. 2 Keep the SIM card cellular network availability. 3 Note down the SIM card phone numbers which is device contacting numbers. Notice: Please install the SIM card before switching on the device. 2.2 Setting up and activating the device To set up and activating the device, you should send SMS to device numbers by mobile phone.
WHERE# 3.2 Via tracking platform www.protrack365.com Ask your distributor for log-in account and password. 4 Basic 4.1 LED indication 4.1.1 Red LED -Power status Slow flashing Solid bright Off Normal working (backup battery) Normal working (external power supplying) Power off 4.1.2 Green LED -Network status Quick flashing Slow flashing Off GSM/LTE initialization Normal working with GSM/LTE network No GSM/LTE signal 4.1.
4.2.3 Tele-cutoff (petrol/ electricity) control line (yellow) is connected to pin 86 of the Tele-cutoff (petrol/ electricity) relay (equal to the yellow line of the relay socket). 4.3 Input and Output cable (3 pin) Firmware updating interface/expanded function to reserve space. 4.4 MIC line (2 pin) Externally connect to microphone for voice monitor function 4.5 SOS line (2 pin) Externally connect to SOS switch for SOS function.
that the SIM card is installed correctly, if the installation is no problem, please replace the SIM card test again.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.