User Manual of digital Set Top Box PAT1 02 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug.
Table of Contents Front and Rear Panel 1. Front panel Front and Rear Panel ........................................................................... 1 Remote Control.... ............................................................................... 2 Connections.........................................................................................3 First Time Installation........................................................................... 3 Troubleshooting......................................
Remote Control 27. REC: Used to record the program. 28. LIST: Used to show the record program list on the current disk . 1. MUTE: Mute or Restore Audio Output. (Also used with the USB play/record functions.) 2. INFO: Displays additional channel information. 3. BOOKING: Play channel, Press into schedule menu. Installing the Batteries 4. CC: When a digital signal is received, Service1, Service2,...
First Time Installation Connections Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power button to switch receiver on.
(2) Program Edit To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password '000000'. Set Favourite Program You can create a shortlist of favourite programs that you can easily access. Set Favourite TV or Radio program: 1. Select the pre ferred program then press the FAVOURITE button. A heart-shaped symbol will appear and the program is marked as a favourite. 2.
1. Aspect Ratio You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9 Full Screen or 4:3 Full, 16:9 Pillar Box, 16:9 PanScan Auto to get the maximum display when watching TV. 2. Resolution If the video does not appear correctly, change the setting. This setting is to match the most common setting for HDMI. [480i]: for NTSC system TV. [480P]: for NTSC system TV. [576i] for PAL system TV. [576P]: for PAL system TV. [720P]: for NTSC or PAL system TV. [1080I]: for NTSC or PAL system TV.
1. Time offset Select auto or manual for GMT offset adjustments. 2. Country Region Select the Country Region when [Time Offset] is set to Auto. 3. Time Zone Select the Time Zone Offset when [Time Offset] is set to Manual. 4. Sleep If this setting is off, this function does not work. If this setting is not off, but 1.2.3 hours ,for example select 4 hour, a message will pop up after 4 Hours, that the device will go in to sleep mode. This message will appear under no any operation.
2. Set Password Set or change the password for locked programs. Enter your old password or the default password '000000'. You will then be asked to enter your new password. To confirm re-enter your new password. Once it is confirmed, press EXIT to exit the Menu. 3. Restore Factory Default Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default] and press OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm.
57~213 MHz 473~803 MHZ ATSC cable not connected Plug in the ATSC cable -25~ -83dBm 6MHz 8VSB,256QAM,64QAM HDMI, CVBS Max 8W