How-To Guide

ManualsBrandsProMystic ManualsElectronicsColor Match

Table Of Contents

Blank Page

ProMystic Color Match

Thank you for purchasing ProMystic’s Color Match. Imagine – being able to know the

exact color being used at any moment in time!

Everything happens completely in the hands of the spectators. No visual cues! No

assistants! Do it anywhere, any time – surrounded, up close, and personal. Use one or

multiple participants. Color Match can be a closer for all your shows.

What you receive

Your package contains some or all of the following:

Markers – Multi Color Markers Crayola Brand

Close-Up Case - Close-up case for 3 markers (optional)

Transmitters – Five custom-made mag tags

Receiver – ProMystic modular receiver (optional)

Magnet – Neo Magnet for the pencil cup (please see WARNINGS)

Pencil Cup – Pencil cup for holding the Markers during performance

• Batteries:

- for receiver (2): CR2032

- for transmitters (1 each): CR1225 or BR1225

Color Match is Built with Quality to Last a Lifetime

www.promystic.com

Summary of content (7 pages)

PAGE 1
ProMystic Color Match Thank you for purchasing ProMystic’s Color Match. Imagine – being able to know the exact color being used at any moment in time! Everything happens completely in the hands of the spectators. No visual cues! No assistants! Do it anywhere, any time – surrounded, up close, and personal. Use one or multiple participants. Color Match can be a closer for all your shows.
PAGE 2
The Receiver How to turn it on and off Slide the on/off switch. (See photo, below left.) When you switch the receiver on, it will vibrate for one second, letting you know it is activated. It does not vibrate when you switch it off. How to install batteries The receiver comes with two CR2032 batteries already installed. When the batteries are drained, the receiver will give one long, weak buzz, or just stop working. You’ll notice that the range also decreases when the battery is low.
PAGE 3
Theory of Operation Color Match Color Match is performed by using five ProMystic Mag Tags installed into the markers. When the markers are placed on a magnetic base, like the one installed in a pen cup or the close-up marker holder, the tag will send the ‘number’ of the tag one time. You will receive the signal once. The receiver will repeat the number of the tag once, after it is placed on the magnet.
PAGE 4
Setting Up the Markers The Tags It is very important you follow these steps to protect your tags. WARNING! The ink in the markers is HIGHLY CORROSIVE! Don’t let the size of the tags fool you, they are quite complex both in design and environmental function. The tags have been specially engineered to prevent corrosion from nearly all chemicals, including acids, salts and other penetrating substances. The number marking on the tags may wear off as the ink pens cannot penetrate the plastic coating to adhere.
PAGE 5
Pencil Cup and Close-Up Case When performing with the pencil cup, use a 1/8 inch neo Magnet in the base of the cup. The magnet should cover the bottom of the pencil cup as much as possible. Try to avoid gaps in the edge that are more than ¼ of an inch. Place the markers into the cup; test the markers as shown in the video for proper operation. If you find there are ‘dead’ spots in the cup, position the tag higher in the marker.
PAGE 6
IMPORTANT WARRANTY Promystic products are warranted (i) against defects and workmanship and (ii) that when properly used , will execute their programmed instructions, for a period of 1 year from the date of product purchase. We will, at our option, repair or replace Promystic products that prove to be defective either upon your receipt or though normal usage.
PAGE 7
Model: CM FCC ID: 2ARYL-CM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Modification or changes to this equipment not expressly approved by the manufacturer may void the user’s authority to operate the equipment.