Learner Response Quick Start Guide Learner Response Systems Systems Quick Start Guide
Learner Response Systems Quick Start Guide Overview 2 What’s included? 3 What do you need? 3 Installation and setup 4 Registration 9 Voting 13 More info 21 Compliance 23 TP1788-EN Issue 1© 2010 Promethean Limited. All rights reserved. This guide is distributed with the product. It may only be reproduced for use within the institution in which the product is used.
Learner Response Systems Quick Start Guide This guide is for new and current users of both ActiVote and ActivExpression devices who want to run voting sessions with ActivInspire. It takes you through installation and setup, device registration, voting sessions and voting results. Vertical titles indicate which information applies to ActivInspire, and which is specific to either ActiVote or ActivExpression devices.
Learner Response Systems Quick Start Guide What ‘s included ? All devices are supplied with batteries inserted, ready to use. Your ActiVote or ActivExpression kit includes: * ActiVote devices or ActivExpression devices Carrying Case (not available with kits of 5 devices) Screwdriver Torx T10, 2.4GHz ActivHub, ActivHub holder, 1.8m USB extension cable ActivInspire 1.
Quick Start Guide Learner Response Systems Installation and setup Install ActivInspire or update from the Dashboard Firmware upgrade required? See page 7 Connect ActivHub to computer ActivExpression & ActiVote No Yes Change device language? No Register devices See page 9 Expression Activ Upgrade firmware See page 7 Yes Change device language See page 8 4
Learner Response Systems Quick Start Guide Update or install ActivInspire Update If you are using an earlier version of ActivInspire Professional Edition, you need to launch the software and update it from the ActivInspire Dashboard. Click to display options Get the latest version Install To install ActivInspire Professional Edition for the first time, insert the Installation Disk into your computer’s DVD-ROM drive. Then follow the instructions on the product’s DVD sleeve.
Quick Start Guide Learner Response Systems ActiVote Your device Indicators flash when data is transmitted or received Registration button Press to register the device during a registration session A-F buttons press to vote 8 Hotkeys Use to select options on screen Delete a/A/1 key Toggle between lower case, upper case and number input Menu/symbol key Enter Change device batteries ActivExpression On/Off Press and hold to power device on/off Use to register the device, change its language, diag
Learner Response Systems Quick Start Guide Connect the ActivHub The ActivHub enables LRS devices, your computer and other Promethean products to communicate with each other. Promethean devices are registered on the ActivHub. The ActivHub must Raise ActivHub antenna be plugged in before you can use any devices. Use the 1.8m USB extension cable if necessary.
Quick Start Guide Learner Response Systems ActivExpression Change the device language Press Menu Symbol Power on device Press Setup Hotkey Press a Language Hotkey Press for more Languages Device language has changed Select Language Press to end changes Press to return to Setup 8
Learner Response Systems Quick Start Guide Registration ActivInspire Device registration is the process of telling the ActivHub which types of LRS device there are in the classroom, how many there are, and their names. Select the Voting Browser You need to register LRS devices before you begin a voting session. You start registration from the Voting Browser in ActivInspire.
ActivInspire Quick Start Guide Learner Response Systems There are several options for naming devices in ActivInspire. The quickest way is to let ActivInspire allocate default names during registration. Alternatively, you can let your students name their ActivExpression devices during registration. You can rename both ActiVote and ActivExpression devices later. Whichever option you choose, devices must be powered on and within transmission range of the ActivHub.
Quick Start Guide ActivInspire displays a 3-letter PIN code. All students must enter the correct PIN. ActiVote ActivInspire Learner Response Systems ActivExpression PIN to be entered by students If you chose to let students name their ActivExpression device, they must enter the name now, using the hotkeys and keypad.
Quick Start Guide Learner Response Systems ActivInspire shows their Device name devices as registered. ActiVote ActivInspire As soon as students enter the correct PIN, Device Registration in ActivExpression Click to end registration Select device type You can check the Voting Browser at any time to see the list of devices registered on your ActivHub. Remember to plug in the ActivHub first. Registered devices You can register additional devices as necessary.
Learner Response Systems Quick Start Guide Voting Once your students have registered, they can use their devices to answer questions. There are three types of voting session. The table indicates which device types are suitable for each session. Session Device Type ExpressPoll Description Learners answer a quick or ad hoc question. You can hold an ExpressPoll at any time, even when there is no flipchart open.
Quick Start Guide Learner Response Systems ActivInspire ExpressPoll Use ExpressPoll to quickly ask a question and capture your learners’ responses. For example, to assess confidence at the start of a lesson, then to check for changes in perception later.
Learner Response Systems Quick Start Guide ActivInspire Type of question and number of possible responses Click to set timer (Optional) Click to Stop Vote Click to Close For more detailed information about using ExpressPoll, see the topic Quick questions and ExpressPoll in the ActivInspire Webhelp.
Quick Start Guide Learner Response Systems ActivInspire Prepared questions Use the Question Wizard in ActivInspire to prepare your own question pages in advance. From the Main Menu select Insert > Question.
Learner Response Systems Quick Start Guide Navigate to a flipchart page that contains a prepared question Click to Start Vote Click to set timer (optional) Click to Stop Vote For more detailed information, see the topic Prepared questions - Using the Question Wizard in the ActivInspire Webhelp.
Learner Response Systems Quick Start Guide Unlike prepared questions, where all learners respond at the same time, Self-Paced Question Sets allow learners to progress at their own pace. During a voting session, questions are not displayed on the flipchart page. Instead, learners receive and read each question on their ActivExpression devices. You prepare question sets with the Self-Paced Question Wizard which takes you through creating, editing and deleting questions.
Quick Start Guide Each response is displayed in ActivInspire as soon as it has been sent, and you can choose from several report formats. For more detailed information on the wizard, and on how to create and use question sets, see the topic Self-Paced Question Sets in the ActivInspire Webhelp.
Quick Start Guide Learner Response Systems ActivInspire Voting Results Voting results are displayed in pop-up windows in ActivInspire. You can: • Display results in different formats • Paste results into your flipchart • Identify correct answers • Access results later with the Results Browser • Export results from ExpressPoll and Prepared Questions to Microsoft Excel * * From ActivInspire 1.4 onwards, you can also export Self-Paced Question Set results.
Learner Response Systems Quick Start Guide More info ActivInspire Webhelp For detailed information about ActivInspire, voting sessions, and how to prepare question pages, see the ActivInspire Webhelp provided with the software. Launch ActivInspire and select Help > Contents or press F1 (Windows and Linux). Promethean Planet Promethean Planet is the fastest growing online community for interactive whiteboard users. • Download over 18,000 FREE lesson resources.
Quick Start Guide Learner Response Systems ActivLearning To take advantage of our FREE online training courses, go to: http://learning.prometheanplanet.com Technical Support For online support, self-help solutions and further support contact information, please visit the Promethean Knowledgebase at: www.prometheankb.
Learner Response Systems Quick Start Guide Compliance Statements for the ActiVote, ActivExpression and ActivHub United States of America These devices comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. 2. These devices may not cause harmful interference. These devices must accept any interference received, including interference that may cause undesired operation.
Quick Start Guide Learner Response Systems TP1788-EN Issue 1 © 2010 Promethean Limited. All rights reserved.
