HEAVY DUTY DUAL BATTERY TRAY Tray Fitting Instructions to suit Auxiliary battery for TOYOTA LANDCRUISER 200 DS SERIES Years: September 2016 onwards Models: 1VD-FTV 4.5 Litre V8 Turbo Diesel P/No.
IMPORTANT SAFETY INFORMATION Please read this instruction thoroughly before fitting the tray. This product is recommend to be fitted by a workshop or qualified mechanical person. WARNINGS • Before installation, make sure that the vehicle is stationary and the wheels chocked. • Be careful when laying wires, not to cause any electrical shorts or wire breakage. • After installation ensure the bonnet can close without hitting the newly installed battery and battery tray.
FITTING INSTRUCTIONS 1. Make sure that the vehicle is stationary, the engine is switched off and cool Disconnect the negative terminal from the main battery. 2. Locate the tray behind the driver’s side headlight. 3. Locate the two captive nuts with the two holes in the tray and secure with the 2 x M6 countersunk bolts. 4. Remove the radiator cover panel, replace after battery secured. 5. Fit Auxiliary battery. 6.
WARRANTY STATEMENT APPLICABLE ONLY TO PRODUCT SOLD IN AUSTRALIA Brown & Watson International Pty Ltd of 1500 Ferntree Gully Road, Knoxfield, Vic.