Pyram Universal Mini Handsfree Bluetooth™ Speakers with MP3 Micro-SD Card Slot User Guide
Introduction Pyram is a universal mini Bluetooth™ speaker with hands-free function for all Bluetooth enabled mobile and tablet devices. Perfect for smartphone audio enhancement, lightweight and portable, Pyram provides amazingly clear sound. Choose to play by Bluetooth streaming from your smartphone or tablet, also by connecting 3.5mm audio cable to any music source, or even by simply inserting a micro-SD card with music tracks.
Appearance and Interface Description 1 Audio Jack 4 5 6 Mini- USB 7 2 3 Micro USB 8 9 10 2
1.)-Button In Bluetooth mode : •Press this button to adjust volume level down during Bluetooth mode . In TF card Playback mode : •Press and hold this button to adjust volume level down. •Short press this button once to return to the beginning of current track or previous track. 2.)+Button In Bluetooth mode : •Press this button to adjust volume level up during Bluetooth mode In TF card Playback mode : •Press and hold this button to adjust volume level up.
Technical Specification: •Bluetooth™: •Input power: •Output power: •Impedance: •Speaker frequency: •Signal-to-noise ratio: •Charging time: •Playing time: •Battery capacity: •Operating distance: Version 3.0 5V, 1A 2W 3 Ohms 90-15K 50dB 2 hours 2 hours 800mAh 10M Battery Charging Instruction This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V 500mA and up.
Notes: 1.)Charging time will vary if you are listening to music while charging the internal battery. We recommend you switch off the speaker power during the charging process. 2.)To prolong the life of a rechargeable battery, it is recommended to completely discharge it before fully charging it again . 3.)Rechargeable batteries need to be cycled for maximum performance and longer battery life.
If the speaker has ever been paired with a Bluetooth device before. You need to follow the pairing instructions below to link the speaker with your Bluetooth device . 1.)After turning on the speaker, the speaker will search for the last paired device . The operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device , a beep sound is heard and operating mode indicator will keep in blue and stop flashing . 2.
OPERATING THE SPEAKER IN AUX-IN MODE If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this unit via bluetooth directly, you can still play it on the speaker via an audio connecting cable. 1.)Plug one end of the 3.5mm audio cable (excluded) into the headphone or line out jack on your player, plug the other end of cable into the unit AUX-IN jack of the speaker. 2.)Turn on the external audio source and play your device. 3.
Troubleshooting Guide Should you experience difficulties in the use of this player, please refer to the following chart.
NO Sound The Pyram battery is dead. The Pyram is not linked with the cell phone. Volume set too low. No audio signal via the Bluetooth connection Speaker is not paired to the audio source. Volume too low Pairing does not work Speaker cannot connected be Poor sound quality from a ® Bluetooth device Recharge the Pyram battery. Go through “Speaker Operations” process to link the speaker. Increase the volume of your device. Check whether a connection exists.
