GPS Tracker User Guide (Version V1.
1 At a Glance 1.1 Overview 1.2 Accessories 1pc Lanyard 1pc USB cable 1pc User manual 1pc 3M tape 2 Getting Started 2.1 Installing the Micro SIM card Important: 1 A Micro SIM card is required in order to use cellular services when connecting to GSM networks. 2 Keep the SIM card GPRS availability 3 Note down the SIM card phone numbers which is device contacting numbers. Open the side plug, install the SIM card in the right direction, turn on the device.
2. Keep the device front face up & No metallic cases above the device which may affect signal as well. Such as the windshield which is pasted with metal thermal-protective coats or heating coating. 2.3 Setting up and activating the device To set up and activating the device, you should send SMS to device numbers by mobile phone. Setting server SMS: SERVER,2,vt.protrack365.com,8842# (The default setting) 3 Checking location 3.1 Via SMS URL# 3.2 Via tracking platform www.protrack365.
SOS,A,phone number1,phone number2,phone number3# 5.2 To activate voice monitor Use the preset SOS phone number to call the device’s SIM card number, once it is connected, it will enter voice monitor status. Note: The SIM card should be activated with call service. Alarm management 6 *When any kinds of alarms happened, device will send alarm to SOS numbers. 6.1 SOS alarm Long press the SOS number for 3 seconds, it will activate the SOS alarm. 6.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
GPS data will be only uploaded on at a setting time interval. Eg. MODE,3,60M# means every 60m, the device will upload one GPS data. NOTE:You can press the button to control the GPS in each working mode. Eg. Quick press for twice to activate the GPS to send data. Quick press for three times to disable the GPS to send data.