Promovec A/S Langdyssen 6 DK-8200 Aarhus N 1 About the user manual Dear users, in order to operate your electric car better, please read the 51206 user manual carefully before use. We will tell you every step of the instrument in the most concise language, from hardware installation and setup to normal use of the instrument. At the same time help you solve the confusion and obstacles that may arise.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 2 Outlook and size 2.1 Material and color 51206 products use PC and ABS materials. Under the temperature of -20 to 60℃, the shell material can ensure normal usage and good mechanical performance of the products. Dimension figure (unit: mm).
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 2.2 Button definition 51206 has three buttons, “ON/OFF”、 “+” and“-”.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 3 Function summary 51206 provides a wide range of functions and indicators to fit the users’ needs. The indicated contents are as below. 3.1 The basic display functions are as follows 3.1.1 PAS level 3.1.2 Battery capacity indication (default) 3.1.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N the display, hold the "power key ON/OFF" up to 2 seconds to shut down bike system. 3.3 Switch Light After powering on, hold the "+" up to 2 seconds then turn on the front light; hold the "+" again then turn off the front light. 3.4 Adjust PAS level In the power-on state of the display, press the "+" or "-" button to increase or decrease the PAS level correspondingly, and return to the battery capacity display after display show the PAS level for 3 seconds.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 4 Low battery voltage 5 5 Brake switch error 6 6 Speed sensor error 7 7 Battery error 8 8 Overcurrent 9 9 10 10 4 Communication error Overvoltage If voltage from the battery is too low. If brake switch is activated during power up or broken wire/connection detected. Broken wire/connection detected, or no wheel speed signal received.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 3.8 Auto power off in 5 minutes Speed keep up 0KM / H and have no any operator, system will turn off automatically in five minutes.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 4 Wire map definition Number Function 1 Battery - 2 RX on Display 3 Battery + 4 NA 5 TX on Display 6 Lock Performance parameters 4.1 Operating voltage : DC 36V, standard RS232 communication, baud rate 9600BPS. 4.2 With IP65 waterproof ability, suitable for outdoor use.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 5 General problems and solutions Q: Why the display is not able to power on? A: Checking the connector that between display and controller. Q: How to deal with the error code? A: Find the general repair methods according with error code, if cannot to resolve it, please repair it to repair points.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 6 Quality & Warranty Under normal use conditions, the company will be responsible for the limited warranty during the warranty period for the failure caused by the quality of the product itself. The warranty period is 18 months from the date of purchase of our products. The following conditions are not covered by warranty: 1. Dismantling and refitting without authorization. 2.
Promovec A/S Langdyssen 6 DK-8200 Aarhus N 7 Attention Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.