N21 User Manual Version 1.
Content 1. Introduction............................................................................................................................1 1.1 Specification......................................................................................................................2 1.2 Package Contents..........................................................................................................3 1.3 I/O Panel………………………………………………………………………………………………….4 2. Installation.............................
Precaution The motherboard is made up of many sophisticated integrated circuits and other components that are easily damaged by static electricity, Please read the manual and prepare the following instructions before installation: Please confirm that the size of the chassis is consistent with the motherboard before installation. Please do not tear up the serial number and agent warranty sticker on the motherboard before installation, otherwise it will affect standard of product warranty.
Chapter 1: Introduction 1.1Specification Model Processor Chipset RAM Display port Expansion port Storage Audio Network N21 Intel Celeron J4125（quad core，2.0 GHz, Turbo boost 2.7 GHz） Adopt Intel express chipset 1*SODDR4(can up to 16G) Integrated Intel HD Graphic card, Support 1*HDMI,1*DP 1*Mini-PCIE,, 1*M.2 2230 support WiFi 1* M.2 2280 support SATA N/A 4* Intel I210AT 1000M Lan, support wake on lan 4* RJ-45 1* 12V DC input I /O 1* HDMI,1*DP 2 *USB 3.
1.
Chapter 2 2.1 screw holes Place screws into the holes to secure the motherboard to the chassis . Place screws into the hold to secure the bottom panel to the chassis .
2.1 Pre-installation precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component . 2. To avoid damaging the motherboard components due to static electricity, Never place your motherboard directly on the carpet or the like . Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components . 3.
2.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
